Somatic Embryogenesis from Mature Embryos of Olea europaea L. cv. 'Galega Vulgar' and Long-Term Management of Calli Morphogenic Capacity

Primary Metabolite Screening Shows Significant Differences between Embryogenic and Non-Embryogenic Callus of Tamarillo (Solanum betaceum Cav.)

Tamarillo is a solanaceous tree that has been extensively studied in terms of in vitro clonal propagation, namely somatic embryogenesis. In this work, a protocol of indirect somatic embryogenesis was applied to obtain embryogenic and non-embryogenic callus from leaf segments. Nuclear magnetic resonance spectroscopy was used to analyze the primary metabolome of these distinct calli to elucidate possible differentiation mechanisms from the common genetic background callus. Standard multivariate analysis methods were then applied, and were complemented by univariate statistical methods to identify differentially expressed primary metabolites and related metabolic pathways. The results showed carbohydrate and lipid metabolism to be the most relevant in all the calli assayed, with most discriminant metabolites being fructose, glucose and to a lesser extent choline. The glycolytic rate was higher in embryogenic calli, which shows, overall, a higher rate of sugar catabolism and a different profile of phospholipids with a choline/ethanolamine analysis. In general, our results show that a distinct primary metabolome between embryogenic and non-embryogenic calli occurs and that intracellular levels of fructose and sucrose and the glucose to sucrose ratio seem to be good candidates as biochemical biomarkers of embryogenic competence.

Understanding the Role of PIN Auxin Carrier Genes under Biotic and Abiotic Stresses in Olea europaea L

The PIN-FORMED (PIN) proteins represent the most important polar auxin transporters in plants. Here, we characterized the PIN gene family in two olive genotypes, the Olea europaea subsp. europaea var. sylvestris and the var. europaea (cv. ‘Farga’). Twelve and 17 PIN genes were identified for vars. sylvestris and europaea, respectively, being distributed across 6 subfamilies. Genes encoding canonical OePINs consist of six exons, while genes encoding non-canonical OePINs are composed of five exons, with implications at protein specificities and functionality. A copia-LTR retrotransposon located in intron 4 of OePIN2b of var. europaea and the exaptation of partial sequences of that element as exons of the OePIN2b of var. sylvestris reveals such kind of event as a driving force in the olive PIN evolution. RNA-seq data showed that members from the subfamilies 1, 2, and 3 responded to abiotic and biotic stress factors. Co-expression of OePINs with genes involved in stress signaling and oxidative stress homeostasis were identified. This study highlights the importance of PIN genes on stress responses, contributing for a holistic understanding of the role of auxins in plants.

In Vitro Stress-Mediated Somatic Embryogenesis in Plants

Somatic embryogenesis (SE) serves as a key biological model for studying cell totipotency and the ontogenic processes of zygotic embryogenesis in plants. The SE process, under in vitro conditions, can be induced from different sources of explant cultivated in a culture medium with plant growth regulators (PGR) or by subjecting tissues to abiotic stress treatments. Somatic embryogenesis, in plant tissue culture (PTC), is a multifactorial event. The use of PGR, particularly auxins, is an important factor during induction. However, in vitro abiotic stress treatments are physiologically, biochemically, and genetically relevant and should be further studied.

Peroxidase Enzyme Fractions as Markers of Somatic Embryogenesis Capacities in Olive (Olea europaea L.)

As part of the search for biochemical markers of somatic embryogenesis in tissue cultures of olive (Olea europaea L.), peroxidases (POXs) in both the soluble and ionically wall-bound fractions were studied in two reputed olive cultivars (cvs.): "Picholine Marocaine" and "Dahbia". In order to carry out embryogenesis induction, proximal cotyledons were cultured in modified olive medium (OMc) supplemented with 25 μM indole-3-butylic acid (IBA) and 2.5 μM 2-isopentenyladenine (2iP), while distal leaf fragments (somatic explants) were cultured in OMc supplemented with 4.56 µM zeatin riboside (ZR) and 10.25 µM 1-naphthaleneacetic acid (NAA). Regarding embryogenic potentials, the zygotic explants (cv. Picholine Marocaine: 43.39%; cv. Dahbia: 53.41%) were more regenerative than the somatic explants (cv. Picholine Marocaine: 13.05%; cv. Dahbia: 19.51%). The enzyme assay showed a higher POX activity in embryogenic calluses (ECs) than in nonembryogenic calluses (NECs) for the zygotic explants in both studied cultivars. When expressed as units per milligram of proteins (U mg^-1 proteins), the highest total POXs activities (soluble POXs + ionically wall-bound POXs) were found in the ECs derived from the zygotic explants; for cv. Dahbia, 65% of the enzyme activities came from the ionically wall-bound fractions. Polyacrylamide gel electrophoresis showed that the ECs of the highly active cv. Dahbia were characterized by highly active isoperoxidases that were revealed in four migration zones, particularly a doublet in the A4 zone (R_f 0.70-0.73) present in the ionically wall-bound POXs. The fast-moving anodic POXs of the ionically wall-bound fractions could be adopted as an early electrophoretic test to determine the embryogenesis capacities in olive tissue culture materials. As biochemical markers, the POX enzyme and its profile in fractions, i.e., as soluble POXs and ionically wall-bound POXs, can offer a valuable tool for improving the tissue culture of olive via somatic embryogenesis.

Somatic Embryogenesis in Olive

The olive is a fruit tree species economically very important in countries of the Mediterranean basin. Somatic embryogenesis is a powerful in vitro technique with multiple uses in different fields, including breeding programs performed by both classical and innovative procedures. Thus, somatic embryogenesis enables the application of biotechnological methods such as genetic transformation, somaclonal variation, somatic hybridization, germplasm cryopreservation, in vitro mutagenesis or in vitro selection. This editorial paper presents a special issue focused on “Somatic embryogenesis in olive”. In this manuscript, the conceptual framework of the special issue is established and the contributions are summarized and put into context. Finally, the main bottlenecks limiting the practical applicability of somatic embryogenesis in this species are identified and the future research prospects are discussed.

Secondary Somatic Embryogenesis in Centaurium erythraea Rafn

Somatic embryogenesis (SE) is a developmental process during which plant somatic cells, under suitable conditions, produce embryogenic cells that develop into somatic embryos (se). SE is the most important method for plant propagation in vitro, having both fundamental and applicative significance. SE can be induced from different tissues and organs, but when se are used as explants, the process is recognized as secondary or cyclic SE. We induced secondary SE in Centaurium erythraea by application of 2,4-dichlorophenoxyacetic acid (2,4-D) and N-(2-chloro-4-pyridyl)-N′-phenylurea (CPPU). A medium containing 0.1 mgL⁻¹ 2,4-D and 0.25 mgL⁻¹ CPPU was optimal in terms of the number of primary SE explants forming se, the number of well-developed se per explant, and morphological appearance of the obtained se. These concentrations allowed SE to progress through three cycles, whereas at higher concentrations of 0.2 mgL⁻¹ 2,4-D and 0.5 mgL⁻¹ CPPU, only two cycles were achieved. Histological analysis revealed that secondary se are formed both directly and indirectly. Secondary SE readily germinated and converted into plantlets. Induction of cyclic SE contributes to the conservation efforts of this endangered medicinal plant and expands the spectrum of in vitro developmental pathways described in centaury—an emerging model in developmental biology.

Pinus spp. Somatic Embryo Conversion under High Temperature: Effect on the Morphological and Physiological Characteristics of Plantlets

Climatic variations in the current environmental scenario require plants with tolerance to sudden changes in temperature and a decrease in water availability. Accordingly, this tolerance will enable successful plantations and the maintenance of natural and planted forests. Consequently, in the last two decades, drought tolerance and high temperatures in conifers have been an important target for morphological, physiological, and epigenetic studies. Based on this, our research team has optimized different stages of somatic embryogenesis (SE) in Pinus spp. improving the success of the process. Through this method, we can obtain a large amount of clonal material and then analyze the somatic plants under different conditions ex vitro. The analysis of the morphological and physiological parameters in somatic embryos (ses) and plants with different tolerances to abiotic stress can provide us with valuable information about the mechanisms used by plants to survive under adverse environmental conditions. Thus, the objective of this work was to evaluate the influence of high temperatures (23, 40, 50, and 60 °C, after 12 weeks, 90, 30, 5 min, respectively) on the morphology of somatic embryos obtained from Pinus radiata D.Don (Radiata pine) and Pinus halepensis Mill. (Aleppo pine). In addition, we carried out a physiological evaluation of the somatic plants of P. radiata submitted to heat and water stress in a greenhouse. We observed that the number of somatic embryos was not affected by maturation temperatures in both species. Likewise, P. radiata plants obtained from these somatic embryos survived drought and heat stress in the greenhouse. In addition, plants originating from embryonal masses (EMs) subjected to high maturation temperature (40 and 60 °C) had a significant increase in gs and E. Therefore, it is possible to modulate the characteristics of somatic plants produced by the manipulation of environmental conditions during the process of SE.

Maturation and Conversion of Somatic Embryos Derived from Seeds of Olive (Olea europaea L.) cv. Dahbia: Occurrence of Secondary Embryogenesis and Adventitious Bud Formation

Maturation and conversion of somatic embryos are two crucial steps that hamper the development of efficient somatic embryogenesis systems in olive. Herein, a simple and efficient protocol for the maturation and conversion of olive somatic embryos is reported. Globular somatic embryos derived from seeds of cv. Dahbia were cultured on either half-strength olive (OM) or olive cyclic embryogenesis (ECO) media, with and without plant growth regulators (PGRs). The embryos reached the cotyledonary stage in 9 weeks, but those cultured on ECO medium containing 0.1 mg·L⁻¹ 6-(dimethylallylamino)purine (2iP), 0.1 mg·L⁻¹ 6-benzyladenine (BA) and 0.05 mg·L⁻¹ indole-3-butyric acid (IBA) exhibited the largest sizes, with an average of 4.7 mm. Somatic embryo conversion into plantlets was evaluated using different culture media (half-strength OM or one-third strength Murashige and Skoog (MS)), light conditions (light or dark) and desiccation pretreatments. The highest rate of somatic embryo conversion (45%) was observed under a 16 h photoperiod on half strength OM medium containing 0.1 mg·L⁻¹ gibberellic acid (GA₃) and 0.1 mg·L⁻¹ 1-naphthalene acetic acid (NAA). The embryos that failed to germinate showed either necrosis, cotyledon greening with no further conversion, adventitious bud formation or secondary embryogenesis. The findings of this study will be beneficial for biotechnological applications in olive.