Effective Therapeutic Delivery and Bioavailability Enhancement of Pioglitazone Using Drug in Adhesive Transdermal Patch

Improvement of Bioavailability of Sildenafil Citrate Through Taste Masked Orodispersible Film for Pulmonary Hypertension Management

The oral bioavailability of sildenafil citrate is approximately 43%, primarily limited by the low aqueous solubility and first-pass effect. Considering the drug properties and biopharmaceutical considerations, this study aimed to develop an immediate release, taste masked orodispersible film (ODF) of sildenafil citrate for the efficient management of pulmonary arterial hypertension (PAH). The optimization was done by applying 32 full-factorial design. The drug-loaded film was prepared and evaluated for the physical and mechanical parameters like; thickness, disintegration time, tensile strength, elongation, swelling index, content uniformity, disintegration and in vitro drug release in pH 6.2 stimulated salivary fluid. The FTIR and DSC data proved excellent compatibility between the drug and polymers used. The time taken for disintegration by the optimized film was about 62.66 s, while the drug release was observed ~ 96% in 10 min. Pharmacokinetic studies exhibited better sildenafil plasma level (p < 0.05) and Cmax (p < 0.001) of orally disintegrating film which is significantly higher than the oral drug solution. The AUC0-8 (24874.425 ± 1234.45 ng. h/mL) in the oromucosal application was 1.2-fold more (p < 0.0001) than the control. The presence of sweetening and flavoring agents in the formulation masked the drug bitterness, resulting in a higher intake of the formulation in rats compared to the unmasked drug solution, as observed with in vivo taste masking studies. The importance of ODF as a feasible, effective, and optimal approach for delivering sildenafil citrate via oromucosal administration for the treatment of PAH was successfully highlighted by these results.

Effect of transdermal drug delivery patches on the stratum corneum: in vivo inspection with a handheld terahertz probe

Transdermal drug delivery patches are a good alternative to hypodermic drug injection. The drug delivery efficiency depends strongly on the hydration of the skin under treatment, and therefore, it is essential to study the effects on the skin induced by the application of these medical-grade patches. Terahertz (THz) spectroscopy shows great promise for non-invasive skin evaluation due to its high sensitivity to subtle changes in water content, low power and non-ionizing properties. In this work, we study the effects of transdermal drug delivery patches (three fully occlusive and three partially occlusive) applied on the upper arms of ten volunteers for a maximum period of 28 h. Three different levels of propylene glycol (0 %, 3 % and 6 %) are added to the patches as excipient. By performing multilayer analysis, we successfully retrieve the water content of the stratum corneum (SC) which is the outermost layer of skin, as well as its thickness at different times before and after applying the patches. This study demonstrates the potential of using THz sensing for non invasive skin monitoring and has wide applications for skin evaluation as well as the development of skin products.

Formulation Development and Molecular Mechanism Characterization of Long-Acting Patches of Asenapine for Efficient Delivery by Combining API-ILs Strategy and Controlled-Release Polymers

The objective of our study, which combined API-ILs strategy and controlled-release polymers, was to prepare a 72 h long-acting drug-in-adhesive patch for optimum delivery of asenapine (ASE). Special attention was paid to the permeation promotion mechanism and the controlled release behavior of ASE-ILs in pressure sensitive adhesives (PSA). Formulation factors were investigated by ex vivo transdermal experiments. The optimized patch was evaluated by pharmacokinetics study and skin irritation test. The obtained formulation was as follows, 15% w/w ASE-MA (about 1136 μg/cm2 ASE, 413 μg/cm2 MA), AACONH2 (Amide adhesive) as the matrix, 80 μm thickness, backing film of CoTran™ 9733. The optimized patch displayed satisfactory ex vivo and in vivo performance with Q 72 h of 620 ± 44 µg/cm2 and Fabs of 62.4%, which utilization rate (54.6%) was significantly higher than the control group (38.3%). By using the classical shake flask method, 13C NMR, DSC, and FTIR, the physicochemical properties and structure of ILs were characterized. log Do/w, ATR-FTIR, Raman, and molecular dynamics simulation results confirmed that ASE-MA (MA: 3-Methoxypropionic acid) had appropriate lipophilicity, and affected lipid fluidity as well as the conformation of keratin to improve the skin permeation. The FTIR, MDSC, rheology, and molecular docking results revealed that hydrogen bond (H-bond), were formed between ASE-MA and PSA, and the drug increased the molecular mobility of polymer chains. In summary, the 72 h long-acting patch of ASE was successfully prepared and it supplied a reference for the design of long-acting patches with ASE.

Design, Development, and Evaluation of Treprostinil Embedded Adhesive Transdermal Patch

Clinical application of treprostinil in pulmonary arterial hypertension is hampered by adverse effects caused by its high dosing frequency. The objective of this investigation was to Formulate an adhesive-type transdermal patch of treprostinil and evaluate it both in vitro and in vivo. A 3²-factorial design was utilized to optimize the selected independent variables (X₁: drug amount, X₂: enhancer concentration) on the response variables (Y₁: drug release, Y₂: transdermal flux). The optimized patch was evaluated for various pharmaceutical properties, skin irritation, and pharmacokinetics in rats. Optimization results signify considerable influence (p < 0.0001) of X₁ on both Y₁ and Y₂, as compared to X₂. The optimized patch possesses higher drug content (>95%), suitable surface morphology, and an absence of drug crystallization. FTIR analysis revealed compatibility of the drug with excipients, whereas DSC thermograms indicate that the drug exists as amorphous in the patch. The adhesive properties of the prepared patch confirm adequate adhesion and painless removal, while the skin irritation study confirms its safety. A steady drug release via Fickian diffusion and greater transdermal delivery (~23.26 µg/cm²/h) substantiate the potential of the optimized patch. Transdermal therapy resulted in higher treprostinil absorption (p < 0.0001) and relative bioavailability (237%) when compared to oral administration. Overall, the results indicate that the developed drug in the adhesive patch can effectively deliver treprostinil through the skin and could be a promising treatment option for pulmonary arterial hypertension.

Qbd-Based Approach to Optimize Niosomal Gel of Levosulpiride for Transdermal Drug Delivery

Poor aqueous solubility besides extensive hepatic first effect significantly decreases the oral absorption of levosulpiride, which in turn minimizes its therapeutic effectiveness. Niosomes have been extensively investigated as a transdermal vesicular nanocarrier to increase the delivery of low permeable compounds into and across the skin. This research work was to design, develop and optimize levosulpiride-loaded niosomal gel and to evaluate its prospects for transdermal delivery. The Box-Behnken design was used to optimize niosomes by analyzing the impact of three factors (cholesterol; X1, Span 40; X2, and sonication time; X3) on the responses (particle size, Y1, and entrapment efficiency, Y2). Optimized formulation (NC) was incorporated into gel and evaluated for pharmaceutical properties, drug release study, ex vivo permeation, and in vivo absorption. The design experiment data suggest that all three independent variables influence both response variables significantly (p < 0.01). Pharmaceutical characteristics of NC vesicles showed the absence of drug excipient interaction, nanosize (~102.2 nm), narrow distribution (~0.218), adequate zeta potential (−49.9 mV), and spherical shape, which are suitable for transdermal therapy. The levosulpiride release rates varied significantly (p < 0.01) between niosomal gel formulation and control. Greater flux (p < 0.01) was observed with levosulpiride-loaded niosomal gel than with control gel formulation. Indeed, the drug plasma profile of niosomal gel was significantly higher (p < 0.005), with ~3 folds higher Cmax and greater bioavailability (~500% higher; p < 0.0001) than its counterpart. Overall, these findings imply that the use of an optimized niosomal gel formulation can increase the therapeutic efficacy of levosulpiride and may represent a promising alternative to conventional therapy.

Quantitative evaluation of transdermal drug delivery patches on human skin with in vivo THz-TDS

Transdermal drug delivery (TDD) has been widely used in medical treatments due to various advantages, including delivering drugs at a consistent rate. However, variations in skin hydration can have a significant effect on the permeability of chemicals. Therefore, it is essential to study the changes in skin hydration induced by TDD patches for better control of the delivery rate. In this work, in vivo terahertz (THz) spectroscopy is conducted to quantitatively monitor human skin after the application of patches with different backing materials and propylene glycol concentrations. Changes in skin hydration and skin response to occlusion induced by other patches are investigated and compared. Our work demonstrates the potential application of in vivo THz measurements in label-free, non-invasive evaluation of transdermal patches on human skin and further reveals the mechanism behind the effect.

Pharmaceutical Methods for Enhancing the Dissolution of Poorly Water-Soluble Drugs

Low water solubility is the main hindrance in the growth of pharmaceutical industry. Approximately 90% of newer molecules under investigation for drugs and 40% of novel drugs have been reported to have low water solubility. The key and thought-provoking task for the formulation scientists is the development of novel techniques to overcome the solubility-related issues of these drugs. The main intention of present review is to depict the conventional and novel strategies to overcome the solubility-related problems of Biopharmaceutical Classification System Class-II drugs. More than 100 articles published in the last 5 years were reviewed to have a look at the strategies used for solubility enhancement. pH modification, salt forms, amorphous forms, surfactant solubilization, cosolvency, solid dispersions, inclusion complexation, polymeric micelles, crystals, size reduction, nanonization, proliposomes, liposomes, solid lipid nanoparticles, microemulsions, and self-emulsifying drug delivery systems are the various techniques to yield better bioavailability of poorly soluble drugs. The selection of solubility enhancement technique is based on the dosage form and physiochemical characteristics of drug molecules.

Pioglitazone, a Peroxisome Proliferator-Activated Receptor-γ Agonist, Downregulates the Inflammatory Response in Cutaneous Leishmaniasis Patients Without Interfering in Leishmania braziliensis Killing by Monocytes

Patients with cutaneous leishmaniasis (CL) due to Leishmania braziliensis infection have an exacerbated inflammatory response associated with tissue damage and ulcer development. An increase in the rate of patients who fail therapy with pentavalent antimony has been documented. An adjuvant therapy with an anti-inflammatory drug with the potential of Leishmania killing would benefit CL patients. The aim of the present study was to investigate the contribution of peroxisome proliferator-activated receptor-γ (PPAR-γ) activation by pioglitazone in the regulation of the inflammatory response and L. braziliensis killing by monocytes. Pioglitazone is an oral drug used in the treatment of diabetes, and its main mechanism of action is through the activation of PPAR-γ, which is expressed in many cell types of the immune response. We found that activation of PPAR-γ by pioglitazone decreases the inflammatory response in CL patients without affecting L. braziliensis killing by monocytes. Our data suggest that pioglitazone may serve as an adjunctive treatment for CL caused by L. braziliensis.

Design of a Long-Acting Rivastigmine Transdermal Delivery System: Based on Computational Simulation

The purpose of our study was using a computational simulation to develop a long-acting patch of rivastigmine (RVS). A range of patch formulations were screened including pressure sensitive adhesive (PSA), pharmaceutical excipients, and controlled release membranes using transfer simulation based on a mathematical model. Diffusion dynamics parameters for simulated operations were acquired through in vitro release tests (IVRT) and in vitro skin permeation tests (IVPT). The mechanism of controlled release was studied by FTIR (Fourier transform infrared), DSC (differential scanning calorimeter) and molecular docking. Results of a rat in vitro permeation profile showed excellent correlation with the in vivo deconvolution profile (R²=0.998). Experiments testified to transfer of RVS at a relatively uniform speed with high skin permeation (2531.2±142.46 μg/cm²) in 72 h. Pharmacokinetic data obtained in vivo also confirmed stable plasma concentrations over 72 h for the optimized patch, and significant prolongation of both T_max (11.20±1.79 h) and MRT_0-t (33.91±5.33 h). C_max was controlled with AUC_0-t (267.34±24.46 h ng/ml), which was closely comparable to parameters of a commercial Exelon® Patch. The successful development of a long-acting patch of RVS thus underscores the potential of computer aided design in a context of promnesic transdermal delivery. Graphical abstract.

Preparation and Evaluation of Polyvinylpyrrolidone Electrospun Nanofiber Patches of Pioglitazone for the Treatment of Atopic Dermatitis

Nanofibers have many promising biomedical applications. They can be used for designing transdermal and dermal drug delivery systems. This project aimed to prepare and characterize polyvinylpyrrolidone-based nanofibers as a dermal and transdermal drug delivery system using pioglitazone. Pioglitazone is an oral antidiabetic drug. In addition, it can act as an inflammatory process modulator, making it a good candidate for managing different skin inflammatory conditions such as atopic dermatitis, skin ulcers, and diabetic foot wound healing. Several nanofiber formulations were prepared using the electrospinning method at different drug loadings, polyvinylpyrrolidone concentrations, and flow rates. A cast film with the exact composition of selected nanofiber formulations was prepared as a control. Nanofibers were characterized using a scanning electron microscope to calculate the diameter. Fourier-transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and powder X-ray diffraction were performed for physical and biochemical characterizations. In vitro release, drug loading efficiency, and swelling studies were performed. Ex vivo permeation studies were performed using Franz diffusion cells with or without applying a solid microneedle roller. Round uniform nanofibers with a smooth surface were obtained. The diameter of nanofibers was affected by the drug loading and polymer concentration. Fourier-transform infrared spectra showed a potential physical interaction between the drug and the polymer. According to X-ray diffraction, pioglitazone existed in an amorphous form in prepared nanofibers, with partial crystallinity in the casted film. Nanofibers showed a higher swelling rate compared to the casted film. The drug dissolution rate for nanofibers was 2.3-folds higher than the casted films. The polymer concentration affected the drug dissolution rate for nanofibers; however, drug loading and flow rate did not affect the drug dissolution rate for nanofibers. The application of solid microneedles slightly enhances the total amount of drug permeation. However, it did not affect the flux of the drug through the separated epidermis layer for pioglitazone. The drug permeation flux in nanofibers was approximately five times higher than the flux of the casted film. It was observed that pioglitazone is highly retained in skin layers. Graphical abstract.

Effect of plasticizers on drug-in-adhesive patches containing 5-fluorouracil

Topical patches containing 5-fluorouracil (5-FU) are a feasible alternative to overcome the shortcomings of commercial cream for the treatment of non-melanoma skin cancer (NMSC). Plasticizers are a critical component of drug-in-adhesive (DIA) patches as they can significantly affect the mechanical, adhesive and drug release characteristics of the patches. Eudragit® E (EuE) is a methacrylate-based cationic copolymer capable of producing flexible and adhesive films for topical application. In this study, the effect of plasticizers on the mechanical, adhesive and 5-FU release characteristics of EuE-based patches was comprehensively evaluated. While the elongation at break (%) and adhesion of the films were significantly increased with increasing triacetin, dibutyl sebacate (DBS) and triethyl citrate (TEC) concentrations, the tensile strength showed an inverse relationship. EuE plasticized with 40% triacetin, 30% DBS or 40% w/w TEC produced elastic and adhesive films most suitable for topical application. In vitro release studies of the 5-FU-loaded patches demonstrated an initial burst release pattern during the first 10 min followed by a slow release over 120 min. In summary, this study provides important information on effect of plasticizers for preparation of EuE-based patches with desired mechanical, adhesive and release characteristics of 5-FU towards their potential application in the treatment of NMSC.

Besifloxacin-loaded ocular nanoemulsions: design, formulation and efficacy evaluation

The purpose of this study was to develop and evaluate nanoemulsions (NEs) containing besifloxacin for ocular drug delivery. Pseudo ternary phase diagrams were constructed using Triacetin (oil), Cremophor® RH 40 (surfactant), and Transcutol®P (co-surfactant) to identify NE regions. Six formulations were developed by low-energy emulsification method and then evaluated for size, refractive index, pH, osmolality, viscosity, and drug release. After accelerated physical stability and bovine conrneal permeation studies, NE2 was chosen as optimized formulation forantimicrobial efficacy, and hen's egg test-chorioallantoic membrane (HET-CAM) tests. The particle size of optimum NE was 14 nm with a narrow size distribution. Moreover, other physicochemical characterizations were in the acceptable range for ocular administration. Besifloxacin-loaded NEs demonstrated sustained release pattern and 1.7-fold higher permeation compared with the control suspension in the ex vivo transcorneal permeation study. HET-CAM test indicated no irritation, and HL% revealed no damage to the tissue, so the optimum NE is well tolerated by the eye. In vitro antimicrobial evaluation, showed comparative efficacy of lower drug-loaded NE (0.2%) versus 0.6% besifloxacin suspension (equal concentration to commercial besifloxacin eye drop). In conclusion, besifloxacin-loaded NEs could be considered as a suitable alternative to the marketed suspension for treating bacterial eyeinfections.

Development and Optimization of Asenapine Sublingual Film Using QbD Approach

Asenapine, an atypical antipsychotic agent, has been approved for the acute and maintenance treatment of schizophrenia and manic episodes of bipolar disorder. However, the extensive hepatic metabolism limits its oral bioavailability. Therefore, the objective of the current investigation was to develop sublingual film containing asenapine to enhance the therapeutic efficacy. Sublingual films containing asenapine were fabricated using polyethylene oxide and hydroxypropyl methylcellulose by solvent casting method. Design of experiment was used as a statistical tool to optimize the proportion of the film-forming polymers in order to establish the critical quality attributes of the drug formulation. The process was studied in detail by assessing risk of each step as well as parameters and material attributes to reduce the risk to a minimum. A control strategy was defined to ensure manufacture of films according to the target product profile by evaluation of intermediate quality attributes at the end of each process step. Results of optimized formulations showed rapid disintegration, adequate folding endurance, good percentage elongation, tensile strength, and viscosity. Besides, the results from the in vitro dissolution/ex vivo permeation studies showed rapid dissolution (100% in 6 min) and higher asenapine permeation (~ 80% in 90 min) through the sublingual epithelium. In vivo study indicates greater asenapine absorption (31.18 ± 5.01% of administered dose) within 5 min and was comparable with marketed formulation. In summary, the designing plan to develop asenapine formulation was successfully achieved with desired characteristics of the delivery tool for sublingual administration.

Development of gliclazide ionic liquid and the transdermal patches: An effective and noninvasive sustained release formulation to achieve hypoglycemic effects

Ionic liquids (IL) technology provides a useful platform to achieve the topical delivery of therapeutic agents, because of its capability to improve skin permeability. While the majority of the researches aimed to achieve local action by topical IL delivery, systemic action of therapeutic agents by local topical application has rarely been reported. In the present work, Gliclazide (GLI), a second-generation sulfonylurea drug was transformed into an IL with tributyl(tetradecyl)phosphonium for the first time. The physicochemical properties of this IL were systematically characterized by DSC, TGA, FT-IR, NMR, and HPLC. The transdermal patch based on this IL was further prepared using DURO-TAK®87-4098. The fabricated gliclazide based ionic liquid [P_6,6,6,14][GLI] transdermal patch displayed satisfactory in vitro and in vivo performance. The [P_6,6,6,14][GLI] patch released 88.17% of the loaded drug within a 3-day period in the in vitro dissolution test, confirming its sustained release property. Meanwhile, GLI effectively permeated through the artificial skin from [P_6,6,6,14][GLI] transdermal patch in the in vitro skin permeation test, with the permeation rate and lag time of 16.571 ± 0.328 μg/cm²/h and 3.027 ± 0.154 h respectively. The [P_6,6,6,14][GLI] transdermal patch showed favorable PK profile in rat as compared with GLI oral suspension. The relative bioavailability of GLI reached 92.06% of GLI oral suspension, while the C_max was significantly reduced. Most importantly, [P_6,6,6,14][GLI] transdermal patch demonstrated superior hypoglycemic effect to the oral suspension both in the fasted and fed condition, confirming the feasibility of systemic action by local topical delivery of IL. In addition, the [P_6,6,6,14][GLI] transdermal patch caused no skin irritation based on histopathological analysis.

High Blood Lead Levels: An Increased Risk for Development of Brain Hyperintensities among Type 2 Diabetes Mellitus Patients

The current study was aimed to ascertain the effect of blood lead level on brain tissues in patients with type 2 diabetes. A total of 300 human participants ages 27 to 60 years with type 2 diabetes (n = 150) and healthy individuals (n = 150) were included in this study. The serum samples were used for measuring HbA1c and fasting blood glucose. Blood lead level was measured using flame atomic absorption spectrophotometer. Magnetic resonance imaging sub-analysis was used to assess the brain hyperintensities. Brain hyperintensities were found in 55% of patients with diabetes and 6% of non-diabetic control group subjects. The deep white matter hyperintensities were observed in 45% of diabetic patients, while the subcortical hyperintensities were noted in 10% of cases. Entorhinal cortex changes (31%) and hippocampus changes (42%) were noted in diabetic patients with brain hyperintensities. Diabetic patients with brain hyperintensities showed higher blood lead levels, HbA1c, and fasting blood sugar (p < 0.0001) as compared with healthy volunteers. A higher correlation (R² = 0.8922) was found between deep white matter hyperintensities' size and blood lead levels. In nutshell, persistence of high blood lead level in diabetic patients may progress to brain hyperintensities which may consequently lead to cognitive, behavioral changes and Alzheimer's disease.

Development of Mucoadhesive Buccal Film for Rizatriptan: In Vitro and In Vivo Evaluation

The reduced therapeutic efficacy of rizatriptan in migraine treatment is primarily due to low oral bioavailability and extensive first pass metabolism. The purpose of this investigation was to optimize the thin mucoadhesive buccal film of rizatriptan and assess the practicability of its development as a potential substitute for conventional migraine treatment. Buccal films (FR1-FR10) were fabricated by a conventional solvent casting method utilizing a combination of polymers (Proloc, hydroxypropyl methylcellulose and Eudragit RS 100). Drug-loaded buccal films (F1-F4) were examined for mechanical, mucoadhesive, swelling and release characteristics. In vivo pharmacokinetics parameters of selected buccal film (F1) in rabbits were compared to oral administration. Films F1-F4 displayed optimal physicomechanical properties including mucoadhesive strength, which can prolong the buccal residence time. A biphasic, complete and higher drug release was seen in films F1 and F4, which followed Weibull model kinetics. The optimized film, F1, exhibited significantly higher (p < 0.005) rizatriptan buccal flux (71.94 ± 8.26 µg/cm²/h) with a short lag time. Film features suggested the drug particles were in an amorphous form, compatible with the polymers used and had an appropriate surface morphology suitable for buccal application. Pharmacokinetic data indicated a significantly higher rizatriptan plasma level (p < 0.005) and C_max (p < 0.0001) upon buccal film application as compared to oral solution. The observed AUC_0-12h (994.86 ± 95.79 ng.h/mL) in buccal treatment was two-fold higher (p < 0.0001) than the control, and the relative bioavailability judged was 245%. This investigation demonstrates the prospective of buccal films as a viable and alternative approach for effective rizatriptan delivery.

Formulation and Pharmacokinetic Evaluation of a Drug-in-Adhesive Patch for Transdermal Delivery of Koumine

The aim of this study was to develop a suitable drug-in-adhesive patch for transdermal delivery of koumine. Acrylic polymer Duro-Tak® 87-4287, which contains hydroxyl groups, may significantly enhance the skin permeation of koumine from transdermal patches containing 0.93-3.72% koumine. Among permeation enhancers, 10% azone showed the greatest potential and increased the flux of koumine to 1.48-fold that of the control. Therefore, an optimized patch formulation containing 3.72% koumine and 10% azone in Duro-Tak® 87-4287 that offers good physical properties was selected for an in vivo pharmacokinetic study using rats. The maximal plasma drug concentration (C_max) of koumine after transdermal administration (4 mg/patch) was 25.80 ± 1.51 ng/mL, which was in the range of those after oral administration (3 mg/kg and 15 mg/kg). The time to the maximal concentration (T_max) and the half-life (t_1/2) of the drug with transdermal administration were 3.96 ± 0.46 h and 21.10 ± 1.36 h, respectively, which were longer than those with oral administration. Furthermore, the area under the concentration-time curve (AUC_0-72 h) of 898.20 ± 45.57 ng·h/mL for the transdermal patch was much higher than that for oral administration (15 mg/kg). In conclusion, the drug-in-adhesive patch containing koumine provides a steady plasma koumine level and sustained release in vivo and can be an effective means of transdermal delivery for koumine.

Vesicular Emulgel Based System for Transdermal Delivery of Insulin: Factorial Design and in Vivo Evaluation

Transdermal delivery of insulin is a great challenge due to its poor permeability through the skin. The aim of the current investigation was to evaluate the prospective of insulin loaded niosome emulgel as a noninvasive delivery system for its transdermal therapy. A 23 full-factorial design was used to optimize the insulin niosome emulgel by assessing the effect of independent variables (concentration of paraffin oil, Tween 80 and sodium carboxymethyl cellulose) on dependent variables (in vitro release, viscosity and in vitro permeation). The physical characteristics of the prepared formulations were carried out by determining viscosity, particle size, entrapment efficiency, drug loading, drug release and kinetics. In vitro permeation studies were carried out using rat skin membrane. Hypoglycemic activity of prepared formulations was assessed in diabetic-induced rats. It was observed that the independent variables influenced the dependent variables. A significant difference (p < 0.05) in viscosity was noticed between the prepared gels, which in turn influenced the insulin release. The order of permeation is: insulin niosome emulgel > insulin niosome gel > insulin emulgel > insulin gel > insulin niosomes > insulin solution. The enhancement in transdermal flux in insulin niosome emulgel was 10-fold higher than the control (insulin solution). In vivo data significantly demonstrated reduction (p < 0.05) of plasma glucose level (at six hours) by insulin niosome emulgel than other formulations tested. The results suggest that the developed insulin niosome emulgel could be an efficient carrier for the transdermal delivery of insulin.

Wedelolactone-Loaded Micelles Ameliorate Doxorubicin-Induced Oxidative Injury in Podocytes by Improving Permeability and Bioavailability

Wedelolactone (WED) is commonly used for the treatment of doxorubicin (DOX)-induced kidney damage, but its efficacy is limited by its poor solubility and bioavailability. In this study, we developed a novel delivery system of WED-loaded micelles (WED-M) with Solutol^® HS15 and lecithin at an optimized ratio of 7:3 to improve the poor permeability and bioavailability of WED and to enhance its efficacy. The spherically shaped WED-M (particle size: 160.5 ± 3.4 nm; zeta potential: −30.1 ± 0.9 mV; entrapment efficiency: 94.41 ± 1.64%; drug loading: 8.58 ± 0.25%; solubility: 1.89 ± 0.06 mg/ml) has continuous stability over 14 days and a sustained release profile. The permeability of WED-M in Caco-2 cells indicated a significant 1.61-fold higher Papp AP to BL ratio than WED alone. Additionally, pharmacokinetic evaluation of WED-M demonstrated that the bioavailability of WED was increased 2.78-fold. Both HE staining and transmission electron microscopy showed an obvious improvement of pathological damage in WED-M treatment. Moreover, WED-M significantly enhanced the ROS level in mice and MPC5 podocytes. We concluded that using this micelle delivery system for WED could improve its permeability and bioavailability to attenuate DOX-induced oxidative injury in podocytes. This study provided important information on the fact that the micelle delivery system, WED-M, showed a significant improvement of renal damage.