Application of Superabsorbent Spacer Fabrics as Exuding Wound Dressing

Electrochemical sensing fibers for wearable health monitoring devices

Real-time monitoring of health conditions is an emerging strong issue in health care, internet information, and other strongly evolving areas. Wearable electronics are versatile platforms for non-invasive sensing. Among a variety of wearable device principles, fiber electronics represent cutting-edge development of flexible electronics. Enabled by electrochemical sensing, fiber electronics have found a wide range of applications, providing new opportunities for real-time monitoring of health conditions by daily wearing, and electrochemical fiber sensors as explored in the present report are a promising emerging field. In consideration of the key challenges and corresponding solutions for electrochemical sensing fibers, we offer here a timely and comprehensive review. We discuss the principles and advantages of electrochemical sensing fibers and fabrics. Our review also highlights the importance of electrochemical sensing fibers in the fabrication of "smart" fabric designs, focusing on strategies to address key issues in fiber-based electrochemical sensors, and we provide an overview of smart clothing systems and their cutting-edge applications in therapeutic care. Our report offers a comprehensive overview of current developments in electrochemical sensing fibers to researchers in the fields of wearables, flexible electronics, and electrochemical sensing, stimulating forthcoming development of next-generation "smart" fabrics-based electrochemical sensing.

Functional electrospun nanofibers: fabrication, properties, and applications in wound-healing process

Electrostatic spinning as a technique for producing nanoscale fibers has recently attracted increasing attention due to its simplicity, versatility, and loadability. Nanofibers prepared by electrostatic spinning have been widely studied, especially in biomedical applications, because of their high specific surface area, high porosity, easy size control, and easy surface functionalization. Wound healing is a highly complex and dynamic process that is a crucial step in the body's healing process to recover from tissue injury or other forms of damage. Single-component nanofibers are more or less limited in terms of structural properties and do not fully satisfy various needs of the materials. This review aims to provide an in-depth analysis of the literature on the use of electrostatically spun nanofibers to promote wound healing, to overview the infinite possibilities for researchers to tap into their biomedical applications through functional composite modification of nanofibers for advanced and multifunctional materials, and to propose directions and perspectives for future research.

Diffusion-Limited Processes in Hydrogels with Chosen Applications from Drug Delivery to Electronic Components

Diffusion is one of the key nature processes which plays an important role in respiration, digestion, and nutrient transport in cells. In this regard, the present article aims to review various diffusion approaches used to fabricate different functional materials based on hydrogels, unique examples of materials that control diffusion. They have found applications in fields such as drug encapsulation and delivery, nutrient delivery in agriculture, developing materials for regenerative medicine, and creating stimuli-responsive materials in soft robotics and microrobotics. In addition, mechanisms of release and drug diffusion kinetics as key tools for material design are discussed.

High porosity PEG-based hydrogel foams with self-tuning moisture balance as chronic wound dressings

A major challenge in chronic wound treatment is maintaining an appropriate wound moisture balance throughout the healing process. Wound dehydration hinders wound healing due to impeded molecule transport and cell migration with associated tissue necrosis. In contrast, wounds that produce excess fluid contain high levels of reactive oxygen species and matrix metalloproteases that impede cell recruitment, extracellular matrix reconstruction, and angiogenesis. Dressings are currently selected based on the relative amount of wound exudate with no universal dressing available that can maintain appropriate wound moisture balance to enhance healing. This work aimed to develop a high porosity poly(ethylene glycol) diacrylate hydrogel foam that can both rapidly remove exudate and provide self-tuning moisture control to prevent wound dehydration. A custom foaming device was used to vary hydrogel foam porosity from 25% to 75% by adjusting the initial air-to-solution volume ratio. Hydrogel foams demonstrated substantial improvements in water uptake volume and rate as compared to bulk hydrogels while maintaining similar hydration benefits with slow dehydration rates. The hydrogel foam with the highest porosity (~75%) demonstrated the greatest water uptake and rate, which outperformed commercial dressing products, Curafoam® and Silvercel®, in water absorption, moisture retention, and exudate management. Investigation of the water vapor transmission rates of each dressing at varied hydration levels was characterized and demonstrated the dynamic moisture-controlling capability of the hydrogel foam dressing. Overall, the self-tuning moisture control of this hydrogel foam dressing holds great promise to improve healing outcomes for both dry and exudative chronic wounds.

Breathable, antifreezing, mechanically skin-like hydrogel textile wound dressings with dual antibacterial mechanisms

Hydrogels are emerging as the most promising dressings due to their excellent biocompatibility, extracellular matrix mimicking structure, and drug loading ability. However, existing hydrogel dressings exhibit limited breathability, poor environmental adaptability, potential drug resistance, and limited drug options, which extremely restrict their therapeutic effect and working scenarios. Here, the current research introduces the first paradigm of hydrogel textile dressings based on novel gelatin glycerin hydrogel (glyhydrogel) fibers fabricated by the Hofmeister effect based wet spinning. Benefiting from the unique knitted structure, the textile dressing features excellent breathability (1800 times that of the commercially available 3 M dressing) and stretchability (535.51 ± 38.66%). Furthermore, the glyhydrogel textile dressing can also withstand the extreme temperature of −80 °C, showing the potential for application in subzero environments. Moreover, the introduction of glycerin endows the textile dressing with remarkable antibacterial property and expands the selection of loaded drugs (e.g., clindamycin). The prepared glyhydrogel textile dressing shows an excellent infected wound healing effect with a complete rat skin closure within 14 days. All these functions have not been achievable by traditional hydrogel dressings and provide a new approach for the development of hydrogel dressings.

•

A brand-new dressing, hydrogel textile, has been fabricated for the first time with unprecedented breathability.

•

An innovative preparation process for hydrogel fiber has been proposed for the first time.

•

More outstanding glyhydrogel textile dressing has been created to show extremely low-temperature resistance.

•

Dual mechanisms of antibiotic-free glycerin and lipophilic antibiotics provide a powerful antibacterial treatment.

A Self-Pumping Dressing with Multiple Liquid Transport Channels for Wound Microclimate Management

A microclimate with ventilation and proper wettability near the wound is vital for wound healing. In the case of pressure or absorption of large amounts of wound exudate, maintaining air circulation around the wound is currently a challenge for wound dressings. In this study, a novel self-pumping dressing (FAED) with multiple liquid transport channels is designed by combining a 3D spacer fabric, sodium alginate aerogel, and electrospun membrane. This unique structural design allows FAED to unidirectionally rapidly remove excess biofluid from the wound and transfer it through a special liquid transport channel to a liquid storage layer with a high absorption ratio. Importantly, the air circulation layer of FAED composed of liquid transport channels and spacer yarns provides excellent air permeability in both the horizontal (12.3 L min^-1 ) and vertical (272.02 mm s^-1 ) directions. Additionally, a lower compression modulus (0.14 MPa) and higher compression strength (0.15 MPa) enable the novel dressing to adapt to body contours and provide good supporting performance, as compared to foam dressings. Combined with its high biocompatibility, this unique dressing has significant potential for wound treatment and intensive care.

Investigating the microbial and metalloprotease sequestration properties of superabsorbent wound dressings

Exudate production is a natural part of the wound healing process, however levels of exudate need to be appropriately managed to maintain a moist wound environment which supports healing. An overly-exuding wound creates an environment favourable to bacterial growth. In recent years, a significant increase in commercially available superabsorbent dressings have become available which claim to absorb and retain excess exudate and its components. However, the effectiveness of these dressings in sequestering and retaining bacteria and host-derived proteins has not been compared. We have therefore investigated several superabsorbent dressings for their ability to absorb and retain bacteria (Staphylococcus aureus and Pseudomonas aeruginosa), their impact on bacterial viability, and their ability to sequester matrix metalloproteinases (MMP)-2 and 9 over 7 days. Whilst all dressings could sequester bacteria, some dressings internalised bacteria more effectively. There was considerable variation in bacterial viability within the dressings’ core, as well as differences in bacterial retention. Some dressings effectively internalised and retained bacteria over time, whereas other dressings retained significantly less. These differences were reflected visually using scanning electron microscopy. Most dressings fully sequestered MMP-2 and 9. These data illustrate differences in the ability of superabsorbent dressings to absorb and retain exudate and its components.

Mechanical and Thermal Behaviours of Weft-Knitted Spacer Fabric Structure with Inlays for Insole Applications

Insoles provide resistance to ground reaction forces and comfort during walking. In this study, a novel weft-knitted spacer fabric structure with inlays for insoles is proposed which not only absorbs shock and resists pressure, but also allows heat dissipation for enhanced thermal comfort. The results show that the inlay density and spacer yarn increase compression resistance and reduce impact forces. The increased spacer yarn density provides better air permeability but reduces thermal resistance, while a lower inlay density with a random orientation reduces the evaporative resistance. The proposed structure has significantly positive implications for insole applications.

Superabsorbent charcoal dressing versus silver foam dressing in wound area reduction: a randomised controlled trial

AIM

This study aimed to compare the effect of a novel sterile polyacrylate wound pad with activated carbon cloth treatment with a standard non-adhesive hydrocellular foam dressing with silver in reducing wound area.

METHOD

A multicentre randomised controlled open-label wound-dressing trial was conducted in two wound care outpatient clinics in western Switzerland from November 2018 to March 2020.

RESULTS

A total of 77 successive patients were randomised to receive either a sterile polyacrylate wound pad with activated carbon cloth treatment (n=38) or the standard non-adhesive hydrocellular foam dressing with silver (n=39). Reduction in wound area was the primary outcome, whereas the application period of the dressing, odour, maceration and pain were the secondary outcomes. Wound area was measured at baseline and during each wound dressing change until the dressings were no longer indicated. Wound area reduced faster in the intervention group than in the control group (0.45cm² per day vs. 0.2cm² per day), although the application period was longer in the intervention group compared with the control group (9.5 days vs. 8.1 days). Maceration reduction was more pronounced in the intervention group (-2.07cm²) than in the control group (-0.71cm²). Odour, pain and infection were similar in both groups.

CONCLUSION

Sterile polyacrylate wound pad dressings with activated carbon cloth reduced the wound area, as well as the maceration area, faster than the non-adhesive hydrocellular foam dressing with silver.

Effect of Silicone Inlaid Materials on Reinforcing Compressive Strength of Weft-Knitted Spacer Fabric for Cushioning Applications

Spacer fabrics are commonly used as cushioning materials. They can be reinforced by using a knitting method to inlay materials into the connective layer which reinforces the structure of the fabric. The compression properties of three samples that were fabricated by inlaying three different types of silicone-based elastic tubes and one sample without inlaid material have been investigated. The mechanical properties of the elastic tubes were evaluated and their relationship to the compression properties of the inlaid spacer fabrics was analysed. The compression behaviour of the spacer fabrics at an initial compressive strain of 10% is not affected by the presence of the inlaid tubes. The Young’s modulus of the inlaid tubes shows a correlation with fabric compression. Amongst the inlaid fabric samples, the spacer fabric inlaid with highly elastic silicone foam tubes can absorb more compression energy, while that inlaid with silicone tubes of higher tensile strength has higher compressive stiffness.

Development of polyurethane foam dressing containing silver and asiaticoside for healing of dermal wound

Polyurethane foam dressings for dermal wounds were formulated with natural polyols in order to improve the foam characteristics and the release of 2 active agents, silver and asiaticoside (AS) as an antimicrobial agent and an herbal wound healing agent, respectively. The foam was instantly formed by interaction of polyols and diisocyanate. Hydroxypropyl methylcellulose, chitosan and sodium alginate were individually mixed with the main polyols, polypropylene glycol, in the formulation while the active components were impregnated into the obtained foam dressing sheets. Although the type and amount of the natural polyols slightly affected the pore size, water sorption-desorption profile and compression strength of the obtained foam sheets, a prominent effect was found in the release of both active components. Among natural polyols formulations, foam sheets with alginate showed the highest silver and AS release. Non-cytotoxicity of these foam sheets to human fibroblast cells was confirmed. Antimicrobial testing on four bacteria strains showed that 1 mg/cm2 silver in formulations with 6% of natural polyols and without natural polyols had sufficient content of the silver release with comparable inhibition zone and significantly larger zone than other formulations. In pig study, the foam dressing with 6% alginate, 1 mg/cm2 silver and 5% AS could improve wound healing in both the percentage of the wound closure and histological parameters of the dermal wound without any dermatologic reactions. In conclusion, this innovative foam dressing had potential to be a good candidate for wound treatment.