Distribution of Drug Substances in Solid Lipid Microparticles (SLM)—Methods of Analysis and Interpretation

Drug Release from Lipid Microparticles-Insights into Drug Incorporation and the Influence of Physiological Factors

The aim of this study was to assess the impact of physiological factors, namely tear fluid and lysozyme enzyme, as well as surfactant polysorbate, on the release profile from solid lipid microparticles (SLM), in the form of dispersion intended for ocular application. Indomethacin (Ind) was used as a model drug substance and a release study was performed by applying the dialysis bag method. Conducting release studies taking into account physiological factors is expected to improve development and screening studies, as well as support the regulatory assessment of this multi-compartment lipid dosage form. The effect of the lysozyme was directly related to its effect on lipid microparticles, as it occurred only in their presence (no effect on the solubility of Ind). Polysorbate also turned out to be an important factor interacting with the SLM surface, which determined the release of Ind from SLM. However, in study models without tear fluid or lysozyme, the release of Ind did not exceed 60% within 96 h. Ultimately, only the simultaneous application of artificial tear fluid, lysozyme, and polysorbate allowed for the release of 100% of Ind through the SLM dispersion. The examination of the residues after the release studies indicated the possibility of releasing 100% of Ind from SLM without complete degradation of the microparticles' matrix. The incubation of SLM with tear fluid confirmed a similar influence of physiological factors contained in tear fluid on the surface structure of SLM as that observed during the in vitro studies.

Development of solid lipid microparticles (SLMs) containing asiatic acid for topical treatment of acne: Characterization, stability, in vitro and in vivo anti-acne assessment

Solid lipid microparticles (SLMs) represent a promising approach for drug delivery in anti-acne applications. In this study, asiatic acid-loaded SLMs (AASLMs) were prepared by melt emulsification method in conjunction with freeze-drying. Comprehensive evaluations comprised particle size, %entrapment efficiency (%EE), %labeled amount (%LA), surface morphology, stability, %release, %skin permeation, and anti-acne activity. The AASLMs exhibited an average particle size ranging from 7.46 to 38.86 µm, with %EE and %LA falling within the range of 31.56 to 100.00 and 90.43 to 95.38, respectively. The AASLMs demonstrated a spherical shape under scanning electron microscopy, and maintained stability over a 3-month period. Notably, formulations with 10 % and 15 % cetyl alcohol stabilized with poloxamer-188 (specifically F6 and F12) displayed a minimum inhibitory concentration (MIC) value of 75 mg/ml against Cutibacterium acnes. Furthermore, F12 exhibited a higher %release and %skin permeation compared to F6 over 24 h. In a single-blind clinical trial involving fifteen participants with mild-to-moderate acne, F12 showcased its potential not only in reducing porphyrin intensity and enhancing skin barriers but also in significantly improving skin hydration and brightness. However, further investigations with larger subject cohorts encompassing diverse age groups and genders are necessary to thoroughly establish the performance of the developed AASLMs.

Microparticles and multi-unit systems for advanced drug delivery

Microparticles have unique benefits in the formulation of multiparticulate and multi-unit type pharmaceutical dosage forms allowing improved drug safety and efficacy with favorable pharmacokinetics and patient centricity. On the other hand, the above advantages are served by high and well reproducible quality attributes of the medicinal product where even flexible design and controlled processability offer success as well as possible longer product life-cycle for the manufacturers. Moreover, the specific demands of patients can be taken into account, including simplified dosing regimens, flexible dosage, drug combinations, palatability, and ease of swallowing. In the more than 70 years since the first modified-release formulation appeared on the market, many new formulations have been marketed and many publications have appeared in the literature. More unique and newer pharmaceutical technologies and excipients have become available for producing tailor-made particles with micrometer dimensions and beyond. All these have contributed to the fact that the sub-units (e.g. minitablets, pellets, microspheres) that make up a multiparticulate system can vary widely in composition and properties. Some units have mucoadhesive properties and others can float to contribute to a suitable release profile that can be designed for the multiparticulate formula as a whole. Nowadays, there are some available formulations on the market, which are able to release the active substance even for several months (3 or 6 months depending on the type of treatment). In this review, the latest developments in technologies that have been used for a long time are presented, as well as innovative solutions such as the applicability of 3D printing to produce subunits of multiparticulate systems. Furthermore, the diversity of multiparticulate systems, different routes of administration are also presented, touching the ones which are capable of carrying the active substance as well as the relevant, commercially available multiparticle-based medical devices. The versatility in size from 1 µm and multiplicity of formulation technologies promise a solid foundation for the future applications of dosage form design and development.

A solid lipid particle formulation of long pepper extract reduces pain and astrocyte activation in a rat model of neuropathic pain

OBJECTIVES

To investigate the effects of solid lipid microparticle (SLM) creams containing a long pepper extract (LPE) or piperine on neuropathy-related pain and the expression of glial fibrillary acidic protein (GFAP) as a measure of astrogliosis.

METHODS

Neuropathic pain in male Spraque Dawley rats was induced by sciatic nerve ligation (SNL) and followed by treatment with LPE-SLM, piperine-SLM, capsaicin or vehicle creams. The pain score was assessed by thermal hyperalgesia test. The GFAP expression in the spinal cord was determined by immunohistochemistry.

RESULTS

Pain scores were significantly increased after SNL and decreased when treated by LPE-SLM. The number of GFAP immunopositive cells was significantly increased in the SNL rats. Treated by LPE-SLM and capsaicin creams resulted in a significant reduction of the number of GFAP immunopositive cells. The LPE-SLM treated rats showed greater effects than the piperine and capsaicin preparations.

CONCLUSIONS

The LPE-SLM cream has a potential effect on pain attenuation via a decrease of spinal astrocyte activation-related mechanism. The LPE in SLM preparation could provide an alternative therapeutic strategy for treating neuropathic pain.

Tailoring the release of drugs having different water solubility by hybrid polymer-lipid microparticles with a biphasic structure

The aim of this study is to investigate the potential of hybrid polymer-lipid microparticles with a biphasic structure (b-MPs) as drug delivery system. Hybrid b-MPs of Compritol®888 ATO as main lipid constituent of the shell and polyethylene glycol 400 as core material were produced by an innovative solvent-free approach based on spray congealing. To assess the suitability of hybrid b-MPs to encapsulate various types of APIs, three model drugs (fluconazole, tolbutamide and nimesulide) with extremely different water solubility were loaded into the polymeric core. The hybrid systems were characterized in terms of particle size, morphology and physical state. Various techniques (e.g. optical, Confocal Raman and Scanning Electron Microscopy) were used to investigate the influence of the drugs on different aspects of the b-MPs, including external and internal morphology, properties at the lipid/polymer interface and drug distribution. Hybrid b-MPs were suitable for the encapsulation of all drugs (encapsulation efficiency > 90 %) regardless the drug hydrophobic/hydrophilic properties. Finally, the drug release behaviors from hybrid b-MPs were studied and compared with traditional solid lipid MPs (consisting of only the lipid carrier). Due to the combination of lipid and polymeric materials, hybrid b-MPs showed a wide array of release profiles that depends on their composition, the type of loaded drug, the drug loading amount and location, providing a versatile platform and allowing the formulators to finely balance the release performance of drugs intended for oral administration. Overall, the study demonstrates that hybrid, solvent-free b-MPs produced by spray congealing are an extremely versatile delivery platform able to efficiently encapsulate and release very different types of drug compounds.

Comparison of the In Vitro Drug Release Methods for the Selection of Test Conditions to Characterize Solid Lipid Microparticles

The release profiles of active substances from microspheres are one of the most important features in solid lipid microparticles (SLM) characterization. Unfortunately, the results of the dissolution tests are largely dependent on the chosen method and test conditions, which in relation to novel dosage forms, such as dispersions of lipid microspheres, are not clearly defined in international compendiums and guidelines. This makes it impossible to compare the results of different studies. The aim of the research was to identify the factors most influencing the variability of the obtained results. An attempt was also made to select the most appropriate method for testing drug substance release from SLM. Various dissolution methods were employed (method I: without a membrane, method II: in a dialysis bag, and method III: in a Side-Bi-Side chamber), and the obtained release profiles of cyclosporine and indomethacin from SLM dispersions were compared. In addition to the effect of membranes, the types of acceptor fluids were also investigated. Significant differences were observed when testing the SLM formulations under various test conditions. The results were significantly influenced by the selected membrane, the acceptor fluid, or the difference in the concentrations of active substance between the donor and acceptor compartments. The burst effect observed in some experimental methods was not noticed in other conditions. At this stage, the method with a dialysis bag has been selected as the most suitable, while the methods without the membrane can only play a complementary role.