Cyclodextrin-Based Nanosponges as Perse Antimicrobial Agents Increase the Activity of Natural Antimicrobial Peptide Nisin

Nanosponge hydrogel of octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl) propanoate of Alcaligenes faecalis

Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl) propanoate (ODHP) was extracted in a previous study from the culture broth of soil isolate Alcaligenes faecalis MT332429 and showed a promising antimycotic activity. This study was aimed to formulate ODHP loaded β-cyclodextrins (CD) nanosponge (NS) hydrogel (HG) to control skin fungal ailments since nanosponges augment the retention of tested agents in the skin. Box-Behnken design was used to produce the optimized NS formulation, where entrapment efficiency percent (EE%), polydispersity index (PDI), and particle size (PS) were assigned as dependent parameters, while the independent process parameters were polyvinyl alcohol % (w/v %), polymer-linker ratio, homogenization time, and speed. The carbopol 940 hydrogel was then created by incorporating the nanosponges. The hydrogel fit Higuchi's kinetic release model the best, according to in vitro drug release. Stability and photodegradation studies revealed that the NS-HG remained stable under tested conditions. The formulation also showed higher in vitro antifungal activity against Candida albicans compared to the control fluconazole. In vivo study showed that ODHP-NS-HG increased survival rates, wound contraction, and healing of wound gap and inhibited the inflammation process compared to the other control groups. The histopathological examinations and Masson's trichrome staining showed improved healing and higher records of collagen deposition. Moreover, the permeability of ODHP-NS-HG was higher through rats' skin by 1.5-folds compared to the control isoconazole 1%. Therefore, based on these results, NS-HG formulation is a potential carrier for enhanced and improved topical delivery of ODHP. Our study is a pioneering research on the development of a formulation for ODHP produced naturally from soil bacteria. KEY POINTS: • Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl) propanoate was successfully formulated as a nanosponge hydrogel and statistically optimized. • The new formula exhibited in vitro good stability, drug release, and higher antifungal activity against C. albicans as compared to the fluconazole. • Ex vivo showed enhanced skin permeability, and in vivo analysis showed high antifungal activity as evidenced by measurement of various biochemical parameters and histopathological examination.

Synthesis and Characterization of a Novel Chitosan-Based Nanoparticle-Hydrogel Composite System Promising for Skin Wound Drug Delivery

As a natural preservative, nisin is widely used in the food industry, while its application in biomedicine is limited due to its susceptibility to interference from external conditions. In this study, a nanoparticle-hydrogel composite system was designed to encapsulate and release nisin. Nisin nanoparticles were identified with a smooth, spherical visual morphology, particle size of 122.72 ± 4.88 nm, polydispersity coefficient of 0.473 ± 0.063, and zeta potential of 23.89 ± 0.37 mV. Based on the sample state and critical properties, three temperature-sensitive hydrogels based on chitosan were ultimately chosen with a rapid gelation time of 112 s, outstanding reticular structure, and optimal swelling ratio of 239.05 ± 7.15%. The composite system exhibited the same antibacterial properties as nisin, demonstrated by the composite system's inhibition zone diameter of 17.06 ± 0.83 mm, compared to 20.20 ± 0.58 mm for nisin, which was attributed to the prolonged release effect of the hydrogel at the appropriate temperature. The composite system also demonstrated good biocompatibility and safety, making it suitable for application as short-term wound dressings in biomedicine due to its low hemolysis rate of less than 2%. In summary, our nanoparticle-based hydrogel composite system offers a novel application form of nisin while ensuring its stability, thereby deepening and broadening the employment of nisin.

Oxygen Nanocarriers for Improving Cardioplegic Solution Performance: Physico-Chemical Characterization

Nanocarriers for oxygen delivery have been the focus of extensive research to ameliorate the therapeutic effects of current anti-cancer treatments and in the organ transplant field. In the latter application, the use of oxygenated cardioplegic solution (CS) during cardiac arrest is certainly beneficial, and fully oxygenated crystalloid solutions may be excellent means of myocardial protection, albeit for a limited time. Therefore, to overcome this drawback, oxygenated nanosponges (NSs) that can store and slowly release oxygen over a controlled period have been chosen as nanocarriers to enhance the functionality of cardioplegic solutions. Different components can be used to prepare nanocarrier formulations for saturated oxygen delivery, and these include native α-cyclodextrin (αCD), αcyclodextrin-based nanosponges (αCD-NSs), native cyclic nigerosyl-nigerose (CNN), and cyclic nigerosyl-nigerose-based nanosponges (CNN-NSs). Oxygen release kinetics varied depending on the nanocarrier used, demonstrating higher oxygen release after 24 h for NSs than the native αCD and CNN. CNN-NSs presented the highest oxygen concentration (8.57 mg/L) in the National Institutes of Health (NIH) CS recorded at 37 °C for 12 h. The NSs retained more oxygen at 1.30 g/L than 0.13 g/L. These nanocarriers have considerable versatility and the ability to store oxygen and prolong the amount of time that the heart remains in hypothermic CS. The physicochemical characterization presents a promising oxygen-carrier formulation that can prolong the release of oxygen at low temperatures. This can make the nanocarriers suitable for the storage of hearts during the explant and transport procedure.

Nanosponges- Versatile Platform as Drug Carrier

BACKGROUND

Recently, nano-drug delivery systems have become an integral part of the most novel drug delivery systems and have gained considerable importance owing to various advantages such as carriers for poorly soluble drugs, targeting molecules at the desired site, protection from degradation etc. Objective: One of the most studied areas of nanotechnology is nanosponges. The objective of this review was to extensively summarize the various strategies for the preparation, characterization and applications of nanosponges.

METHODS

In the current mini-review, we conducted a systemic search of the literature and patent inventions focusing on nanosponges. The summary of the search was inclusive of various aspects of nanosponges, such as drug characteristics to be considered while incorporating in nanosponges, other crucial additives during formulation of nanosponges, methods of preparation, characterization and applications of nanosponges in pharmaceuticals.

RESULTS

Nanosponges are nanocarriers for both lipophilic and hydrophilic drugs. These are prepared by different methods such as emulsion-solvent evaporation, solvent method, melting method, ultrasound assisted method etc., and all these methods were less time consuming, more economical and evaluated by sophisticated techniques available for routine analysis. These are among the most feasible alternative to address several formulation difficulties associated with the physicochemical properties of the drug. The porous nature and small particle size are vital properties of the nanosponges that contribute crucially to correcting the drawbacks of the drug. The properties of the nanosponges can be enhanced when combined with cyclodextrins. Extensive research work has been carried out in past to explore cyclodextrin based nanosponges. Besides, it is also used for smart targeting of tumors and for drug release in a sustainable pattern. Nanosponges can be prepared by simple methods. These can be tuned to release the drug by different routes so as to achieve the maximum benefits of the drug.

CONCLUSION

Huge amount of research has been carried out on nanosponges as drug carrier. The method of preparation and characterization of nanosponges are quite economical and routinely available. Owing to potential benefits and probable applications, these can be used as efficient carriers for certain drugs. The authors expect that the current review will guide the investigation of the nanosponges as nanodrug delivery systems.

Antimicrobial Active Packaging Containing Nisin for Preservation of Products of Animal Origin: An Overview

The preservation of food represents one of the greatest challenges in the food industry. Active packaging materials are obtained through the incorporation of antimicrobial and/or antioxidant compounds in order to improve their functionality. Further, these materials are used for food packaging applications for shelf-life extension and fulfilling consumer demands for minimal processed foods with great quality and safety. The incorporation of antimicrobial peptides, such as nisin, has been studied lately, with a great interest applied to the food industry. Antimicrobials can be incorporated in various matrices such as nanofibers, nanoemulsions, nanoliposomes, or nanoparticles, which are further used for packaging. Despite the widespread application of nisin as an antimicrobial by directly incorporating it into various foods, the use of nisin by incorporating it into food packaging materials is researched at a much smaller scale. The researchers in this field are still in full development, being specific to the type of product studied. The purpose of this study was to present recent results obtained as a result of using nisin as an antimicrobial agent in food packaging materials, with a focus on applications on products of animal origin. The findings showed that nisin incorporated in packaging materials led to a significant reduction in the bacterial load (the total viable count or inoculated strains), maintained product attributes (physical, chemical, and sensorial), and prolonged their shelf-life.

β-Cyclodextrin-Based Nanosponges Inclusion Compounds Associated with Gold Nanorods for Potential NIR-II Drug Delivery

This article describes the synthesis and characterization of two nanocarriers consisting of β-cyclodextrin-based nanosponges (NSs) inclusion compounds (ICs) and gold nanorods (AuNRs) for potential near-infrared II (NIR-II) drug-delivery systems. These nanosystems sought to improve the stability of two drugs, namely melphalan (MPH) and curcumin (CUR), and to trigger their photothermal release after a laser irradiation stimulus (1064 nm). The inclusion of MPH and CUR inside each NS was confirmed by field emission scanning electron microscopy (FE-SEM), Raman spectroscopy, Fourier transform infrared spectroscopy, (FT-IR) differential scanning calorimetry (DSC), transmission electron microscopy (TEM), and proton nuclear magnetic resonance (1H-NMR). Furthermore, the association of AuNRs with both ICs was confirmed by FE-SEM, energy-dispersive spectroscopy (EDS), TEM, dynamic light scattering (DLS), ζ-potential, and UV–Vis. Moreover, the irradiation assays demonstrated the feasibility of the controlled-photothermal drug release of both MPH and CUR in the second biological window (1000–1300 nm). Finally, MTS assays depicted that the inclusion of MPH and CUR inside the cavities of NSs reduces the effects on mitochondrial activity, as compared to that observed in the free drugs. Overall, these results suggest the use of NSs associated with AuNRs as a potential technology of controlled drug delivery in tumor therapy, since they are efficient and non-toxic materials.

Dextrin-Based Nanohydrogels for Rokitamycin Prolonged Topical Delivery

Macrolides are widely used antibiotics with a broad spectrum of activity. The development of drug carriers to deliver this type of antibiotics has attracted much research. The present study aims at developing new swellable dextrin-based nanohydrogels for the topical delivery of rokitamycin, as model macrolide. Rokitamycin is a synthetic analogous of macrolides with advantageous characteristics as far as bacterial uptake and post-antibiotic effect are concerned. It is also indicated for the treatment of severe infections caused by Acanthamoeba and for topical infections. The nanohydrogels have been prepared from two types of cross-linked polymers obtained by using β-cyclodextrin or Linecaps^® was provided by the Roquette Italia SPA (Cassano Spinola, Al, Italy) as building blocks. The cross-linked polymers have been then formulated into aqueous nanosuspensions refined and tuned to achieve the incorporation of the drug. Cross-linked β-cyclodextrin (β-CD) and Linecaps^® (LC) polymers formed dextrin-based nanohydrogels with high swelling degree and mucoadhesion capability. Rokitamycin was loaded into the nanohydrogels displaying an average size around 200 nm with negative surface charge. In vitro kinetic profiles of free and loaded drug in nanohydrogels were compared at two pH levels. Interestingly, a sustained and controlled release was obtained at skin pH level due to the high degree of swelling and a pH responsiveness possibly. The results collected suggest that these nanohydrogels are promising for the delivery of rokitamycin and may pave the way for the topical delivery of other macrolide antibiotics.