Effectiveness of Riboflavin and Rose Bengal Photosensitizer Modified Adhesive Resin for Orthodontic Bonding

Photoactivated riboflavin-doped hydroxy apatite nanospheres infiltered in orthodontic adhesives

To assess micro-tensile bond strength (μTBS), degree of conversion (DC), microleakage (ML) antibacterial efficacy, and adhesive remnant index (ARI) of orthodontic brackets to enamel with different concentrations of photoactivated riboflavin-doped hydroxyapatite (HA) nanospheres (NS) (0%,1%,5% and 10%) and 0.5 wt% RF alone in orthodontic adhesive. Samples were included on the predefined inclusion criteria and positioned up to the cementoenamel junction (CEJ). Hydroxy apatite nanospheres (HANS) commercially bought were doped with RF. Surface characterization of HANS and RF-doped HANS were assessed along with EDX analysis. Samples were grouped based on experimental orthodontic adhesive modification. Group 1: Transbond XT no modification, Group 2: experimental Transbond XT 0.5 wt% RF, Group 3: experimental Transbond XT 0.5 wt% RF-doped 1% HANS, Group 4: experimental Transbond XT 0.5 wt % RF-doped 5% HANS and Group 5: Experimental Transbond XT 0.5 wt% RF-doped 10% HANS. Brackets were placed based on different adhesive modifications and samples underwent thermocycling. Samples were evaluated for μTBS, DC, and ML. The type of failure was assessed using ARI. Adhesive modified and un-modified in four different concentrations (0%, 1%, 5%, and 10%) and 0.5 wt% RF only were used to test efficacy against Streptococcus mutans (S.mutans). The survival rate of S.mutans and ML was determined using the Kruskal-Wallis Test. For the analysis of μTBS, ANOVA was employed, followed by a post-hoc Tukey HSD multiple comparisons test. The highest μTBS and lowest ML were observed in Group 2 experimental Transbond XT 0.5 wt% RF only. The lowest μTBS, highest ML, and lowest DC was seen in Group 5 experimental Transbond XT 0.5 wt% RF-doped 10% HANS. Samples in Group 1 in which Transbond XT was used as adhesive demonstrated significantly the highest microbial count of S.mutans and DC. Photoactivated RF-doped HANS in 1% and 0.5 wt% Riboflavin alone in orthodontic adhesive for metallic bracket bonding improved micro tensile bond strength, ML, DC, and antibacterial scores. RESEARCH HIGHLIGHTS: The highest μTBS and lowest ML were observed in Group 2 experimental Transbond XT 0.5 wt% RF only. The lowest μTBS, highest ML, and lowest DC was seen in Group 5 experimental Transbond XT 0.5 wt% RF-doped 10% HA-NS. Samples in Group 1 in which Transbond XT was used as adhesive demonstrated significantly the highest microbial count of S.mutans and DC.

Assessing the physico-mechanical, anti-bacterial, and anti-demineralization properties of orthodontic resin composite containing different concentrations of photoactivated zinc oxide nanoparticles on Streptococcus mutans biofilm around ceramic and metal orthodontic brackets: An ex vivo study

BACKGROUND AND PURPOSE

The aim of this study was to evaluate the physico-mechanical, anti-bacterial, and anti-demineralization properties of orthodontic resin composite containing photoactivated zinc oxide nanoparticles (ZnONPs) on Streptococcus mutans biofilm around ceramic and metal brackets.

MATERIAL AND METHODS

Following the minimum inhibitory concentration (MIC) determination for ZnONPs, shear bond strength (SBS) was tested for composites containing different concentrations of ZnONPs. The chosen concentration was used to evaluate the microleakage, anti-bacterial, and anti-demineralization properties.

RESULTS

Adding 50μg/mL of ZnONPs to the orthodontic composite did not negatively affect its physico-mechanical properties. ZnONPs (50μg/mL)-mediated aPDT and 0.2% chlorhexidine significantly (P=0.000) reduced S. mutans biofilms compared to the phosphate-buffered saline (PBS) groups (metal/PBS=7.47±0.7×106, and ceramic/PBS=7.47±0.7×106), with the lowest colony count observed in these groups (metal/chlorhexidine=1.06±0.4×105, ceramic/chlorhexidine=1±0.2×105, metal/ZnONPs-mediated aPDT=1.33±0.3×105, and ceramic/ZnONPs-mediated aPDT=1.2±0.3×105). Sodium fluoride varnish and ZnONPs-mediated aPDT showed the highest efficacy in anti-demineralization and significantly improving the enamel surface microhardness compared to the artificial saliva, especially in ceramic bracket groups (524.17±42.78N and 441.00±29.48N, 394.17±46.83N, P=0.000, and P=0.003, respectively).

CONCLUSION

ZnONPs (50μg/mL)-mediated aPDT effectively inhibited S. mutans biofilm and promoted anti-demineralization without adverse effects on the physico-mechanical properties of the composite resin. These results suggest the potential of this method in preventing white spot lesions during orthodontic treatment.

Photoactivated rose bengal-doped TiO2 nanoparticles modified fifth-generation adhesive on the survival rate of Streptococcus mutants and mechanical properties of tooth-colored restorative material to carious dentin

Assessment of the antimicrobial, micro tensile bond strength (μTBS), and degree of conversion (DC) of fifth-generation adhesive modified using photoactivated 0.5% rose bengal (RB) and photoactivated RB-doped titanium dioxide nanoparticles (TiO2NPs) in different concentrations (2% and 5%) as compared with the unmodified adhesive bonded to the carious affected dentin (CAD). Forty mandibular molars with caries progression up to the middle third of the dentin, as per the International Caries Detection and Assessment System (ICDAS) score of 4 and 5 were included. Specimens were divided into four groups based on etch and rinse adhesive (ERA) modification group 1: unmodified ERA, group 2: photoactivated 0.5% RB photosensitizer (PS) modified ERA, group 3: photoactivated RB-doped 2 wt% TiO2NPs adhesive, group 4: photoactivated RB-doped 5 wt% TiO2NPs adhesive. Followed by adhesive and composite restoration on the CAD surface. All the specimens were thermocycled and an assessment of μTBS and failure pattern analysis was performed. The antibacterial potency of RB and RB-doped TiO2NPs (2% and 5%) followed by their activation using visible light against Streptococcus mutans (S.mutans) were tested. The survival rate of S.mutans was assessed using the Kruskal-Wallis test. The analysis of μTBS involved the use of ANOVA, followed by a post-hoc Tukey honestly significant difference (HSD) multiple comparisons test. Group 1 (Unmodified ERA) (0.52 ± 0.31 CFU/mL) treated samples unveiled the highest means of bacterial survival and lowest μTBS (11.32 ± 0.63 MPa). Nevertheless, group 4: photoactivated RB-doped 5 wt% TiO2NPs adhesive displayed the lowest outcomes of S.mutans survival (0.11 ± 0.02 CFU/mL) and highest bond strength (18.76 ± 1.45 MPa). The photoactivated RB-doped 2 wt% TiO2NPs in adhesive demonstrated promising enhancements in both μTBS and antibacterial efficacy against S.mutans. However, it is noteworthy that this modification led to a decrease in the DC of the adhesive. RESEARCH HIGHLIGHTS: Unmodified ERA-treated samples unveiled the highest bacterial survival and the lowest μTBS. Photoactivated RB-doped 5 wt% TiO2NPs adhesive displayed the lowest S.mutans survival rate and highest bond strength. DC decreased with an increase in concentration of TiO2.

Pretreatment of enamel with Riboflavin activated photodynamic therapy and Er, Cr: YSGG laser for bonding of orthodontic bracket with adhesive modified with cerium oxide nanoparticles

AIM

To assess the degree of conversion (DC) and shear bond strength (SBS) of experimental adhesive (EA) infused with and without 1 % Cerium oxide (CeO₂)-NPs on metallic bracket bonded to enamel conditioned with three different pretreatment regimes PDT-activated (Riboflavin) RF, ECY (Er, Cr: YSGG), and Phosphoric acid (PA).

MATERIAL AND METHOD

EA and EA modified with 1 % CeO₂-NPs were prepared. Characterization of CeO2NPs was assessed using a scanning electron microscope (SEM). Seventy-two premolars extracted due to periodontal or orthodontic reasons were disinfected. Samples were mounted and allocated into three groups according to enamel surface treatment before bracket bonding. Samples in Group 1 were pretreated with Traditional 37 % PA-gel; Specimens in Group 2 surface treated with RF-activated PDT, and samples in Group 3 were conditioned using ECY. Brackets were placed on conditioned surfaces and samples were aged and underwent SBS testing using UTM. ARI index was used to assess bond failure. DC was evaluated for both adhesives using FTIR. ANOVA and Tukey post hoc test were used to compare the means and standard deviation (SD) of SBS and DC in different experimental groups.

RESULTS

Enamel conditioned with PA and RF activated by PDT demonstrated comparable bond values with 1 % CeO2 infused in EA and EA (p>0.05).ARI analysis shows that enamel conditioned with PA and RF activated by PDT showed the majority of failure types between 1 and 2 irrespective of the type of adhesive. DC value in EA (73.28±8.37) was the highest and comparable to 1 % CeO2 infused in EA (66.48±6.81) CONCLUSION: RF-activated PDT can be used alternatively to 37 % PA for enamel conditioning when bonding metallic brackets. Infiltration of 1 % CeO2 NPs in EA improves SBS irrespective of the type of enamel conditioning. Infusion of 1 % CeO2 NPs in EA demonstrates no significant difference in DC compared to EA.

Formulation of arginine-loaded mesoporous silica nanoparticles (Arg@MSNs) modified orthodontic adhesive

OBJECTIVES

The objective of this study was to synthesize arginine loaded mesoporous silica nanoparticles (Arg@MSNs), develop a novel orthodontic adhesive using Arg@MSNs as modifiers, and investigate the adhesive performance, antibacterial activity, and biocompatibility.

METHODS

Arg@MSNs were synthesized by immobilizing arginine into MSNs and characterized using transmission electron microscope (TEM), dynamic light scattering (DLS), and Fourier Transform Infrared Spectrometer (FT-IR). Arg@MSNs were incorporated into Transbond XT adhesive with different mass fraction to form functional adhesives. The degree of conversion (DC), arginine release behavior, adhesive performance, antibacterial activity against Streptococcus mutans biofilm, and cytotoxicity were comprehensively evaluated.

RESULTS

TEM, DLS, and FT-IR characterizations confirmed the successful preparation of Arg@MSNs. The incorporation of Arg@MSNs did not significantly affect DC and exhibited clinically acceptable bonding strength. Compared to the commercial control, the Arg@MSNs modified adhesives greatly suppressed the metabolic activity and polysaccharide production while increased the biofilm pH values. The cell counting kit (CCK)-8 test indicated no cytotoxicity.

CONCLUSIONS

The novel orthodontic adhesive containing Arg@MSNs exhibited significantly enhanced antibacterial activities and inhibitory effects on acid production compared to the commercial adhesive without compromising their bonding strength or biocompatibility.

CLINICAL SIGNIFICANCE

The novel orthodontic adhesive containing Arg@MSNs exhibits potential clinical benefits in preventing demineralization of enamel surfaces around or beneath orthodontic brackets due to its enhanced antibacterial activities and acid-producing inhibitory effects.

Application of photosensitive dental materials as a novel antimicrobial option in dentistry: A literature review

The formation of dental plaque is well-known for its role in causing various oral infections, such as tooth decay, inflammation of the dental pulp, gum disease, and infections of the oral mucosa like peri-implantitis and denture stomatitis. These infections primarily affect the local area of the mouth, but if not treated, they can potentially lead to life-threatening conditions. Traditional methods of mechanical and chemical antimicrobial treatment have limitations in fully eliminating microorganisms and preventing the formation of biofilms. Additionally, these methods can contribute to the development of drug-resistant microorganisms and disrupt the natural balance of oral bacteria. Antimicrobial photodynamic therapy (aPDT) is a technique that utilizes low-power lasers with specific wavelengths in combination with a photosensitizing agent called photosensitizer to kill microorganisms. By inducing damage through reactive oxygen species (ROS), aPDT offers a new approach to addressing dental plaque and associated microbial biofilms, aiming to improve oral health outcomes. Recently, photosensitizers have been incorporated into dental materials to create photosensitive dental materials. This article aimed to review the use of photosensitive dental materials for aPDT as an innovative antimicrobial option in dentistry, with the goal of enhancing oral health.

Rose bengal-decorated rice husk-derived silica nanoparticles enhanced singlet oxygen generation for antimicrobial photodynamic inactivation

Rice husks are well known for their high silica content, and the RH-derived silica nanoparticles (RH NPs) are amorphous and biocompatible; therefore, they are suitable raw materials for biomedical applications. In this study, rose bengal-impregnated rice husk nanoparticles (RB-RH NPs) were prepared for their potential photosensitization and ¹O₂ generation as antimicrobial photodynamic inactivation. RB is a halogen-xanthene type's photosensitizer showing high singlet oxygen efficiency, and the superior photophysical properties are desirable for RB in the antimicrobial photodynamic inactivation of bacteria. To enhance the binding of anionic RB to RH NPs, we conducted cationization for the RH NPs using polyethyleneimine (PEI). The control of the RB adsorption state on cationic PEI-modified RH NPs was essential for RB RH-NP photosensitizers to obtain efficient ¹O₂ generation. Minimizing RB aggregation allowed highly efficient ¹O₂ production from RB-RH NPs at the molar ratio of RB with the PEI, X_RB/PEI. = 0.1. The RB-RH NPs have significant antimicrobial activity against Streptococcus mutans compared to free RB after white light irradiation. The RB-RH NP-based antimicrobial photodynamic inactivation can be employed effectively in treating Streptococcus mutans for dental applications.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10853-023-08194-z.

The antimicrobial, physical, and chemical properties of a riboflavin-loaded dental resin intended for antimicrobial photodynamic therapy

BACKGROUND

Dental caries remain a significant global health challenge. Unfortunately, current dental materials lack sufficient antimicrobial power to address the pathogenic species involved in this disease. In this study the potential to load a dental resin blend (RB) with riboflavin (B2) for use in an antimicrobial photodynamic therapy (aPDT) approach was investigated.

METHODS

B2 was added to our experimental RB (0.1 - 10 wt%). Upon investigating the degree of conversion and specimen integrity of the RB as a function of B2 concentration, it was determined that loading should be restricted to 0.1, 1.0, and 1.5 wt%. Subsequent investigation included water sorption (WS) and solubility (SL), as well as shear bond strength (SBS) and flexural strength (FS) of the specimens after 24 h and 28-day water storage. Lastly, the antimicrobial response of Streptococcus mutans (S. mutans) biofilm following 6 h growth and 60 s of blue LED light (1.3 J/cm²) in an aPDT-based approach was measured.

RESULTS AND CONCLUSIONS

Adding up to 1.5 wt% B2 had minimal impact on the FS or SBS of the RB. However, aging for 28-days notably increased the FS by as much as 50% for the 1.5 wt% B2-loaded RB. In addition, adding 1.5 wt% B2 resulted in a significant reduction in WS/SL of the RB. Lastly, while adding B2 did not change the antimicrobial response, this was an initial study under these conditions and future investigation will seek to optimize light parameters to produce a more agonistic response. Overall, a riboflavin-loaded dental resin shows significant promise for utilization in restorative dentistry with aPDT.

Disinfection of caries-affected dentin using potassium titanyl phosphate laser, Rose bengal and Ozonated water on shear bond strength of deciduous teeth

AIM

To assess the efficacy of disinfection of caries-effected dentin (CAD) using KTP laser and different decontamination methods using ozonated water (OW), Rose Bengal photosensitizer (RBP), chlorhexidine (CHX), and Er, YAG laser on the shear bond strength (SBS) of adhesive resin bonded to deciduous teeth.

MATERIAL AND METHODS

A total of 50 extracted and radiographically verified carious primary molars were collected and scrutinized according to ICDAS criteria. Specimens were allocated randomly into five groups (n = 10) as per the type of CAD disinfectants. KTP laser, OW, RBP, CHX (control), and Er, YAG laser. After cavity sanitization, a resin adhesive (prime and bond NT) was smeared on the dentinal exterior followed by incremental composite filling. SBS evaluation was performed by employing specimens in the universal testing machine. The debonded surface was assessed under 40x magnification in a stereomicroscope to ascertain fracture mode. Statistical analysis was done by using the ANOVA and the Post Hoc Tukey multiple comparison tests (p < 0.05).

RESULTS

The highest SBS was exhibited by group 2 i.e., when OW was employed for CAD disinfection (10.25 ± 0.24 MPa). Whereas, the lowest SBS bond value was unveiled by samples in group 3 when RBP was applied for dentin surface sanitization (7.85 ± 0.59 MPa).CAD disinfection with KTP laser (8.25 ± 0.41 MPa), CHX (8.19 ± 0.73 MPa), and RBP displayed comparable bond values (p > 0.05).

CONCLUSION

Ozonated water and Er, YAG laser could be employed as cavity disinfectants in primary teeth as they demonstrated better shear bond strength without jeopardizing the adhesive binding capacity of restorative resins bonded to caries-affected dentin.

Efficacy of Er, Cr: YSGG laser phosphoric acid gel and Riboflavin activated by Photodynamic therapy on enamel reconditioning rebonded to metallic brackets: An Invitro study

AIM

To evaluate the shear bond strength (SBS) and failure percentage of rebonded metallic brackets after employing various enamel-reconditioning methods (37% phosphoric acid, sandblasting, Er, Cr: YSGG laser, and Riboflavin (RF).

MATERIAL AND METHODS

After sample size calculation, a sum of 40 non-carious, non-traumatically extracted and sound human premolar teeth were collected and the enamel surface was prepped by etching, washing, and drying. The enamel surface was primed with a bonding agent and light cured, later brackets were bonded via composite. After bonding, bracket debonding was begun using a Weingart plier and the enamel surface was reconditioned before rebonding. Samples were divided into four (n=10) reconditioning groups at random and subjected to SB with 90-μm alumina particles group 1, Er, Cr: YSGG laser group 2, 37% PA (control) group 3, and RF group 4 respectively. After reconditioning, brackets were rebonded to the enamel surface via an adhesive system and composite. Later, samples were exposed to the universal testing machine for SBS analysis, and bond failure analysis was performed by using an adhesive remnant index (ARI). Statistical analysis was executed by one-way ANOVA and Post Hoc Tukey multiple comparison tests at a statistically significant level of p ˂ 0.05.

RESULTS

The SBS analysis showed that the highest SBS of rebounded brackets was exhibited by 37% phosphoric acid (control) and the lowest SBS by sandblasting enamel surface with 90-μm alumina particles for enamel prior rebonding. However, Er, Cr: YSGG laser and RF activated by PDT validated comparable SBS results to control (p>0.05). Contrarily, sandblasting with 90-μm alumina particles showed a statistically significant difference from other analyzed reconditioning groups (p<0.05). Deliberating failure rate analysis by ARI index, the most eminent failures predicted among groups were scored between 0 and 1 except for sandblasting which majorly resulted in a score of 2 showing cohesive type failure.

CONCLUSION

Chromium-doped erbium, yttrium-scandium-gallium-garnet (Er, Cr: YSGG) laser, and Riboflavin activated by photodynamic therapy have the potential to be used as an alternative to 37% phosphoric acid for enamel surface reconditioning before the rebonding metallic bracket.

Impact of curcumin loading on the physicochemical, mechanical and antimicrobial properties of a methacrylate-based experimental dental resin

Oral biofilms are directly linked to one of the most common chronic human diseases, dental caries. Resin-based dental materials have significant potential to replace amalgam, however they lack sufficient antimicrobial power. This innovative study investigates a curcumin-loaded dental resin which can be utilized in an antimicrobial photodynamic therapy (aPDT) approach. The study evaluated the effects of curcumin loading on resin physicochemical, mechanical, and adhesive properties, as well as the antimicrobial response associated with blue light activation. Preliminary tests involving degree of conversion (DC) and sample integrity determined the optimal loading of curcumin to be restricted to 0.05 and 0.10 wt%. These optimal loadings were tested for flexural strength (FS), water sorption (WS) and solubility (SL), shear bond strength to dentin (SBS), and viability of Streptococcus mutans under 14.6 J/cm² blue light or dark conditions, in 6 h and 24 h biofilms. The results demonstrated that 0.10 wt% curcumin had minimal impact on either FS or SBS, but detectably increased WS and SL. A 2 log₁₀ (CFU/mL) reduction in S. mutans after light application in both 6 h and 24 h biofilms were corroborated by CLSM imaging and highlighted the significant potential of this novel aPDT approach with resin-based dental materials.

Smart contact lens containing hyaluronate-rose bengal conjugate for biophotonic myopia vision correction

As the collagen layer weakens with increasing age or certain diseases such as keratoconus and myopia, the mechanical property of the collagen layer decreases with corneal deformation. To circumvent these problems, the corneal collagen has been crosslinked with the photosensitizer riboflavin under UV light after de-epithelialization. However, this treatment with riboflavin and UV light can cause notable damage to the eye. Here, the biocompatible rose bengal (RB) dye was conjugated to hyaluronic acid (HA) to enhance the corneal permeability, which can be activated by safe green light with a wavelength of 530 nm. Two-photon microscopy revealed the deep tissue penetration of the HA-RB conjugate in comparison with RB. Collagen fibrillogenesis, ex vivo tensile test, and ex vivo histological analysis confirmed the effective collagen crosslinking by HA-RB conjugate and the light irradiation. Furthermore, we developed a smart contact lens for on-demand HA-RB conjugate delivery from the reservoir embedded in the contact lens. Taken together, we could envision the feasibility of a smart contact lens for biophotonic myopia vision correction.

The Potential Application of Natural Photosensitizers Used in Antimicrobial Photodynamic Therapy against Oral Infections

Oral health problems and the emergence of antimicrobial resistance among pathogenic bacterial strains have become major global challenges and are essential elements that negatively affect general well-being. Antimicrobial photodynamic therapy (APDT) is based on a light source and oxygen that activates a nontoxic photosensitizer, resulting in microbial destruction. Synthetic and natural products can be used to help the APDT against oral microorganisms. The undesirable consequences of conventional photosensitizers, including toxicity, and cost encourage researchers to explore new promising photosensitizers based on natural compounds such as curcumin, chlorella, chlorophyllin, phycocyanin, 5-aminolevulinic acid, and riboflavin. In this review, we summarize in vitro studies describing the potential use of APDT therapy conjugated with some natural products against selected microorganisms that are considered to be responsible for oral infections.

A novel, dual action chimera comprising DNA methylating agent and near-IR xanthene-cyanine photosensitizer for combined anticancer therapy

A facile synthesis, biological evaluation and photodynamic properties of novel activatable anticancer molecular hybrids (chimeras) Ch and I-Ch are described. The chimeras consist of DNA methylating methyl triazene moiety and fluorogenic xanthene-cyanine (XCy) or iodinated xanthene-cyanine (I-XCy) photosensitizer. These two anticancer core structures are bound by means of a self-immolative 4-aminobenzyl alcohol linker. The hydrolytic cleavage of the carbamate protecting group promotes activation of both DNA methylating monomethyl triazene and phototoxic xanthene-cyanine dye providing, in addition, a near-IR emission signal for detection of the drug activation events. Preliminary antiproliferative assay demonstrates that the developed chimeras exhibit higher antitumor activity in the breast cancer cell line upon near-IR light irradiation compared to their structural constituents, xanthene-cyanine photosensitizer and monomethyl triazene substance.

Exploring the use of a Ruthenium complex incorporated into a methacrylate-based dental material for antimicrobial photodynamic therapy

OBJECTIVES

To evaluate the effects of a blue light photosensitizer (PS), Ruthenium II complex (Ru), on the chemical, physical, mechanical, and antimicrobial properties of experimental dental resin blends.

METHODS

The experimental resin (BisEMA, TEEGDMA, HPMA, ethanol, and photoinitiator) was loaded with Ru at 0.00%, 0.07%, 0.14%, 0.28%, 0.56%, 1.12%, 1.2%, 1.5%, 2%, 3%, 4%, 5%, 6%, 7%, 8%, 9%, or 10% w/w. Samples were evaluated for the degree of conversion (DC) after 30 and 60 s curing-time (n = 6). Selected formulations (0.00%, 0.28%, 0.56%, 1.12%) were further tested for shear bond strength (SBS) (n = 15); flexural strength (FS) (n = 12); and antimicrobial properties (CFUs), in dark and light conditions. These latter tests were performed on specimens stored for 24-h or 2-month in 37°C water. Water sorption (WS) and solubility (SL) tests were also performed (n = 12). Data were analyzed either by a one- or two-factor general linear model (α = 0.05).

RESULTS

Overall, Ru concentration above 1.2% resulted in reduced DC. In SBS results, only the 1.12%Ru resin blend samples had statistically lower values compared to the 0.00%Ru resin blend at 24-h storage (p = 0.004). In addition, no differences in SBS were detected among the experimental groups after 2-month storage in water. Meanwhile, FS increased for all experimental groups under similar aging conditions (p < 0.001). Antimicrobial properties were improved upon inclusion of Ru and application of light (p < 0.001 for both) at 24-h and 2-month storage. Lastly, no detectable changes in WS or SL were observed for the Ru-added resins compared to the 0.00%Ru resin blend. However, the 0.28% Ru blend presented significantly higher WS compared to the 0.56% Ru blend (p = 0.007).

CONCLUSIONS

Stable SBS, improved FS, and sustained antimicrobial properties after aging gives significant credence to our approach of adding the Ruthenium II complex into dental adhesive resin blends intended for an aPDT approach.

Enhanced reduction of polymicrobial biofilms on the orthodontic brackets and enamel surface remineralization using zeolite-zinc oxide nanoparticles-based antimicrobial photodynamic therapy

The aim of this study was to evaluate the anti-biofilm and anti-metabolic activities of zeolite-zinc oxide nanoparticles (Zeo/ZnONPs)-based antimicrobial photodynamic therapy (aPDT) against pre-formed polymicrobial biofilms on the orthodontic brackets, as well as, assess the remineralization efficacy on polymicrobial biofilms induced enamel lesions. Following synthesis and characterization of Zeo/ZnONPs, cell cytotoxicity, hemolytic effect, and intracellular reactive oxygen species (ROS) production were determined. The anti-biofilm and anti-metabolic activities of aPDT using different concentrations of Zeo/ZnONPs were investigated. Microhardness tester and DIAGNOdent Pen were used to evaluate the changes of remineralization degree on the treated enamel slabs duration 1 and 3 months. No significant cytotoxicity and erythrocyte hemolysis were observed in treated cells with Zeo/ZnONPs. When irradiated, suggesting that the Zeo/ZnONPs were photoactivated, generating ROS and leading to reduce dose-dependently the cell viability and metabolic activity of polymicrobial biofilms. Also, the enamel surface microhardness value of exposed enamel showed a steady increase with the concentration of Zeo/ZnONPs. No statistically significant differences were shown between aPDT and sodium fluoride varnish as the control group. Overall, Zeo/ZnONPs-based aPDT with the greatest remineralization efficacy of enamel surface can be used as an anti-biofilm therapeutic method, which is involved with their potent ability to produce ROS.

Photodynamic Therapy in Orthodontics: A Literature Review

Treatment of malocclusions using fixed orthodontic appliances makes it difficult for patients to perform hygiene procedures. Insufficient removal of bacterial biofilm can cause enamel demineralization, manifesting by visible white spot lesions or periodontal diseases, such as gingivitis periodontitis or gingival hyperplasia. The classic methods of preventing the above problems include, in addition to proper hygiene, ultrasonic scaling, periodontal debridement, and oral rinses based on chlorhexidine. New alternative methods of reducing plaque around brackets are being developed. There is a growing interest among researchers in the possibility of using photodynamic therapy in orthodontics. A literature search for articles corresponding to the topic of this review was performed using the PubMed and Scopus databases and the following keywords: ‘photodynamic therapy’, ‘orthodontics’, and ‘photosensitizer(s)’. Based on the literature review, two main directions of research can be distinguished: clinical research on the use of photodynamic therapy in the prevention of white spot lesions and periodontal diseases, and ex vivo research using a modified orthodontic adhesive by adding photosensitizers to them. Methylene blue is the most frequently used photosensitizer in clinical trials. The effectiveness of antimicrobial photodynamic therapy is mainly compared to the ultrasonic scaler as a single therapy or as an adjunct to the ultrasonic scaler. In their conclusions, the researchers most often emphasize the effectiveness of antimicrobial photodynamic therapy in reducing microbial levels in patients treated with fixed appliances and the possibility of using it as an alternative to routine procedures aimed at maintaining a healthy periodontium. The authors suggest further research on the use of photodynamic therapy to prove the validity of this method in orthodontics. It should also not be forgotten that proper hygiene is the basis for maintaining oral cavity health, and its neglect is a contraindication to orthodontic treatment.