Sub- and Supercritical Extraction of Slovenian Hops (Humulus lupulus L.) Aurora Variety Using Different Solvents

Optimization of Antifungal Properties of Hop Cone Carbon Dioxide Extracts Based on Response Surface Methodology

Response surface methodology (RSM) was employed to optimize the process parameters of the supercritical carbon dioxide extraction of hop cones in terms of their antifungal properties against Fusarium culmorum and Aspergillus niger. The effects of temperature (40-50 °C), pressure (200-300 bar), and CO2 consumption (25-75 kgCO2/kg) on the extraction yield, content of α- and β-acids, as well as pathogens' growth inhibition were investigated. Both pressure and CO2 consumption had a significant effect on antifungal properties. It was observed that the best results for antifungal properties were obtained when hop cones were extracted with pure carbon dioxide at the temperature of 50 °C, under the pressure of 300 bar with CO2 consumption at the level of 75 kgCO2/kg of feed for extraction. The highest antifungal properties of hop cone supercritical carbon dioxide extracts were analyzed as 100% for Fusarium culmorum and 68% for Aspergillus niger, calculated as the growth inhibition of tested pathogens. The aim of the study was to determine the optimum values of extraction parameters to achieve the maximum response and enable us to investigate the interaction of these parameters on the antifungal properties of hop cone extracts.

Extraction and Separation of Natural Products from Microalgae and Other Natural Sources Using Liquefied Dimethyl Ether, a Green Solvent: A Review

Microalgae are a sustainable source for the production of biofuels and bioactive compounds. This review discusses significant research on innovative extraction techniques using dimethyl ether (DME) as a green subcritical fluid. DME, which is characterized by its low boiling point and safety as an organic solvent, exhibits remarkable properties that enable high extraction rates of various active compounds, including lipids and bioactive compounds, from high-water-content microalgae without the need for drying. In this review, the superiority of liquefied DME extraction technology for microalgae over conventional methods is discussed in detail. In addition, we elucidate the extraction mechanism of this technology and address its safety for human health and the environment. This review also covers aspects related to extraction equipment, various applications of different extraction processes, and the estimation and trend analysis of the Hansen solubility parameters. In addition, we anticipate a promising trajectory for the expansion of this technology for the extraction of various resources.

Surfactant-Free Decellularization of Porcine Auricular Cartilage Using Liquefied Dimethyl Ether and DNase

The most common decellularization method involves lipid removal using surfactant sodium dodecyl sulfate (SDS) and DNA fragmentation using DNase, and is associated with residual SDS. We previously proposed a decellularization method for the porcine aorta and ostrich carotid artery using liquefied dimethyl ether (DME), which is free from the concerns associated with SDS residues, instead of SDS. In this study, the DME + DNase method was tested on crushed porcine auricular cartilage tissues. Unlike with the porcine aorta and the ostrich carotid artery, it is important to degas the porcine auricular cartilage using an aspirator before DNA fragmentation. Although approximately 90% of the lipids were removed using this method, approximately 2/3 of the water was removed, resulting in a temporary Schiff base reaction. The amount of residual DNA in the tissue was approximately 27 ng/mg dry weight, which is lower than the regulatory value of 50 ng/mg dry weight. Hematoxylin and eosin staining confirmed that cell nuclei were removed from the tissue. Residual DNA fragment length assessment by electrophoresis confirmed that the residual DNA was fragmented to less than 100 bp, which was lower than the regulatory limit of 200 bp. By contrast, in the uncrushed sample, only the surface was decellularized. Thus, although limited to a sample size of approximately 1 mm, liquefied DME can be used to decellularize porcine auricular cartilage. Thus, liquefied DME, with its low persistence and high lipid removal capacity, is an effective alternative to SDS.

Predicting the essential oil composition in supercritical carbon dioxide extracts from hop pellets using mathematical modeling

Supercritical fluid extraction from hops (Humulus lupulus L.) can be used to extract essential oil for the flavoring of beer. With a special focus on the oil composition being linked to the hop aroma, the influence of pressure and temperature on the extraction kinetics of seven oil components (β-myrcene, α-humulene, β-caryophyllene, 2-methylbutyl isobutyrate, undecanone, linalool, and α-pinene) is analyzed and modeled in this article. Supercritical CO₂ extraction from hop pellets was conducted at pressure-temperature combinations of 90/100/110 bar and 40/45/50 °C. The extract composition over time, analyzed by gas chromatography, was used for the parameterization of two existing mechanistic models: an internal-mass-transfer-control (IMTC), and a broken-and-intact-cells (BIC) model. The IMTC model was found to effectively describe most extraction kinetics and hence applied in this study. In contrast to previous studies, the IMTC model parameters were not only fitted to individual extraction curves from different experiments but also correlated to temperature and pressure as a further step towards model-based prediction. Using the parameterized model, the extract composition was predicted at 95 bar/48 °C, 105 bar/42 °C, and 105 bar/48 °C. Extraction yields were found to be higher at lower temperatures and higher pressures in general. The sensitivity towards pressure was observed to differ between components and to be particularly higher for β-myrcene compared with α-humulene. Changes of the essential oil composition with a variation in pressure and temperature were predicted correctly by the model with a mean relative deviation from experimental data of 11.7% (min. 1.2%, max. 36.2%).

Using Hydrofluorocarbon Extracts of Hop in a Pilot Scale Brewing Process

In recent years, the use of hop extracts in industrial and home brewing processes as an alternative to hop cones or pellets usually added to wort during boiling has become increasingly popular. These extracts represent concentrated sources of bitter compounds, i.e., α- and β-acids, which are involved in some of the main reactions that take place in the wort and are responsible for the bitterness and the final quality of beer. This work aims at proposing a novel extraction technique, using a hydrofluorocarbon solvent in subcritical conditions; this process provided an extraction yield of 19% and an α-acid recovery of approximately 49% in 120 min of process. The α-acid isomerization kinetics of thermally treated hop extracts were studied and compared with those of both hop pellets and a CO2 extract. Laboratory scale tests showed that shorter boiling times were needed using hydrofluorocarbon and CO2 extracts (approximately 25 min and 34 min, respectively) to reach the same isomerization efficiency of 16.73%, achieved in 50 min of boiling with pellets. Moreover, the process was scaled up and the possibility of considerably reducing the conventional treatment times using hydrofluorocarbon extracts was confirmed: the same isomerization yield (9.1%) obtained after 50 min using the traditional procedure with hop pellets was reached in a shorter time of approximately 35 min in a pilot apparatus.

Hop (Humulus lupulus L.) Essential Oils and Xanthohumol Derived from Extraction Process Using Solvents of Different Polarity

This study evaluates the content of essential oils (EOs) and prenylated flavonoid Xanthohumol (XN) in extracts of Slovenian hops, cultivar Aurora, obtained by using fluids of different polarity. It is a continuation of our previous work, investigating the extraction of bitter acids from hops. Extraction was conducted semi-continuously, using sub- and supercritical fluids of different polarity, i.e., carbon dioxide (CO2) and propane as non-polar and dimethyl ether (DME) as the polar solvent. The experiments explored a temperature range between 20 °C and 80 °C and pressures ranging from 50 bar to 150 bar. The content of XN in extracts was analysed using high-performance liquid chromatography and experiments demonstrated the largest concentration of XN was obtained using DME. In order to analyse the EO components in extracts, connected with a distinct odour, the steam distillation of extracts was performed and GC analysis was employed. Hop oil derived from CO2 extracts at specific conditions, had the highest relative concentration of linalool, β-caryophyllene and α-humulene, and oil derived from propane extracts had the highest content of all other five selected components (myrcene, geraniol, farnesene, α-selinene and δ-cadinene). The relative content of the investigated EO components in DME extracts was similar to that in propane extracts.

Supercritical CO2 Plant Extracts Show Antifungal Activities against Crop-Borne Fungi

Fungal infections of cultivated food crops result in extensive losses of crops at the global level, while resistance to antifungal agents continues to grow. Supercritical fluid extraction using CO₂ (SFE-CO₂) has gained attention as an environmentally well-accepted extraction method, as CO₂ is a non-toxic, inert and available solvent, and the extracts obtained are, chemically, of greater or different complexities compared to those of conventional extracts. The SFE-CO₂ extracts of Achillea millefolium, Calendula officinalis, Chamomilla recutita, Helichrysum arenarium, Humulus lupulus, Taraxacum officinale, Juniperus communis, Hypericum perforatum, Nepeta cataria, Crataegus sp. and Sambucus nigra were studied in terms of their compositions and antifungal activities against the wheat- and buckwheat-borne fungi Alternaria alternata, Epicoccum nigrum, Botrytis cinerea, Fusarium oxysporum and Fusarium poae. The C. recutita and H. arenarium extracts were the most efficacious, and these inhibited the growth of most of the fungi by 80% to 100%. Among the fungal species, B. cinerea was the most susceptible to the treatments with the SFE-CO₂ extracts, while Fusarium spp. were the least. This study shows that some of these SFE-CO₂ extracts have promising potential for use as antifungal agents for selected crop-borne fungi.