Plant Secondary Metabolite-Derived Polymers: A Potential Approach to Develop Antimicrobial Films

Identification of Biomarkers Associated with Phyllosticta citricarpa Tolerance

Citrus black spot (CBS) is a fungal disease caused by Phyllosticta citricarpa Kiely, (McAlpine Van der Aa), with most cultivars being susceptible to infection. Currently, disease control is based on the application of protective fungicides, which is restricted due to resistance, health and environmental concerns. Although using natural products for disease management is gaining momentum, more advances are required. This study obtained the metabolic profiles of the essential oil and cuticular waxes of two citrus cultivars with a varying susceptibility to CBS infection using gas chromatography-mass spectrometry. A multivariate data analysis identified possible biomarker compounds that contributed to the difference in susceptibility between the two cultivars. Several identified biomarkers were tested in vitro for their antifungal properties against P. citricarpa. Two biomarkers, propanoic acid and linalool, were able to completely inhibit pathogen growth at 750 mg/L and 2000 mg/L, respectively.

Phytochemical Characterization, Antioxidant, and Anti-Proliferative Activities of Wild and Cultivated Nigella damascena Species Collected in Sicily (Italy)

The use of Nigella damascena seeds in the culinary field or as aerial parts infusions in the pharmaceutical and cosmetic fields is widely reported. The biological activity of this plant, as demonstrated over the years, is closely related to its phytochemical content. This investigation focused on the comparative study of the same plants of N. damascena, one totally wild (WND), while the other two, one with white flowers (CWND) and the other with blue flowers (CBND), were subject to cultivation, irrigation, and manual weeding. Using the potential of 1D and 2D-NMR spectroscopy, coupled with MS/MS spectrometric studies, the three methanolic extracts of N. damascena were investigated. Chemical studies have highlighted the presence of triterpene saponin compounds and various glycosylated flavonoids. Finally, the in vitro antiproliferative and antioxidant activities of the three individual extracts were evaluated. The antiproliferative activity performed on U-937, HL-60, and MCF-7 tumor cell lines highlighted a greater anticancer effect of the CBND and CWND extracts compared to the data obtained using WND. The antioxidant activity, however, performed to quantify ROS generation is comparable among the extracts used.

Enhanced Antimicrobial Activity through Synergistic Effects of Cold Atmospheric Plasma and Plant Secondary Metabolites: Opportunities and Challenges

The emergence of antibiotic resistant microorganisms possesses a great threat to human health and the environment. Considering the exponential increase in the spread of antibiotic resistant microorganisms, it would be prudent to consider the use of alternative antimicrobial agents or therapies. Only a sustainable, sustained, determined, and coordinated international effort will provide the solutions needed for the future. Plant secondary metabolites show bactericidal and bacteriostatic activity similar to that of conventional antibiotics. However, to effectively eliminate infection, secondary metabolites may need to be activated by heat treatment or combined with other therapies. Cold atmospheric plasma therapy is yet another novel approach that has proven antimicrobial effects. In this review, we explore the physiochemical mechanisms that may give rise to the improved antimicrobial activity of secondary metabolites when combined with cold atmospheric plasma therapy.

Bactericidal Properties of Low-Density Polyethylene (LDPE) Modified with Commercial Additives Used for Food Protection in the Food Industry

This study investigated the influence of commercially available food preservatives: Natamax® (containing natamycin) and Nisaplin® (containing nisin) on the antimicrobial properties of LDPE film, commonly used for food packaging. Studies have shown that the addition of 3% Natamax® or, alternatively, the addition of 5% Nisaplin® provides an LDPE film with effective antimicrobial protection. The applied biocides did not significantly affect the strength and rheological properties of LDPE. However, differences in optical properties were observed. The transparency of the samples decreased slightly with the addition of 3% or 5% Natamax® (by approx. 1% and 3%, respectively). A significant change was observed in the film haze, the addition of 5% Natamax® increased this parameter by approx. 80%, while 5% Nisaplin® increased it by approx. 19%. Both Natamax® and Nisaplin® agents can be successfully used to manufacture food packaging materials with antimicrobial protection. Natamax® showed a stronger bactericidal effect, while Nisaplin® changed other properties less significantly.

Potential of plant secondary metabolite-based polymers to enhance wound healing

There is a global epidemic of non-healing wounds. Chronic inflammation, overexpression of pro-inflammatory cytokines, oxidative stress and bacterial infection are implicated in delayed wound healing. Natural extracts are a rich source of bioactive molecules called plant secondary metabolites (PSMs) that include terpenes and phenols. These molecules may facilitate wound healing through their antioxidant, anti-inflammatory, and antibacterial activity. After briefly outlining the process of wound healing and how it is compromised in chronic wounds, this review focuses on investigating how PSMs-based polymers may improve wound healing. Best methods for incorporating PSMs into wound dressings are reviewed and critically compared. The exiting body of literature strongly suggests that PSMs-based polymers incorporated into wound dressings could have clinical value in aiding wound healing. STATEMENT OF SIGNIFICANCE: Chronic wounds develop by the persistence of inflammation, oxidative stress and infection. Chronic wounds affect the worldwide population, by reducing quality of life of patients with significant cost to healthcare systems. To help chronic wounds to heal and overcome this burden, materials with anti-inflammatory, antioxidant and antibacterial properties are required. Plant secondary metabolites (PSMs) are volatile materials that have all these properties. PSMs-based polymers can be fabricated by polymerization techniques. The present review provides an overview of the state-of-the-art of the wound healing mechanisms of PSMs. Current developments in the field of PSMs-based polymers are reviewed and their potential use as wound dressings is also covered.

Inhibition and disintegration of Bacillus subtilis biofilm with small molecule inhibitors identified through virtual screening for targeting TasA(28-261), the major protein component of ECM

Microbial biofilms have been recognized for a vital role in antibiotic resistance and chronic microbial infections for 2-3 decades; still, there are no 'anti-biofilm drugs' available for human applications. There is an urgent need to develop novel 'anti-biofilms' therapeutics to manage biofilm-associated infectious diseases. Several reports have suggested that targeting molecules involved in quorum sensing or biofilm-specific transcription may inhibit biofilm formation. However, the possibility of targeting other vital components of microbial biofilms, especially the extracellular matrix (ECM) components, has remained largely unexplored. Here we report targeting TasA_(28-261), the major proteinaceous component of Bacillus subtilis ECM with two small molecule inhibitors (lovastatin and simvastatin) identified through virtual screening and drug repurposing, resulted in complete inhibition of biofilm. In molecular docking and dynamics simulation studies, lovastatin was observed to make stable interactions with TasA_(28-261), whereas the simvastatin - TasA_(28-261) interactions were relatively less stable. However, in subsequent in vitro studies, both lovastatin and simvastatin successfully inhibited B. subtilis biofilm formation at MIC values of < 10 µg/ml. Besides, these potential inhibitors also caused the disintegration of pre-formed biofilms. Results presented here provide 'proof of concept' for the hypothesis that targeting the extracellular matrix's vital component(s) could be one of the most efficient approaches for inhibiting microbial biofilms and disintegrating the pre-formed biofilms. We propose that a similar approach targeting ECM-associated proteins with FDA-approved drugs could be implemented to develop novel anti-biofilm therapeutic strategies against biofilm-forming chronic microbial pathogens.Communicated by Ramaswamy H. Sarma.

Antibacterial and Anticancer Potentials of Presynthesized Photosensitive Plectranthus cylindraceus Oil/TiO2/Polyethylene Glycol Polymeric Bionanocomposite

The present study is concerned with the fabrication of the bifunctional Plectranthus cylindraceus oil/TiO2/polyethylene glycol polymeric film for antibacterial and anticancer activities. The suggested film is based on the utility of naturally extracted P. cylindraceus oil in the formation of the polymeric bionanocomposite film decorated with TiO2 nanoparticles. The bionanocomposite film was fabricated by incorporating 15 w% of P. cylindraceus oil with 10 w% polyethylene glycol and 5 w% TiO2 nanoparticles. The active components of P. cylindraceus oil were verified using gas chromatography coupled with mass spectrometry (GC-MS). The surface morphology of the resulted bionanocomposite film was characterized by various spectroscopic and microscopic techniques. The antibacterial potential of the fabricated bionanocomposite film was investigated against four pathogenic strains. The obtained results revealed excellent sensitivity against the bacterial strains, particularly E. coli and S. aureus, with minimum inhibitory concentration 320 µg mL-1 and minimum bactericidal concentration 640 and 1280 µg mL-1 for E. coli and S. aureus, respectively. Polymeric bionanocomposite exerted significant cytotoxicity against human lung carcinoma cell lines in a concentration-dependent manner with an IC50 value of 42.7 ± 0.25 μg mL-1. Safety assessment test against peripheral blood mononuclear cells (PBMCs) demonstrated that the bionanocomposite is nontoxic in nature. Bionanocomposite also showed potent photocatalytic effects. Overall, the results concluded that the bionanocomposite has expressed scope for multifaceted biomedical applications.

Horseradish Essential Oil as a Promising Anti-Algal Product for Prevention of Phytoplankton Proliferation and Biofouling

Increased proliferation of algae is a current problem in natural and artificial water bodies. Controlling nutrients is the most sustainable treatment of increased algal proliferation, however in certain cases, it is not sufficiently available, or it does not provide results fast enough. Chemicals derived from natural sources, which could be effective in low concentrations and are biodegradable, may have an advantage over conventional chemical treatments. The main aim of the present study was to investigate the anti-cyanobacterial and anti-algal properties of allyl-isothiocyanate-containing essential oil produced from horseradish roots with a complex approach of the topic: on laboratory strains of cyanobacteria and eukaryotic algae, on microcosms containing natural phytoplankton assemblages, and on semi-natural biofilms. The results show that acute treatment can significantly reduce the viability of all the tested cyanobacteria and eukaryotic algae. Results of microcosm experiments with natural phytoplankton assemblages show that horseradish essential oil from 7.1 × 10⁻⁶% (v/v) is applicable to push back phytoplankton proliferation even in natural assemblages. The individual number in the biofilm was dropped down to one-fifth of the original individual number, so 7.1 × 10⁻⁶% (v/v) and higher concentration of the essential oil can be considered as a successful treatment against biofouling.

Assessing the efficiency of essential oil and active compounds/poly (lactic acid) microcapsules against common foodborne pathogens

Essential oils' active compounds present great potential as a bactericidal agent in active packaging. The encapsulation in polymeric walls promotes their protection against external agents besides allowing controlled release. This work produced PLA capsules with three different active compounds, Cinnamomum cassia essential oil (CEO), eugenol (EEO), and linalool (LEO), by emulsion solvent evaporation method. Characterizations included SEM, Zeta potential, FTIR, TGA, and bactericidal activity against E. coli, S. aureus, L. monocytogenes, and Salmonella. The active compounds showed microbiological activity against all pathogens. CEO capsules showed superior colloidal stability. The active compounds' presence in all capsules was confirmed by FTIR analysis, with possible physical interaction between CEO, EEO, and the polymeric matrix, while LEO had a possible chemical interaction with PLA. TGA analysis showed a plasticizing effect of active compounds, and the loading efficiency was 39.7%, 50.7%, and 22.3% for CEO-PLA, EEO-PLA, and LEO-PLA, respectively. The capsules presented two release stages, sustaining activity against pathogens for up to 28 days, indicating a satisfactory internal morphology. This study presented methodology for encapsulation of antimicrobial compounds that can be suitable for active food packaging. CEO-PLA capsules regarding stability and antibacterial activity achieved the best results.

Emerging nanomaterials for antibacterial textile fabrication

In recent times, the search for innovative material to fabricate smart textiles has been increasing to satisfy the expectation and needs of the consumers, as the textile material plays a key role in the evolution of human culture. Further, the textile materials provide an excellent environment for the microbes to grow, because of their large surface area and ability to retain moisture. In addition, the growth of harmful bacteria on the textile material not only damages them but also leads to intolerable foul odour and significant danger to public health. In particular, the pathogenic bacteria present in the fabric surface can cause severe skin infections such as skin allergy and irritation via direct human contact and even can lead to heart problems and pneumonia in certain cases. Recently, nanoparticles and nanomaterials play a significant role in textile industries for developing functional smart textiles with self-cleaning, UV-protection, insect repellent, waterproof, anti-static, flame-resistant and antimicrobial-resistant properties. Thus, this review is an overview of various textile fibres that favour bacterial growth and potential antibacterial nanoparticles that can inhibit the growth of bacteria on fabric surfaces. In addition, the probable antibacterial mechanism of nanoparticles and the significance of the fabric surface modification and fabric finishes in improving the long-term antibacterial efficacy of nanoparticle-coated fabrics were also discussed.

Antibacterial effect of essential oils of two plants Eucalyptus camaldulensis and Artemisia herba alba on some bacterial strains

Essential oils are secondary plant metabolites and have many therapeutic properties. The aim of our study is to determine the antibacterial effect of the essential oils of two plants cultivated in a semi-arid region located in the Northeast of Algeria (Tebessa), Eucalyptus camaldulensis (Myrtaceae) and Artemisia herba alba (Asteraceae). The yield of essential oils of the two plants were 1.45 ± 0.026 and 1.21 ± 0.061 g/100 g of the dry matter of the aerial part respectively. The test of the antibacterial effect is based on the diffusion method on solid medium (sensitivity), this method allows us to determine the susceptibility or resistance of an organism vis-à-vis the sample studied. Our study reveals that E. camaldulensis essential oil had very strong activity on all bacterial strains tested, except on Pseudomonas aeruginosa and Enterococcus faecalis for which there was no inhibitory effect. However, A. herba alba essential oil had very strong activity on all bacterial strains tested except on Pseudomonas aeruginosa. The MIC of Artemisia essential oil ranged between 0.08 and 1.57 µL/mL, with the lowest activity for S. aureus and P. mirabilis (1.57 µL/mL) and the highest activity was observed against E. feacalis, E. coli, and K. pneumonia (0.09 µL/mL). The MIC of the second plant EO ranged between 0.08 and 0.36 µL/mL, with the lowest activity for P. mirabilis (0.36 µL/mL) and the highest one was observed against S. saprophyticus and E. coli (0.08 µL/mL). Statistical analysis shows that the two plants have the same efficacy against S. saprophyticus while E. faecalis, K. pneumoniae and P. mirabilis species are affected more by the essential oil of A. herba alba. While, E. camaldulensis has a higher efficiency than that of A. herba alba on the species: S. aureus and E. coli. Therefore, the essential oils of E. camaldulensis and A. herba alba suggests avenues for further non clinical and clinical studies.

Phytochemical Composition and In Vitro Biological Activity of Iris spp. (Iridaceae): A New Source of Bioactive Constituents for the Inhibition of Oral Bacterial Biofilms

The inhibition and eradication of oral biofilms is increasingly focused on the use of plant extracts as mouthwashes and toothpastes adjuvants. Here, we report on the chemical composition and the antibiofilm activity of 15 methanolic extracts of Iris species against both mono-(Pseudomonas aeruginosa, Staphylococcus aureus) and multi-species oral biofilms (Streptococcus gordonii, Veillonella parvula, Fusobacterium nucleatum subsp. nucleatum, and Actinomyces naeslundii). The phytochemical profiles of Iris pallida s.l., Iris versicolor L., Iris lactea Pall., Iris carthaliniae Fomin, and Iris germanica were determined by ultra-high performance liquid chromatography-high-resolution tandem mass spectroscopy (UHPLC-HRMS/MS) analysis, and a total of 180 compounds were identified among Iris species with (iso)flavonoid dominancy. I. pallida, I. versicolor, and I. germanica inhibited both the quorum sensing and adhesion during biofilm formation in a concentration-dependent manner. However, the extracts were less active against maturated biofilms. Of the five tested species, Iris pallida s.l. was the most effective at both inhibiting biofilm formation and disrupting existing biofilms, and the leaf extract exhibited the strongest inhibitory effect compared to the root and rhizome extracts. The cytotoxicity of the extracts was excluded in human fibroblasts. The inhibition of bacterial adhesion significantly correlated with myristic acid content, and quorum sensing inhibition correlated with the 7-β-hydroxystigmast-4-en-3-one content. These findings could be useful for establishing an effective tool for the control of oral biofilms and thus dental diseases.

Electrically Insulating Plasma Polymer/ZnO Composite Films

In this report, the electrical properties of plasma polymer films functionalized with ZnO nanoparticles were investigated with respect to their potential applications in biomaterials and microelectronics fields. The nanocomposite films were produced using a single-step method that combines simultaneous plasma polymerization of renewable geranium essential oil with thermal decomposition of zinc acetylacetonate Zn(acac)2. The input power used for the deposition of composites were 10 W and 50 W, and the resulting composite structures were abbreviated as Zn/Ge 10 W and Zn/Ge 50 W, respectively. The electrical properties of pristine polymers and Zn/polymer composite films were studied in metal-insulator-metal structures. At a quantity of ZnO of around ~1%, it was found that ZnO had a small influence on the capacitance and dielectric constants of thus-fabricated films. The dielectric constant of films with smaller-sized nanoparticles exhibited the highest value, whereas, with the increase in ZnO particle size, the dielectric constant decreases. The conductivity of the composites was calculated to be in the in the range of 10-14-10-15 Ω-1 m-1, significantly greater than that for the pristine polymer, the latter estimated to be in the range of 10-16-10-17 Ω-1 m-1.

New Polymeric Films with Antibacterial Activity Obtained by UV-induced Copolymerization of Acryloyloxyalkyltriethylammonium Salts with 2-Hydroethyl Methacrylate

New polymeric films with antibacterial activity have been prepared, by simple UV-induced copolymerization of readily available ω-(acryloyloxy)-N,N,N-triethylalcan-1-aminium bromides (or acryloyloxyalkyltriethylammonium bromides, AATEABs) with commercially available 2-hydroethyl methacrylate (HEMA), at different relative amounts. In particular, the antibacterial activity of polymeric films derived from 11-(acryloyloxy)-N,N,N-triethylundecan-1-aminium bromide (or acryloyloxyundecyltriethylammonium bromide, AUTEAB; bearing a C-11 alkyl chain linker between the acrylate polymerization function and the quaternary ammonium moiety) and 12-(acryloyloxy)-N,N,N-triethyldodecan-1-aminium bromide (or acryloyldodecyltriethylammonium bromide, ADTEB, bearing a C-12 alkyl chain linker) has been assessed against Gram-negative Escherichia Coli and Gram-positive Staphylococcus aureus cells. The results obtained have shown a clear concentration-dependent activity against both bacterial strains, the films obtained from homopolymerization of pure AUTEAB and ADTEAB being the most effective. Moreover, ADTEAB-based films showed a higher antibacterial activity with respect to the AUTEAB-based ones. Interestingly, however, both types of films presented a significant activity not only toward Gram-positive S. aureus, but also toward Gram-negative E. Coli cells.

Eco-friendly nanocomposites derived from geranium oil and zinc oxide in one step approach

Nanocomposites offer attractive and cost-effective thin layers with superior properties for antimicrobial, drug delivery and microelectronic applications. This work reports single-step plasma-enabled synthesis of polymer/zinc nanocomposite thin films via co-deposition of renewable geranium essential oil-derived polymer and zinc nanoparticles produced by thermal decomposition of zinc acetylacetonate. The chemical composition, surfaces characteristics and antimicrobial performance of the designed nanocomposite were systematically investigated. XPS survey proved the presence of ZnO in the matrix of formed polymers at 10 W and 50 W. SEM images verified that the average size of a ZnO nanoparticle slightly increased with an increase in the power of deposition, from approximately 60 nm at 10 W to approximately 80 nm at 50 W. Confocal scanning laser microscopy images showed that viability of S. aureus and E.coli cells significantly reduced on surfaces of ZnO/polymer composites compared to pristine polymers. SEM observations further demonstrated that bacterial cells incubated on Zn/Ge 10 W and Zn/Ge 50 W had deteriorated cell walls, compared to pristine polymers and glass control. The release of ZnO nanoparticles from the composite thin films was confirmed using ICP measurements, and can be further controlled by coating the film with a thin polymeric layer. These eco-friendly nanocomposite films could be employed as encapsulation coatings to protect relevant surfaces of medical devices from microbial adhesion and colonization.

Thinking Green: Sustainable Polymers from Renewable Resources

n/a