Nanostructured Nickel Nitride with Reduced Graphene Oxide Composite Bifunctional Electrocatalysts for an Efficient Water-Urea Splitting

Bifunctional Electrocatalysts for Overall and Hybrid Water Splitting

Electrocatalytic water splitting driven by renewable electricity has been recognized as a promising approach for green hydrogen production. Different from conventional strategies in developing electrocatalysts for the two half-reactions of water splitting (e.g., the hydrogen and oxygen evolution reactions, HER and OER) separately, there has been a growing interest in designing and developing bifunctional electrocatalysts, which are able to catalyze both the HER and OER. In addition, considering the high overpotentials required for OER while limited value of the produced oxygen, there is another rapidly growing interest in exploring alternative oxidation reactions to replace OER for hybrid water splitting toward energy-efficient hydrogen generation. This Review begins with an introduction on the fundamental aspects of water splitting, followed by a thorough discussion on various physicochemical characterization techniques that are frequently employed in probing the active sites, with an emphasis on the reconstruction of bifunctional electrocatalysts during redox electrolysis. The design, synthesis, and performance of diverse bifunctional electrocatalysts based on noble metals, nonprecious metals, and metal-free nanocarbons, for overall water splitting in acidic and alkaline electrolytes, are thoroughly summarized and compared. Next, their application toward hybrid water splitting is also presented, wherein the alternative anodic reactions include sacrificing agents oxidation, pollutants oxidative degradation, and organics oxidative upgrading. Finally, a concise statement on the current challenges and future opportunities of bifunctional electrocatalysts for both overall and hybrid water splitting is presented in the hope of guiding future endeavors in the quest for energy-efficient and sustainable green hydrogen production.

Reduced graphene Oxide/NiO based nano-composites for the efficient removal of alizarin dye, indigo dye and reduction of nitro aromatic compounds

Removal of alizarin red S (ARS) and Indigo dye from aqueous media and reduction of nitro aromatic compounds are successfully done under mild condition by using reduced Graphene Oxide-Nickel Oxide (rGO-NiO) nanocomposite as catalyst. RGO-NiO is well characterized by different analytical techniques. Morphology, structural, and composition studies done by HRTEM, FESEM, EDX, TGA, FTIR, XPS, Raman spectroscopy, and XRD. RGO-NiO nanocomposite has high stability for the removal of ARS, Indigo dye, reduction reaction nitro aromatic compounds.

Recent Development of Nickel-Based Electrocatalysts for Urea Electrolysis in Alkaline Solution

Recently, urea electrolysis has been regarded as an up-and-coming pathway for the sustainability of hydrogen fuel production according to its far lower theoretical and thermodynamic electrolytic cell potential (0.37 V) compared to water electrolysis (1.23 V) and rectification of urea-rich wastewater pollution. The new era of the "hydrogen energy economy" involving urea electrolysis can efficiently promote the development of a low-carbon future. In recent decades, numerous inexpensive and fruitful nickel-based materials (metallic Ni, Ni-alloys, oxides/hydroxides, chalcogenides, nitrides and phosphides) have been explored as potential energy saving monofunctional and bifunctional electrocatalysts for urea electrolysis in alkaline solution. In this review, we start with a discussion about the basics and fundamentals of urea electrolysis, including the urea oxidation reaction (UOR) and the hydrogen evolution reaction (HER), and then discuss the strategies for designing electrocatalysts for the UOR, HER and both reactions (bifunctional). Next, the catalytic performance, mechanisms and factors including morphology, composition and electrode/electrolyte kinetics for the ameliorated and diminished activity of the various aforementioned nickel-based electrocatalysts for urea electrolysis, including monofunctional (UOR or HER) and bifunctional (UOR and HER) types, are summarized. Lastly, the features of persisting challenges, future prospects and expectations of unravelling the bifunctional electrocatalysts for urea-based energy conversion technologies, including urea electrolysis, urea fuel cells and photoelectrochemical urea splitting, are illuminated.

Cobalt-Iron-Phosphate Hydrogen Evolution Reaction Electrocatalyst for Solar-Driven Alkaline Seawater Electrolyzer

Seawater splitting represents an inexpensive and attractive route for producing hydrogen, which does not require a desalination process. Highly active and durable electrocatalysts are required to sustain seawater splitting. Herein we report the phosphidation-based synthesis of a cobalt–iron–phosphate ((Co,Fe)PO₄) electrocatalyst for hydrogen evolution reaction (HER) toward alkaline seawater splitting. (Co,Fe)PO₄ demonstrates high HER activity and durability in alkaline natural seawater (1 M KOH + seawater), delivering a current density of 10 mA/cm² at an overpotential of 137 mV. Furthermore, the measured potential of the electrocatalyst ((Co,Fe)PO₄) at a constant current density of −100 mA/cm² remains very stable without noticeable degradation for 72 h during the continuous operation in alkaline natural seawater, demonstrating its suitability for seawater applications. Furthermore, an alkaline seawater electrolyzer employing the non-precious-metal catalysts demonstrates better performance (1.625 V at 10 mA/cm²) than one employing precious metal ones (1.653 V at 10 mA/cm²). The non-precious-metal-based alkaline seawater electrolyzer exhibits a high solar-to-hydrogen (STH) efficiency (12.8%) in a commercial silicon solar cell.

Nanostructured β−NiS Catalyst for Enhanced and Stable Electro−oxidation of Urea

Urea oxidation reaction (UOR) has received a high level of recent interest since electrochemical oxidation of urea can remediate harmful nitrogen compounds in wastewater and accomplish hydrogen fuel production simultaneously. Thus, urea is considered to be potential hydrogen energy source that is inherently safe for fuel cell applications. However, the catalytic reaction suffers from slow kinetics due to six electron transfer in UOR. In this work, β phase NiS is successfully prepared through facile hydrothermal reaction, in which diethanolamine (DEA) was added as chelating agent leading to 3D nanoflower morphology. The crystal structure, surface morphology, and chemical bonding of the β−NiS were characterized by X–ray diffraction (XRD), scanning electron microscope (SEM), and X−ray photoelectron spectroscopy (XPS), respectively. The UOR performance of NiS was evaluated by means of linear sweep voltammetry (LSV), Tafel analysis, electrochemical impedance spectroscopy (EIS), chronoamperometry, and chronopotentiometry in 1 M KOH electrolyte containing 0.33 M urea. Compared to the Ni(OH)2 counterpart, NiS exhibits lower onset potential, increased current responses, faster kinetics of urea oxidation, lower charge transfer resistance, and higher urea diffusion coefficient, leading to the enhanced catalytic performance toward UOR. Moreover, the developed NiS catalyst exhibits superior stability and tolerance towards urea electro−oxidation in 10,000 s test.

Calculating the Electrical Conductivity of Graphene Nanoplatelet Polymer Composites by a Monte Carlo Method

Electrical conductivity is one of several outstanding features of graphene–polymer nanocomposites, but calculations of this property require the intricate features of the underlying conduction processes to be accounted for. To this end, a novel Monte Carlo method was developed. We first established a randomly distributed graphene nanoplatelet (GNP) network. Then, based on the tunneling effect, the contact conductance between the GNPs was calculated. Coated surfaces (CSs) were next set up to calculate the current flow from the GNPs to the polymer. Using the equipotential approximation, the potentials of the GNPs and CSs met Kirchhoff’s current law, and, based on Laplace equation, the potential of the CSs was obtained from the potential of the GNP by the walk-on-spheres (WoS) method. As such, the potentials of all GNPs were obtained, and the electrical conductivity of the GNP polymer composites was calculated. The barrier heights, polymer conductivity, diameter and thickness of the GNP determining the electrical conductivity of composites were studied in this model. The calculated conductivity and percolation threshold were shown to agree with experimental data.