Optimal Connection for Tiotropium SMI Delivery through Mechanical Ventilation: An In Vitro Study

Aerosol Delivery via Continuous High-Frequency Oscillation During Mechanical Ventilation

BACKGROUND

As the use of continuous high-frequency oscillation combined with nebulization during mechanical ventilation becomes more prevalent clinically, it is important to evaluate its aerosol delivery efficacy.

METHODS

A bench study was conducted that simulated 2 adult and 2 pediatric conditions. A continuous high-frequency oscillation device integrated into the inspiratory limb of a conventional critical care ventilator was attached to an endotracheal tube (ETT) with a collection filter and test lung. High-frequency oscillation with high-flow setting was used with jet nebulizers attached to the manifold, and a vibrating mesh nebulizer placed between the ETT and the ventilator circuit versus at the inlet of the humidifier. Albuterol (2.5 mg in 3 mL) was nebulized for each condition (no. = 3). The drug was eluted from the collection filter and assayed with ultraviolet spectrophotometry (276 nm).

RESULTS

During continuous high-frequency oscillation, the mean inhaled dose with jet nebulizers was low (<2% with the adult settings and <1% with the pediatric settings). Across both adult and pediatric conditions, when the vibrating mesh nebulizer was placed between the ETT and the Y-piece during continuous high-frequency oscillation, the inhaled dose was higher than with the placement of the vibrating mesh nebulizer at the inlet of the humidifier, median 11.1% (IQR 7.0%-13.7%) median 6.0% (IQR 3.9%-7.2%) (P = .002) respectively, but still lower than the inhaled dose with the vibrating mesh nebulizer placed at the inlet of the humidifier with continuous high-frequency oscillation off, median 22.7% (IQR 19.5%-25.4%) versus median 11.1% (IQR 7.0%-13.7%) (P < .001). The inhaled dose with the 10-year-old scenario was higher than with the 5-year-old scenario in all settings except aerosol delivery via continuous high-frequency oscillation.

CONCLUSIONS

During invasive mechanical ventilation with continuous high-frequency oscillation, aerosol delivery with jet nebulizers in the manifold resulted in a marginal inhaled dose. The vibrating mesh nebulizer at the ETT during continuous high-frequency oscillation delivered 6-fold more aerosol than did the jet nebulizer, while delivering only half of the inhaled dose with the vibrating mesh nebulizer placed at the inlet of the humidifier without continuous high-frequency oscillation.

Aerosol delivery via invasive ventilation: a narrative review

In comparison with spontaneously breathing non-intubated subjects, intubated, mechanically ventilated patients encounter various challenges, barriers, and opportunities in receiving medical aerosols. Since the introduction of mechanical ventilation as a part of modern critical care medicine during the middle of the last century, aerosolized drug delivery by jet nebulizers has become a common practice. However, early evidence suggested that aerosol generators differed in their efficacies, and the introduction of newer aerosol technology (metered dose inhalers, ultrasonic nebulizer, vibrating mesh nebulizers, and soft moist inhaler) into the ventilator circuit opened up the possibility of optimizing inhaled aerosol delivery during mechanical ventilation that could meet or exceed the delivery of the same aerosols in spontaneously breathing patients. This narrative review will catalogue the primary variables associated with this process and provide evidence to guide optimal aerosol delivery and dosing during mechanical ventilation. While gaps exist in relation to the appropriate aerosol drug dose, discrepancies in practice, and cost-effectiveness of the administered aerosol drugs, we also present areas for future research and practice. Clinical practice should expand to incorporate these techniques to improve the consistency of drug delivery and provide safer and more effective care for patients.

Effect of Tiotropium Soft Mist Inhalers on Dynamic Changes in Lung Mechanics of Patients with Chronic Obstructive Pulmonary Disease Receiving Mechanical Ventilation: A Prospective Pilot Study

The effects of tiotropium bromide soft mist inhalers (SMIs) in patients with chronic obstructive pulmonary disease (COPD) receiving mechanical ventilation remain unexplored. This study investigated the dynamic effects of a tiotropium SMI on lung mechanics and gas exchange in these patients. We analyzed 11 mechanically ventilated and hemodynamically stable patients with COPD who experienced acute exacerbation and were ready to be weaned from the ventilator. Two puffs of tiotropium (2.5 μg/puff) were administered with a T-adaptor connected to the ventilator circuit. Lung mechanics—peak inspiratory pressure, plateau pressure, mean airway pressure, maximum respiratory resistance (Rrs), and gas exchange function—were analyzed. The two-puff tiotropium SMI treatment led to the greatest reduction in Rrs at 6 h, with the Rrs returning to baseline gradually, and significantly improved the PaO₂/FiO₂ ratio at 24 h. Compared with baseline values, tiotropium SMI had the strongest effect on Rrs between hours 3 and 6 but did not significantly affect hemodynamic parameters. Tiotropium SMI administration in mechanically ventilated patients with COPD achieved the greatest reduction in Rrs at 6 h and significantly improved the PaO₂/FiO₂ ratio at 24 h. Future studies should investigate whether the bronchodilation effect can be improved with increased dosage or frequency.

In Vitro Measurements of Spiriva Respimat Dose Delivery in Mechanically Ventilated Tracheostomy Patients

Background: For patients with severe chronic obstructive pulmonary disease under invasive mechanical ventilation, medication for aerosol therapy is delivered through tracheostomy or endotracheal airways. Typically, these medications (such as bronchodilators) are long-acting formulations that are delivered through Soft Mist^™ Inhalers (SMI), or Pressurized Metered-Dose Inhalers. The Respimat^® SMI has been shown to have increased efficiency because of its slow and prolonged aerosol mist and has gained popularity in clinical settings. However, the Respimat was not designed for drug delivery through artificial airways. Therefore, there is a need for SMI adapters in intensive care for use in mechanical ventilator circuits. The purpose of this study was to evaluate the performance of a new Respimat adapter (ODAPT^™ for mechanical ventilator [ODAPT MV]) for use in mechanical ventilator circuits which, in combination with a Pulmodyne T-piece adapter, allows use without interruption of the circuit in case of medication replacement. Methods: Tiotropium delivery to the lungs, using Respimat, was assessed using the ODAPT MV adapter within an in vitro setup, including a three-dimensional printed trachea model and a mechanical ventilator. Medication deposition and losses were investigated using two commonly used tracheostomy tube (TT) sizes (6 and 8 mm inner canula) for two flow rates (45 and 60 L/min) under different conditions (30%-50%. and 100% relative humidity [RH]). Medication delivery using the ODAPT MV adapter was compared with the RTC-26C in-line adapter under similar conditions (8 mm TT size, 100% RH at 45 L/min). Results: It was found that 7.1%-13.4% of the nominal dose (ND) was lost in the ODAPT MV adapter for different TT size, RH, and flow rates used. Higher losses were found in the inhaler's mouthpiece ranging from 15.7% to 29.1% ND. The percentage of the delivered medication reaching the lungs was determined to be 13.7%-18.5% ND delivered without significant differences between the experimental conditions tested. The ODAPT MV performed well compared with the RTC-26C under similar conditions (17.9% and 16.6% ND, respectively). Conclusion: The medication delivered through mechanical ventilation using the ODAPT MV adapter represents about one third the dose delivered directly through the Respimat SMI in vivo.