Effects of chemical and physical enhancement techniques on transdermal delivery of cyanocobalamin (vitamin B12) in vitro

Recent advances in delivery of transdermal nutrients: A review

Nutrients provide vital functions in the body for sustained health, which have been shown to be related to the incidence, prevention and treatment of disease. However, limited bioavailability, loss of targeting specificity and the increased hepatic metabolism limit the utilization of nutrients. In this review, we highlight transdermal absorption of nutrients, which represents an opportunity to allow great use of many nutrients with promising human health benefits. Moreover, we describe how the various types of permeation enhancers are increasingly exploited for transdermal nutrient delivery. Chemical penetration enhancers, carrier systems and physical techniques for transdermal nutrient delivery are described, with a focus on combinatorial approaches. Although there are many carrier systems and physical techniques currently in development, with some tools currently in advanced clinical trials, relatively few products have achieved full translation to clinical practice. Challenges and further developments of these tools are discussed here in this review. This review will be useful to researchers interested in transdermal applications of permeation enhancers for the efficient delivery of nutrients, providing a reference for supporting the need to take more account of specific nutritional needs in specific states.

The Preparation and Evaluation of Cyanocobalamin Mucoadhesive Sublingual Tablets

Cobalamin (vitamin B12), an essential vitamin with low oral bioavailability, plays a vital role in cellular functions. This research aimed to enhance the absorption of vitamin B12 using sublingual mucoadhesive tablets by increasing the residence time of the drug at the administration site. This research involved the preparation of different 50 mg placebo formulas using different methods. Formulas with disintegration times less than one minute and appropriate physical characteristics were incorporated into 1 mg of cyanocobalamin (S1-S20) using the direct compression method. The tablets obtained were evaluated ex vivo for residence time, and only those remaining for >15 min were included. The final formulas (S5, S8, S11, and S20) were evaluated in several ways, including pre- and post-compression, drug content, mucoadhesive strength, dissolution, and Permeapad® permeation test employed in the Franz diffusion cell. After conducting the evaluation, formula S11 (Eudragit L100-55) emerged as the most favorable formulation. It exhibited a mucoadhesive residence time of 118.2 ± 2.89 min, required a detachment force of 26 ± 1 g, maintained a drug content of 99.124 ± 0.001699%, and achieved a 76.85% drug release over 22 h, fitting well with the Peppas-Sahlin kinetic model (R2: 0.9949). This suggests that the drug release process encompasses the Fickian and non-Fickian kinetic mechanisms. Furthermore, Eudragit L100-55 demonstrated the highest permeability, boasting a flux value of 6.387 ± 1.860 µg/h/cm2; over 6 h. These findings indicate that including this polymer in the formulation leads to an improved residence time, which positively impacts bioavailability.

Three Dimensional Printing and Its Applications Focusing on Microneedles for Drug Delivery

Microneedles (MNs) are considered to be a novel smart injection system that causes significantly low skin invasion upon puncturing, due to the micron-sized dimensions that pierce into the skin painlessly. This allows transdermal delivery of numerous therapeutic molecules, such as insulin and vaccines. The fabrication of MNs is carried out through conventional old methods such as molding, as well as through newer and more sophisticated technologies, such as three-dimensional (3D) printing, which is considered to be a superior, more accurate, and more time- and production-efficient method than conventional methods. Three-dimensional printing is becoming an innovative method that is used in education through building intricate models, as well as being employed in the synthesis of fabrics, medical devices, medical implants, and orthoses/prostheses. Moreover, it has revolutionary applications in the pharmaceutical, cosmeceutical, and medical fields. Having the capacity to design patient-tailored devices according to their dimensions, along with specified dosage forms, has allowed 3D printing to stand out in the medical field. The different techniques of 3D printing allow for the production of many types of needles with different materials, such as hollow MNs and solid MNs. This review covers the benefits and drawbacks of 3D printing, methods used in 3D printing, types of 3D-printed MNs, characterization of 3D-printed MNs, general applications of 3D printing, and transdermal delivery using 3D-printed MNs.

Single step fabrication of hollow microneedles and an experimental package for controlled drug delivery

Hollow microneedle arrays (HMNs) are an excellent choice for managing chronic diseases requiring the administration of multiple drug doses over a prolonged duration. However, HMNs have gained partial success due to limitations in their manufacturing capabilities, and cumbersome processes. In the present study, polymeric HMNs were fabricated using a novel single-step drop-casting process without needing cleanroom facilities, and sophisticated instrumentation. When drop casted on the pyramidal tip stainless steel needles, the optimized polymer solution allowed the reproducible formation of desired height HMMs on a detachable acrylic base. To enable broader applications, the base with HMNs was integrated into an experimental package built to deliver a dose of ∼ 5 µL per 30° clockwise rotation of the actuator, allowing multiple metered drug dose administrations. The fabricated HMNs were optically imaged, and tested for mechanical integrity and stability. The working and functional utility of the HMNs package in delivering metered drug doses was demonstrated by delivering vitamin B12 (ex vivo) and insulin (in vivo), respectively. The optimized process can be used for the large-scale manufacturing of HMNs and the experimental package shows the potential to be further developed into a wearable device.

The most promising microneedle device: present and future of hyaluronic acid microneedle patch

Microneedle patch (MNP) is an alternative to the oral route and subcutaneous injection with unique advantages such as painless administration, good compliance, and fewer side effects. Herein, we report MNP as a prominent strategy for drug delivery to treat local or systemic disease. Hyaluronic acid (HA) has advantageous properties, such as human autologous source, strong water absorption, biocompatibility, and viscoelasticity. Therefore, the Hyaluronic acid microneedle patch (HA MNP) occupies a large part of the MNP market. HA MNP is beneficial for wound healing, targeted therapy of certain specific diseases, extraction of interstitial skin fluid (ISF), and preservation of drugs. In this review, we summarize the benefits of HA and cross-linked HA (x-HA) as an MNP matrix. Then, we introduce the types of HA MNP, delivered substances, and drug distribution. Finally, we focus on the biomedical application of HA MNP as an excellent drug carrier in some specific diseases and the extraction and analysis of biomarkers. We also discuss the future development prospect of HA MNP in transdermal drug delivery systems (TDDS).

Penetration Enhancement Strategies for Intradermal Delivery of Cromolyn Sodium

This study aimed to explore the use of chemical and physical enhancement strategies for the intradermal delivery of cromolyn sodium (CS) for treatment of atopic dermatitis. CS gels were formulated to individually contain 2.5 and 9% salcaprozate sodium (SNAC) as a potential chemical enhancer. The effect of microneedles, alone and in combination with SNAC, was investigated via in vitro permeation studies. Skin impedance and FTIR evaluation of SNAC-treated stratum corneum (SC) was done and compared to the control. The amount of drug delivered in the dermis after 24 h by the 2.5% and 9% SNAC gels was 23.29 ± 1.89 µg/cm² and 35.87 ± 2.23 µg/cm², respectively, which were significantly higher than the control (p < 0.05) but were not remarkably different from each other (p > 0.05). Microneedles enhanced permeation in both the control and 2.5% SNAC groups (p < 0.05); however, no synergistic enhancement was observed when microneedle and SNAC treatments were combined (p > 0.05). Over 24 h of treating the SC with 2.5% SNAC, FTIR evaluation showed stretches on the CH₂ asymmetric and symmetric stretching vibrations observed at 2920.23 cm^-1 and 2850.79 cm^-1 respectively in untreated SC, which shifted to higher wavenumbers and indicated some lipid fluidizing effect. However, no significant drop in skin impedance was seen with SNAC as compared to the control (p > 0.05). SNAC was concluded to have skin permeation enhancement effect on CS, while microneedles effectively enhanced CS permeation even in the absence of SNAC.

Microneedle system: a modulated approach for penetration enhancement

The microneedles show advantages over transdermal drug delivery systems on account of better skin permeation bypassing the stratum corneum. To increase the flux of permeation, penetration enhancement techniques like physical and chemical methods are combined with a trans-epidermal delivery system across the skin causing minimal pain. These techniques include iontophoresis, sonophoresis, and electroporation for physical enhancement of drug delivery via topical route by either disrupting the structure of the stratum corneum or by creating pores/micro-channels within the skin. The use of chemical penetrants such as ethanol, lipids, surfactants, and terpenes improves the release kinetics by mechanisms like fluidization of lipids, denaturation of proteins, etc. A combination of microneedles and these techniques show a significant increase in the permeability of drugs across the skin by 5-10 times compared to microneedles alone. This review article focuses on various advanced strategies like the use of drug-polymer complexes, application of ultrasound frequency or tolerable electric current, formation of nano-formulations, etc. with microneedle delivery for transportation of high payload of actives, macromolecules, antibodies, gene, proteins, and peptides. In the near future, microneedle systems will offer potential targeted drug delivery, self-sealable administration across the skin, and minimally invasive vaccine transportation in cancer, diabetes, Alzheimer's, and cardiovascular diseases.HighlightsPhysical penetration enhancement techniques: iontophoresis, electroporation, and sonophoresis.Chemical penetration enhancers: polymers, lipids, surfactants.Strategies to use microneedle system with penetration enhancement techniques.The significant difference in the penetration ability of high payload actives.

3D Printing-A "Touch-Button" Approach to Manufacture Microneedles for Transdermal Drug Delivery

Microneedles (MNs) represent the concept of attractive, minimally invasive puncture devices of micron-sized dimensions that penetrate the skin painlessly and thus facilitate the transdermal administration of a wide range of active substances. MNs have been manufactured by a variety of production technologies, from a range of materials, but most of these manufacturing methods are time-consuming and expensive for screening new designs and making any modifications. Additive manufacturing (AM) has become one of the most revolutionary tools in the pharmaceutical field, with its unique ability to manufacture personalized dosage forms and patient-specific medical devices such as MNs. This review aims to summarize various 3D printing technologies that can produce MNs from digital models in a single step, including a survey on their benefits and drawbacks. In addition, this paper highlights current research in the field of 3D printed MN-assisted transdermal drug delivery systems and analyzes parameters affecting the mechanical properties of 3D printed MNs. The current regulatory framework associated with 3D printed MNs as well as different methods for the analysis and evaluation of 3D printed MN properties are outlined.

Cyanocobalamin Ultraflexible Lipid Vesicles: Characterization and In Vitro Evaluation of Drug-Skin Depth Profiles

Atopic dermatitis (AD) and psoriasis are the most common chronic inflammatory skin disorders, which importantly affect the quality of life of patients who suffer them. Among other causes, nitric oxide has been reported as part of the triggering factors in the pathogenesis of both conditions. Cyanocobalamin (vitamin B₁₂) has shown efficacy as a nitric oxide scavenger and some clinical trials have given positive outcomes in its use for treating skin pathologies. Passive skin diffusion is possible only for drugs with low molecular weights and intermediate lipophilicity. Unfortunately, the molecular weight and hydrophilicity of vitamin B₁₂ do not predict its effective diffusion through the skin. The aim of this work was to design new lipid vesicles to encapsulate the vitamin B₁₂ to enhance its skin penetration. Nine prototypes of vesicles were generated and characterized in terms of size, polydispersity, surface charge, drug encapsulation, flexibility, and stability with positive results. Additionally, their ability to release the drug content in a controlled manner was demonstrated. Finally, we found that these lipid vesicle formulations facilitated the penetration of cyanocobalamin to the deeper layers of the skin. The present work shows a promising system to effectively administer vitamin B₁₂ topically, which could be of interest in the treatment of skin diseases such as AD and psoriasis.

A gene-coated microneedle patch based on industrialized ultrasonic spraying technology with a polycation vector to improve antitumor efficacy

A coated microneedle patch is a reliable way to load gene on a surface as a transdermal gene delivery platform. But there are many limitations to the traditional methods to fabricate a coated microneedle patch, such as the fact that they are time consuming or the difficulty in controlling the loading content. In this research, ultrasonic spraying technology, as an industrialized production method, was first used to fabricate a gene-coated microneedle patch. First, the p53 expression plasmid (p53 DNA) was ultrasonically sprayed on a polycaprolactone (PCL) microneedle patch (D@MNP). To promote the transfection efficiency, polycation polyethylenimine (PEI), as a vector, was then ultrasonically sprayed on D@MNP (P@D@MNP). From the experimental results, although two layers were sprayed step by step, no obvious stratification could be observed. The vector PEI interweaved with genes and inhibited the gene release profile, but it changed the released naked genes to positively charged complexes, which would promote gene transfection efficiency. In subsequent in vivo experiments, the anti-tumor efficacy of the "P@D@MNP treated group" could reach 84.7%, although it had the lowest gene release profile. In contrast, the anti-tumor efficacy of the "intravenous injection group" and "D@MNP treated group" was only 24.3% and 59.3%, respectively. Overall, P@D@MNP was a safe and efficient device to treat the subdermal tumor. Ultrasonic spraying technology provided an industrialized method to fabricate the coated microneedle patch as a transdermal gene/drug delivery platform.

Comparative Evaluation of the Transdermal Permeation Effectiveness of Fu's Cupping Therapy on Eight Different Types of Model Drugs

BACKGROUND

Overcoming the skin barrier to achieve the transdermal penetration of drugs across the Stratum Corneum (SC) remains a significant challenge. Our previous study showed that Fu's Cupping Therapy (FCT) contributes to the transdermal enhancement and percutaneous absorption rate of representative drugs and improves their clinical effects. This work evaluated the transdermal enhancement effect of FCT on drugs with different Molecular Weights (MW).

METHODS

We investigated the enhancements in the transdermal penetration of eight types of model drugs through the skin of BALB/c-nu mice and Sprague Dawley rats using Franz diffusion devices. In addition, 3% azone, 5% azone, 3% peppermint oil, and 5% peppermint oil were used as penetration enhancers to study the transdermal behaviour of these drugs.

RESULTS

Our results showed that the BALB/c-nu mouse skin was the best transdermal media, and the optimal time for FCT was 10 min. Compared with other penetration enhancers, FCT exerted a significantly improved effect on enhancing the percutaneous penetration of the selected log(P)- model drugs in addition to the two large MW drugs (ginsenoside Rg1 and notoginsenoside R1). Statistical analysis revealed that the relationship between the log(P) of various model drugs and the permeability coefficient [log(Pcm)] of the FCT group was log(Pcm)=0.080(log(P))2-0.136 (log(P))-0.282.

CONCLUSION

FCT may be used as a novel method for enhancing physical penetration and thus effectively promoting the transdermal absorption of drugs and might lay a foundation for future research on drug transdermal technology.

Microneedles: Characteristics, Materials, Production Methods and Commercial Development

Although transdermal drug delivery systems (DDS) offer numerous benefits for patients, including the avoidance of both gastric irritation and first-pass metabolism effect, as well as improved patient compliance, only a limited number of active pharmaceutical ingredients (APIs) can be delivered accordingly. Microneedles (MNs) represent one of the most promising concepts for effective transdermal drug delivery that penetrate the protective skin barrier in a minimally invasive and painless manner. The first MNs were produced in the 90s, and since then, this field has been continually evolving. Therefore, different manufacturing methods, not only for MNs but also MN molds, are introduced, which allows for the cost-effective production of MNs for drug and vaccine delivery and even diagnostic/monitoring purposes. The focus of this review is to give a brief overview of MN characteristics, material composition, as well as the production and commercial development of MN-based systems.

Transdermal delivery systems in cosmetics

Transdermal delivery systems have been intensively studied over the past 2 decades, with the focus on overcoming the skin barrier for more effective application of pharmaceutical and cosmetic products. Although the cosmeceutical industry has made a substantial progress in the development and incorporation of new and effective actives in their products, the barrier function of the skin remains a limiting factor in the penetration and absorption of these actives. Enhancement via modification of the stratum corneum by hydration, acting of chemical enhancers on the structure of stratum corneum lipids, and partitioning and solubility effects are described. This review summarizes the advances in the development and mechanisms of action of chemical components that act as permeation enhancers, as well as the advances in appropriate vehicles, such as gels, emulsions, and vesicular delivery systems, that can be used for effective transdermal delivery.

Methods to assess vitamin B12 bioavailability and technologies to enhance its absorption

Vitamin B12 (B-12) deficiency is still relatively common in low-, medium-, and high-income countries, mainly because of dietary inadequacy and, to a lesser extent, malabsorption. This narrative review is based on a systematic search of evidence on methods to assess B-12 bioavailability and technologies to enhance its absorption. A total of 2523 scientific articles identified in PubMed and 1572 patents identified in Orbit Intelligence were prescreened. Among the reviewed methods, Schilling's test and/or its food-based version (using cobalamin-labeled egg yolk) were used for decades but have been discontinued, largely because they required radioactive cobalt. The qualitative CobaSorb test, based on changes in circulating holo-transcobalamin before and after B-12 administration, and the 14C-labeled B-12 test for quantitative measurement of absorption of a low-dose radioactive tracer are currently the best available methods. Various forms of B-12 co-formulated with chemical enhancers (ie, salcaprozate sodium, 8-amino caprylate) or supplied via biotechnological methods (ie, microbiological techniques, plant cells expressing cobalamin binding proteins), encapsulation techniques (ie, emulsions, use of chitosan particles), and alternative routes of administration (ie, intranasal, transdermal administration) were identified as potential technologies to enhance B-12 absorption in humans. However, in most cases the evidence of absorption enhancement is limited.

Bio-Functional Textiles: Combining Pharmaceutical Nanocarriers with Fibrous Materials for Innovative Dermatological Therapies

In the field of pharmaceutical technology, significant attention has been paid on exploiting skin as a drug administration route. Considering the structural and chemical complexity of the skin barrier, many research works focused on developing an innovative way to enhance skin drug permeation. In this context, a new class of materials called bio-functional textiles has been developed. Such materials consist of the combination of advanced pharmaceutical carriers with textile materials. Therefore, they own the possibility of providing a wearable platform for continuous and controlled drug release. Notwithstanding the great potential of these materials, their large-scale application still faces some challenges. The present review provides a state-of-the-art perspective on the bio-functional textile technology analyzing the several issues involved. Firstly, the skin physiology, together with the dermatological delivery strategy, is keenly described in order to provide an overview of the problems tackled by bio-functional textiles technology. Secondly, an overview of the main dermatological nanocarriers is provided; thereafter the application of these nanomaterial to textiles is presented. Finally, the bio-functional textile technology is framed in the context of the different dermatological administration strategies; a comparative analysis that also considers how pharmaceutical regulation is conducted.

Acid-Treated Water-Soluble Chitosan Suitable for Microneedle-Assisted Intracutaneous Drug Delivery

Chitosan has been widely used as a nature-derived polymeric biomaterial due to its high biocompatibility and abundance. However, poor solubility in aqueous solutions of neutral pH and multiple fabrication steps for the molding process limit its application to microneedle technology as a drug delivery carrier. Here, we present a facile method to prepare water-soluble chitosan and its application for sustained transdermal drug delivery. The water-soluble chitosan was prepared by acid hydrolysis using trifluoroacetic acid followed by dialysis in 0.1 M NaCl solutions. We successfully fabricated bullet-shaped microneedle (MN) arrays by the single molding process with neutral aqueous chitosan solutions (pH 6.0). The chitosan MN showed sufficient mechanical properties for skin insertion and, interestingly, exhibited slow dissolving behavior in wet conditions, possibly resulting from a physical crosslinking of chitosan chains. Chitosan MN patches loading rhodamine B, a model hydrophilic drug, showed prolonged release kinetics in the course of the dissolving process for more than 72 h and they were found to be biocompatible to use. Since the water-soluble chitosan can be used for MN fabrication in the mild conditions (neutral pH and 25 °C) required for the loading of bioactive agents such as proteins and achieve a prolonged release, this biocompatible chitosan MN would be suitable for sustained transdermal drug delivery of a diverse range of drugs.

Effects of chemical and physical enhancement techniques on transdermal delivery of 3-fluoroamphetamine hydrochloride

The present study investigated the passive transdermal delivery of 3-fluoroamphetamine hydrochloride (PAL-353) and evaluated the effects of chemical and physical enhancement techniques on its permeation through human skin. In vitro drug permeation studies through dermatomed human skin were performed using Franz diffusion cells. Passive permeation of PAL-353 from propylene glycol and phosphate buffered saline as vehicles was studied. Effect of oleic acid, maltose microneedles, ablative laser, and anodal iontophoresis on its transdermal permeation was investigated. Infrared spectroscopy, scanning electron microscopy, calcein imaging, confocal laser microscopy, and histology studies were used to characterize the effects of chemical and physical treatments on skin integrity. Passive permeation of PAL-353 (propylene glycol) after 24h was found to be 1.03±0.17μg/cm². Microneedles, oleic acid, and laser significantly increased the permeation to 7.35±4.87μg/cm², 38.26±5.56μg/cm², and 523.24±86.79μg/cm² (p<0.05), respectively. A 548-fold increase in drug permeation was observed using iontophoresis as compared to its passive permeation from phosphate buffered saline (p<0.05). The characterization studies depicted disruption of the stratum corneum by microneedles and laser treatment. Overall, transdermal permeation of PAL-353 was significantly enhanced by the use of chemical and physical enhancement techniques.

Fabrication, characterization and application of sugar microneedles for transdermal drug delivery

Aim: This study aimed to fabricate, characterize and use maltose microneedles for transdermal delivery of doxorubicin. Materials & methods: Microneedles were fabricated by micromolding technique and evaluated for dimensions, mechanical properties and in situ dissolution. Microporation of human cadaver skin was confirmed by dye binding, histology, pore uniformity, confocal laser microscopy and skin integrity measurement. In vitro permeation studies were performed on vertical Franz diffusion cells. Results: Maltose microneedles were sharp, mechanically uniform and rapidly dissolvable. Microneedle insertion resulted in a marked decrease in lag time and a significant increase in the permeation across and into human skin (p < 0.05). The skin delivery profile was used to predict the steady-state plasma concentration. Conclusion: Maltose microneedles are a promising physical technique to increase skin delivery.

The Effect and Mechanism of Transdermal Penetration Enhancement of Fu's Cupping Therapy: New Physical Penetration Technology for Transdermal Administration with Traditional Chinese Medicine (TCM) Characteristics

Background: In this paper, a new type of physical penetration technology for transdermal administration with traditional Chinese medicine (TCM) characteristics is presented. Fu’s cupping therapy (FCT), was established and studied using in vitro and in vivo experiments and the penetration effect and mechanism of FCT physical penetration technology was preliminarily discussed. Methods: With 1-(4-chlorobenzoyl)-5-methoxy-2-methylindole-3-ylacetic acid (indomethacin, IM) as a model drug, the establishment of high, medium, and low references was completed for the chemical permeation system via in vitro transdermal tests. Furthermore, using chemical penetration enhancers (CPEs) and iontophoresis as references, the percutaneous penetration effect of FCT for IM patches was evaluated using seven species of in vitro diffusion kinetics models and in vitro drug distribution; the IM quantitative analysis method in vivo was established using ultra-performance liquid chromatography-tandem mass spectrometry technology (UPLC-MS/MS), and pharmacokinetic parameters: area under the zero and first moment curves from 0 to last time t (AUC_0–t, AUMC_0–t), area under the zero and first moment curves from 0 to infinity (AUC_0–∞, AUMC_0–∞), maximum plasma concentration (C_max) and mean residence time (MRT), were used as indicators to evaluate the percutaneous penetration effect of FCT in vivo. Additionally, we used the 3^K factorial design to study the joint synergistic penetration effect on FCT and chemical penetration enhancers. Through scanning electron microscopy (SEM) and transmission electron microscope (TEM) imaging, micro- and ultrastructural changes on the surface of the stratum corneum (SC) were observed to explore the FCT penetration mechanism. Results: In vitro and in vivo skin permeation experiments revealed that both the total cumulative percutaneous amount and in vivo percutaneous absorption amount of IM using FCT were greater than the amount using CPEs and iontophoresis. Firstly, compared with the control group, the indomethacin skin percutaneous rate of the FCT low-intensity group (FCTL) was 35.52%, and the enhancement ratio (ER) at 9 h was 1.76X, roughly equivalent to the penetration enhancing effect of the CPEs and iontophoresis. Secondly, the indomethacin percutaneous ratio of the FCT middle-intensity group (FCTM) and FCT high-intensity group (FCTH) were 47.36% and 54.58%, respectively, while the ERs at 9 h were 3.58X and 8.39X, respectively. Thirdly, pharmacokinetic data showed that in vivo indomethacin percutaneous absorption of the FCT was much higher than that of the control, that of the FCTM was slightly higher than that of the CPE, and that of the FCTM group was significantly higher than all others. Meanwhile, variance analysis indicated that the combination of the FCT penetration enhancement method and the CPE method had beneficial effects in enhancing skin penetration: the significance level of the CPE method was 0.0004, which was lower than 0.001, meaning the difference was markedly significant; the significance level of the FCT was also below 0.0001 and its difference markedly significant. The significance level of factor interaction A × B was lower than 0.0001, indicating that the difference in synergism was markedly significant. Moreover, SEM and TEM images showed that the SC surfaces of Sprague-Dawley rats treated with FCT were damaged, and it was difficult to observe the complete surface structure, with SC pores growing larger and its special “brick structure” becoming looser. This indicated that the barrier function of the skin was broken, thus revealing a potentially major route of skin penetration. Conclusion: FCT, as a new form of transdermal penetration technology, has significant penetration effects with TCM characteristics and is of high clinical value. It is worth promoting its development.

Effects of Microbubble Size on Ultrasound-Induced Transdermal Delivery of High-Molecular-Weight Drugs

The transdermal delivery of a wide range of high-molecular-weight drugs is limited by the stratum corneum layer of the epidermis representing a significant barrier to penetration across the skin. This study first determined the different effects of different-size ultrasound (US) contrast agents and microbubbles (MBs) for enhancing the transdermal delivery of high-molecular-weight drugs. The effects of US-mediated different-size (1.4, 2.1, and 3.5 μm) MBs (as a contrast agent) and ascorbyl tetraisopalmitate (VC-IP) on enhancing skin transdermal delivery were demonstrated both in vitro and in vivo. The results indicated that at a power density of 3 W/cm² the penetration depth in group US combined with 3.5-μm MBs and penetrating VC-IP (U+3.5) was 34% and 14% higher than those in groups US combined with 1.4-μm MBs and penetrating VC-IP (U+1.4) and US combined with 2.1-μm MBs and penetrating VC-IP (U+2.1), respectively, for the agarose phantoms, while the corresponding increases for pigskin were 37% and 19%.In terms of the skin permeation of VC-IP, the VC-IP concentration in group U+3.5 was 23% and 10% higher in than those in groups U+1.4 and U+2.1, respectively. The whitening effect (luminosity index) of mice skin in group U+3.5 had increased (significantly) by 28% after 1 week, by 34% after 2 weeks, and tended to stabilize after 3 weeks (45%) in C57BL/6J mice over a 4-week experimental period. The results obtained in this study indicate that combining US with MBs of different sizes can produce different degrees of skin permeability so as to enhance the delivery of VC-IP to inhibit melanogenesis, without damaging the skin in mice.