Insights into the Control of Drug Release from Complex Immediate Release Formulations

Impact of immediate release film coating on the disintegration process of tablets

Pharmaceutical tablets are often coated with a layer of polymeric material to protect the drug from environmental degradation, facilitate the packaging process, and enhance patient compliance. However, the detailed effects of such coating layers on drug release are not well understood. To investigate this, flat-faced pure microcrystalline cellulose tablets with a diameter of 13 mm and a thickness between 1.5 mm to 1.6 mm were directly compressed, and a film coating layer with a thickness of 80 μm to 120 μm was applied to one face of these tablets. This tablet geometry and immediate release film coating were chosen as a model system to understand how the film coating interacts with the tablet core. The coating hydration and dissolution process was studied using terahertz pulsed imaging, while optical coherence tomography was used to capture further details on the swelling process of the polymer in the coated tablet. The study investigated the film coating polymer dissolution process and found the gelling of dissolving polymer restricted the capillary liquid transport in the core. These findings can help predict the dissolution of film coating within the typical range of thickness (30 μm to 40 μm) and potentially be extended to understand modified release coating formulations.

The impact of diluents on the compaction, dissolution, and physical stability of amorphous solid dispersion tablets

Amorphous solid dispersion (ASD) is an effective approach for enhancing the solubility, dissolution, and bioavailability of poorly water-soluble drugs. However, these metastable forms can transform into more thermodynamically stable but less soluble crystalline forms. Despite this challenge, research on processing ASDs into solid dosage forms, such as tablets, is lacking. This work aims to fill this gap by investigating the impact of common diluents on the tableting behavior, dissolution, and physical stability of ASDs composed of itraconazole and hypromellose acetate succinate. Four widely used diluents found in commercially available ASD tablets were selected for the study: microcrystalline cellulose (MCC), anhydrous lactose, starch, and mannitol. The performance of ASD tablets varied significantly depending on the diluent used. Tablets prepared with MCC exhibited higher mechanical strength than those formulated using other diluents. ASD tablets containing mannitol and lactose revealed a faster release rate than those composed of MCC or starch. Notably, the study highlighted that the physical stability of ASDs within a tablet is not solely dependent on the amount of sorbed water; crystalline diluents like lactose and mannitol were found to facilitate ASD recrystallization within a tablet. In summary, the study underscores the importance of excipient selection, considering factors such as mechanical strength, dissolution rate, and physical stability of ASD tablets. These findings offer valuable insights into the selection of excipients for downstream ASD tablet development, leading to improved manufacturability, physical stability, and the overall quality of ASD drug products.

Studying the dissolution of immediate release film coating using terahertz pulsed imaging

Coated tablets introduce complexity to the dissolution process, even with readily soluble immediate release coating layers. Therefore, a more detailed understanding of the physical steps involved in the dissolution process can improve the efficiency of formulation and process design. The current study uses terahertz pulsed imaging to visualise the hydration process of microcrystalline cellulose (MCC) tablet cores that were film coated with an immediate release coating formulation upon exposure to the dissolution medium. Film coated tablets that were prepared from three levels of core porosity (10%, 20% and 30%) and with coating thickness in the range of 30μm to 250μm were investigated. It was possible to resolve and quantify the distinct stages of wetting of the coating layer, swelling of the MCC particles at the core surface, and dissolution of the coating layer followed by the ingress of dissolution media into the tablet core. The liquid transport process through the coating layer was highly consistent and scalable. The penetration rate through the coating layer and the tablet core both strongly depended on coating thickness and core porosity.

Drug-Release Mechanisms Elucidated by Imaging Techniques: Visualizing the Invisible!

Imaging techniques such as Raman spectroscopy, electron microscopy, laser scanning confocal microscopy, atomic force microscopy, tomography, magnetic resonance imaging, and terahertz are powerful tools to elucidate drug-release mechanisms from different types of delivery devices [...]

Visualising liquid transport through coated pharmaceutical tablets using Terahertz pulsed imaging

Dissolution of pharmaceutical tablets is a complex process, especially for coated tablets where layered structures form an additional barrier for liquid transport into the porous tablet matrix. A better understanding of the role of the coating structure in the mass transport processes that govern drug release, starting with the wetting of the coating layer by the dissolution medium, can benefit the formulation design and optimisation of the production. For this study, terahertz pulsed imaging was used to investigate how dissolution medium can penetrate coated tablets. In order to focus on the fundamental process, the model system for this proof-of-principle study consisted of tablet cores made from pure microcrystalline cellulose compacted to a defined porosity coated with Opadry II, a PVA-based immediate release coating blend. The coating was applied to a single side of flat-faced tablets using vacuum compression moulding. It was possible to resolve the hydration of the coating layer and the subsequent liquid ingress into the dry tablet core. The analysis revealed a discontinuity in density at the interface between coating and core, where coating polymer could enter the pore space at the immediate surface of the tablet cores during the coating process. This structure affected the liquid transport of the dissolution medium into the core. We found evidence for the formation of a gel layer upon hydration of the coating polymer. The porosity of the tablet core impacted the quality of coating and thus affected its dissolution performance (r =  0.6932 for the effective liquid penetration rate RP_eff and the core porosity). This study established a methodology and can facilitate a more in-depth understanding of the role of coating on tablet dissolution.

Tablet formulation development focusing on the functional behaviour of water uptake and swelling

The functional behaviour of tablets is strongly influenced by their manufacturing process and the choice of excipients. Water uptake and swelling are prerequisites for tablet disintegration, dispersion and hence active pharmaceutical ingredient (API) dissolution. High proportions of polymeric excipients in tablets, which are typically used as API carriers in amorphous solid dispersions (ASDs), may be challenging due to the formation of a gelling polymer network (GPN). In this study, systematic investigations into the formulation development of tablets containing polymeric and other excipients are performed by water uptake and swelling analysis. The impact of tablet composition and porosity as well as pH of the test medium are investigated. The pH affects the analysis results for Eudragit L100-55 and Eudragit EPO. HPMC and Kollidon VA64 inhibit water uptake and swelling of tablets due to the formation of a GPN. High tablet porosity, coarse particle size of the polymer and the addition of fillers and disintegrants can reduce the negative impact of a GPN on tablet performance. The application of lubricants slows down the analysed processes. Water uptake and swelling data are fitted to an empirical model obtaining four characteristic parameters to facilitate the simple quantitative assessment of varying tablet formulations and structural properties.