Bouncing Dynamics of Impact Droplets on the Biomimetic Plane and Convex Superhydrophobic Surfaces with Dual-Level and Three-Level Structures

Multi-Scale Structure and Directional Hydrophobicity of Titanium Alloy Surface Using Electrical Discharge

Titanium alloys with special macro-micro composite structures of directional hydrophobicity are difficult to prepare due to poor thermal conductivity and good corrosion resistance, inhibiting the wide engineering applications for aerospace, marine engineering, and biomedicine. To prepare macro-micro composite structures on the surface of titanium alloys and achieve directional hydrophobicity, the sub-millimeter structures with an edge width of 150 μm, a groove width of 250 μm, and a depth of 250 μm were fabricated on the titanium alloy by wire electrical discharge machining (WEDM) technology, and high voltage-induced weak electric arc machining (HV-μEAM) was used to fabricate micro-scale feature size micro-structures on the processed macro-structure edges. The influence of process parameters on the morphology of microstructures was studied experimentally. The smooth surface of the titanium alloy is isotropically hydrophilic, and its contact angle is 68°. After processing the macrostructure on the titanium alloy surface, it shows directional hydrophobicity after being modified by low surface energy materials. The macro-micro composite structure formed by HV-μEAM realizes a directional hydrophobic surface with contact angles (CA) of 140° (parallel direction) and 130° (perpendicular direction), respectively. This surface has been modified with low surface energy to achieve contact angles of 154° and 143°. The results of the abrasion resistance test show that under the load of 100 g, it retains directional hydrophobicity at a friction distance of 700 mm with 600# sandpaper. The existence of the sub-millimeter macrostructure is the reason for the directionality of surface hydrophobicity. The microstructure can realize the transformation of the titanium alloy surface from hydrophilic to hydrophobic. Under the combined effects of the macro and micro composite structure, the surface of the titanium alloy shows obvious directional hydrophobicity.

Recent advances in bioinspired superhydrophobic ice-proof surfaces: challenges and prospects

Bionic superhydrophobic ice-proof surfaces inspired by natural biology show great potential in daily life. They have attracted wide research interest due to their promising and wide applications in offshore equipment, transportation, power transmission, communication, energy, etc. The flourishing development of superhydrophobic ice-proof surfaces has been witnessed due to the availability of various fabrication methods. These surfaces can effectively inhibit the accumulation of ice, thereby ensuring the safety of human life and property. This review highlights the latest advances in bio-inspired superhydrophobic ice-proof materials. Firstly, several familiar cold-resistant creatures with well-organized texture structures are listed briefly, which provide an excellent template for the design of bioinspired ice-proof surfaces. Next, the advantages and disadvantages of the current techniques for the preparation of superhydrophobic ice-proof surfaces are also analyzed in depth. Subsequently, the theoretical knowledge on icing formation and three passive ice-proof strategies are introduced in detail. Afterward, the recent progress in improving the durability of ice-proof surfaces is emphasized. Finally, the remaining challenges and promising breakthroughs in this field are briefly discussed.

Optimization Strategy to Inhibit Droplets Rebound on Pathogen-Modified Hydrophobic Surfaces

The deposition and retention of pesticide sprays on the surface of hydrophobic plant leaves is a major agricultural challenge, and the deposition of hydrophobic surfaces caused by plant leaf diseases is also a major agricultural problem. Many recent studies have focused on evaluating the effect of adding surfactants to water rather than to pesticide solutions to increase the deposition and retention of spray liquids. Here, we report a strategy to solve the problem of deposition and retention by studying the impact of the behavior of pesticide droplets with added surfactants and performing kinetic analysis on cucumber leaves with powdery mildew. The reduction in the bounce and splash of the pesticide droplets was analyzed by combining the pinning site formed in the retraction stage and the viscous dissipation in the rebound stage. In the practical application of the pesticide spray, we can clearly see that the bounce, splash, and powdery mildew spore ejection decreased when surfactants were added to the pesticide spray that was used on the cucumber leaves, and the adhesion and retention increased. The proposed comprehensive method is helpful for understanding the interactions between pesticide spray droplets and the surface of cucumber leaves with powdery mildew.

Bio-Inspired Design of Bi/Tridirectionally Anisotropic Sliding Superhydrophobic Titanium Alloy Surfaces

Many biological surfaces with the multi-scale microstructure show obvious anisotropic wetting characteristics, which have many potential applications in microfluidic systems, biomedicine, and biological excitation systems. However, it is still a challenge to accurately prepare a metal microstructured surface with multidirectional anisotropy using a simple but effective method. In this paper, inspired by the microstructures of rice leaves and butterfly wings, wire electrical discharge machining was used to build dual-level (submillimeter/micrometer) periodic groove structures on the surface of titanium alloy, and then a nanometer structure was obtained after alkali-hydrothermal reaction, forming a three-level (submillimeter/micrometer/nanometer) structure. The surface shows the obvious difference of bidirectional superhydrophobic and tridirectional anisotropic sliding after modification, and the special wettability is easily adjusted by changing the spacing and angle of the inclined groove. In addition, the results indicate that the ability of water droplets to spread along parallel and perpendicular directions on the submillimeter groove structure and the different resistances generated by the inclined groove surface are the main reasons for the multi-anisotropic wettability. The research gives insights into the potential applications of metal materials with multidirectional anisotropic wetting properties.

A Numerical Investigation on the Collision Behavior of Unequal-Sized Micro-Nano Droplets

Micro-nano droplet collisions are fundamental phenomena in the applications of nanocoating, nano spray, and microfluidics. Detailed investigations of the process of the droplet collisions under higher Weber are still lacking when compared with previous research studies under a low Weber number below 120. Collision dynamics of unequal-sized micro-nano droplets are simulated by a coupled level-set and volume of fluid (CLSVOF) method with adaptive mesh refinement (AMR). The effects of the size ratio (from 0.25 to 0.75) and different initial collision velocities on the head-on collision process of two unequal-sized droplets at We = 210 are studied. Complex droplets will form the filament structure and break up with satellite droplets under higher Weber. The filament structure is easier to disengage from the complex droplet as the size ratio increases. The surface energy converting from kinetic energy increases with the size ratio, which promotes a better spreading effect. When two droplets keep the constant relative velocity, the motion tendency of the droplets after the collision is mainly dominated by the large droplet. On one hand, compared with binary equal-sized droplet collisions, a hole-like structure can be observed more clearly since the initial velocity of a large droplet decreases in the deformation process of binary unequal-sized droplets. On the other hand, the rim spreads outward as the initial velocity of the larger droplet increases, which leads to its thickening.