Design and Evaluation of a Poly(Lactide-co-Glycolide)-Based In Situ Film-Forming System for Topical Delivery of Trolamine Salicylate

Formulation study of PLGA in situ films for topical delivery of salicylates

A film-forming system (FFS) represents a convenient topical dosage form for drug delivery. In this study, a non-commercial poly(lactic-co-glycolic acid) (PLGA) was chosen to formulate an FFS containing salicylic acid (SA) and methyl salicylate (MS). This unique combination is advantageous from a therapeutic point of view, as it enabled modified salicylate release. It is beneficial from a technological perspective too, because it improved thermal, rheological, and adhesive properties of the in situ film. DSC revealed complete dissolution of SA and good miscibility of MS with the polymer. MS also ensures optimal viscoelastic and adhesive properties of the film, leading to prolonged and sustained drug release. The hydrolysis of MS to active SA was very slow at skin pH 5.5, but it apparently occurred at physiological pH 7.4. The film structure is homogeneous without cracks, unlike some commercial preparations. The dissolution study of salicylates revealed different courses in their release and the influence of MS concentration in the film. The formulated PLGA-based FFS containing 5 % SA and 10 % MS is promising for sustained and prolonged local delivery of salicylates, used mainly for keratolytic and anti-inflammatory actions and pain relief.

Properties of Poly (Lactic-co-Glycolic Acid) and Progress of Poly (Lactic-co-Glycolic Acid)-Based Biodegradable Materials in Biomedical Research

In recent years, biodegradable polymers have gained the attention of many researchers for their promising applications, especially in drug delivery, due to their good biocompatibility and designable degradation time. Poly (lactic-co-glycolic acid) (PLGA) is a biodegradable functional polymer made from the polymerization of lactic acid (LA) and glycolic acid (GA) and is widely used in pharmaceuticals and medical engineering materials because of its biocompatibility, non-toxicity, and good plasticity. The aim of this review is to illustrate the progress of research on PLGA in biomedical applications, as well as its shortcomings, to provide some assistance for its future research development.

Newfangled Topical Film-Forming Solution for Facilitated Antifungal Therapy: Design, Development, Characterization, and In Vitro Evaluation

Luliconazole is a broad-spectrum topical antifungal agent that acts by altering the synthesis of fungi cell membranes. Literature suggests that the recurrence of fungal infection can be avoided by altering the pH of the site of infection. Studies have also suggested that fungi thrive by altering skin pH to be slightly acidic, i.e., pH 3-5. The current study is aimed to design, develop, characterize, and evaluate an alkaline pH-based antifungal spray solution for antifungal effects. Luliconazole was used as an antifungal agent and an alkaline spray was formulated for topical application by using Eudragit RS 100, propylene glycol (PG), water, sodium bicarbonate, and ethanol via solubilization method. Herein, sodium bicarbonate was used as an alkalizing agent. Based on DSC, FTIR, PXRD, scanning electron microscopy (SEM), and rheological analysis outcomes, the drug (luliconazole) and polymer were found to be compatible. F-14 formulation containing 22% Eudragit RS 100 (ERS), 1.5% PG, and 0.25% sodium bicarbonate was optimized by adopting the quality by design approach by using design of experiment software. The viscosity, pH, drying time, volume of solution post spraying, and spray angle were, 14.99 ± 0.21 cp, 8 pH, 60 s, 0.25 mL ± 0.05 mL, and 80 ± 2, respectively. In vitro drug diffusion studies and in vitro antifungal trials against Candida albicans revealed 98.0 ± 0.2% drug diffusion with a zone of inhibition of 9 ± 0.12 mm. The findings of the optimized luliconazole topical film-forming solution were satisfactory, it was compatible with human skin, and depicted sustained drug release that suggests promising applicability in facilitated topical antifungal treatments.

Investigation of Alogliptin-Loaded In Situ Gel Implants by 23 Factorial Design with Glycemic Assessment in Rats

The aim of the study was to design injectable long-acting poly (lactide-co-glycolide) (PLGA)-based in situ gel implants (ISGI) loaded with the anti-diabetic alogliptin. Providing sustained therapeutic exposures and improving the pharmacological responses of alogliptin were targeted for achieving reduced dosing frequency and enhanced treatment outputs. In the preliminary study, physicochemical characteristics of different solvents utilized in ISGI preparation were studied to select a proper solvent possessing satisfactory solubilization capacity, viscosity, water miscibility, and affinity to PLGA. Further, an optimization technique using a 2³ factorial design was followed. The blood glucose levels of diabetic rats after a single injection with the optimized formulation were compared with those who received daily oral alogliptin. N-methyl-2-pyrrolidone (NMP) and dimethyl sulfoxide (DMSO), as highly water-miscible and low viscous solvents, demonstrated their effectiveness in successful ISGI preparation and controlling the burst alogliptin release. The impact of increasing lactide concentration and PLGA amount on reducing the burst and cumulative alogliptin release was represented. The optimized formulation comprising 312.5 mg of PLGA (65:35) and DMSO manifested a remarkable decrease in the rats’ blood glucose levels throughout the study period in comparison to that of oral alogliptin solution. Meanwhile, long-acting alogliptin-loaded ISGI systems demonstrated their feasibility for treating type 2 diabetes with frequent dosage reduction and patient compliance enhancement.

A Recent Update on Drug Delivery Systems for Pain Management

Pain remains a global health challenge affecting approximately 1.5 billion people worldwide. Pain has been an implicit variable in the equation of human life for many centuries considering different types and the magnitude of pain. Therefore, developing an efficacious drug delivery system for pain management remains an open challenge for researchers in the field of medicine. Lack of therapeutic efficacy still persists, despite high throughput studies in the field of pain management. Research scientists have been exploiting different alternatives to curb the adverse side effects of pain medications or attempting a more substantial approach to minimize the prevalence of pain. Various drug delivery systems have been developed such as nanoparticles, microparticles to curb adverse side effects of pain medications or minimize the prevalence of pain. This literature review firstly provides a brief introduction of pain as a sensation and its pharmacological interventions. Second, it highlights the most recent studies in the pharmaceutical field for pain management and serves as a strong base for future developments. Herein, we have classified drug delivery systems based on their sizes such as nano, micro, and macro systems, and for each of the reviewed systems, design, formulation strategies, and drug release performance has been discussed.

Leflunomide Loaded Chitosan Nanoparticles for the Preparation of Aliphatic Polyester Based Skin Patches

In the present study, the preparation of controlled-released leflunomide (LFD)-loaded skin patches was evaluated, utilizing the combination of chitosan (CS) nanoparticles (NPs) incorporated into suitable poly(l-lactic acid) (PLLA) or poly(lactic-co-glycolic acid) (PLGA) polyester matrices. Initially, LFD-loaded CS NPs of ~600 nm and a smooth surface were prepared, while strong inter-molecular interactions between the drug and the CS were unraveled. In the following step, the prepared LFD-loaded CS NPs were incorporated into PLLA or PLGA, and thin-film patches were prepared via spin-coating. Analysis of the prepared films showed that the incorporation of the drug-loaded CS NPs resulted in a significant increase in the drug’s release rate and extent as compared to neat LFD-loaded polyester patches (i.e., prepared without the use of CS NPs). In-depth analysis of the prepared formulations showed that the amorphization of the drug within the matrix and the increased wetting properties of the prepared CS NPs were responsible for the improved thin-film patch characteristics.

PLGA based film forming systems for superficial fungal infections treatment

As proven in clinical trials, superficial fungal infections can be effectively treated by single topical application of terbinafine hydrochloride (Ter-HCl) in a film forming system (FFS). Poly(lactic-co-glycolic acid) (PLGA) derivatives, originally synthesized with intention to get carriers with optimized properties for drug delivery, and multifunctional plasticizers - ethyl pyruvate, methyl salicylate, or triacetin - were used for formulation of Ter-HCl loaded FFSs. After spraying, a biodegradable, transparent, adhesive, and occlusive thin layer is formed on the skin, representing drug depot. In situ formed films were characterized by thermal, structural, viscoelastic, and antifungal properties as well as drug release and skin penetration. DSC and SEM showed fully amorphous films with Ter-HCl dissolved in PLGA in high concentration (up to 15%). FFSs are viscoelastic fluids with viscosity which can be easily adjusted by the type of plasticizer used and its concentration. The formulations showed excellent bioadhesion properties, thus ensuring persistence on the skin. In situ film based on branched PLGA/A plasticized with 10% of ethyl pyruvate allowed prolonged release of Ter-HCl by linear kinetics for the first 6 days with a total time of almost 14 days. During ex vivo human skin penetration experiment, Ter-HCl was found to be located only in its target layer, the epidermis. According to our results, plasticized branched PLGA derivatives loaded by Ter-HCl are suitable for the development of FFSs for superficial fungal infections treatment.

A New Approach to Ex Vivo Permeation Studies in In-Situ Film-Forming Systems

The skin is the largest human organ and an important topical route. Even with some challenges, it is an important ally in medication administration, mainly because it is painless and easy-to-apply. Semisolid formulations are the most used dosage forms for drug administration via this delivery route and can be optimized when transformed into a film, favoring on-site maintenance, and promoting drug permeation. However, in situ film-forming systems are difficult to assess and characterize using Franz-type diffusion cells once this apparatus is ideal to formulations without transition phases. The present study proposed a different method to characterize these formulations and provide complementary data on drug and penetration enhancer behaviors, as close as possible to real application conditions. This characterization method allowed us to analyze drug concentration on three necessary occasions: remaining in the polymer film, stratum corneum using adhesive tape, and skin to check where drugs will have a desirable effect. As a proof-of-concept, the proposed ex vivo permeation method was used to evaluate a film-forming system containing lidocaine and prilocaine. We could also evaluate transition phases of drug compositions and quantify drugs at key times after application. Hence, the developed method may be used to provide complementary data to the Franz diffusion cell method, in terms of drug and penetration enhancer behaviors incorporated into film-forming delivery systems.

Co-delivery of terbinafine hydrochloride and urea with an in situ film-forming system for nail targeting treatment

Onychomycosis is a chronic nail disorder consisting of a fungal infection that causes physical and psychosocial discomfort to patients. However, its treatment remains challenging owing to the barrier of the highly keratinized nail plate and the short time that conventional formulations reside on nails. In this work, we developed an in situ film-forming system(IFFS) based on Eudragit® RLPO to co-deliver terbinafine hydrochloride (TBH) and urea, i.e., TBH-urea-RLPO IFFS, with the aim of overcoming the nail barrier, prolonging the residence time, and efficiently treating onychomycosis. The IFFS formulation formed a thin film with good appearance and adhesion upon application in situ. The physical states of TBH and urea in the film were evaluated with polarization microscopy and powder X-ray diffraction. TBH and urea were both amorphousmiscible components within the RLPO film. TBH release from TBH-urea-RLPO IFFS fitted to the Korsmeyer-Pappas model, and the cumulative release at 72 h was significantly higher than that from commercial preparations (Lamisil Pedisan® once). In vitro permeation of TBH from TBH-urea-RLPO IFFS through bovine hoof membranes was evaluated in comparison with the film containing TBH alone (TBH-RLPO) and commercial preparations. The retention and cumulative permeated amount of TBH were significantly enhanced for the TBH-urea-RLPO IFFS (170.80 ± 44.63 μg/cm²vs 75.49 ± 21.50 μg/cm²vs 60.25 ± 27.38 μg/cm²; 61.81 ± 16.09 μg/cm²vs 21.80 ± 11.56 μg/cm²vs 7.91 ± 1.03 μg/cm², respectively), and the membranes treated with different formulations were observed with SEM and FTIR to identify the denaturing effect of urea on bovine hoof keratin. In vitro antifungal tests against Trichophyton rubrum,Microsporum canis, Fusarium, and Aspergillus fumigatus were cultured on Muller-Hinton agar; the findings indicated that TBH-urea-RLPO IFFS enhanced TBH antifungal activity. Overall, the results support that TBH-urea-RLPO IFFS is an efficient and promising approach for onychomycosis targeting treatment.