Creation of Superhydrophobic Poly(L-phenylalanine) Nonwovens by Electrospinning

Development of Adjustable High- to Low-Adhesive Superhydrophobicity Using Aligned Electrospun Fibers

Superhydrophobic surfaces based on electrospun fibrous structures exhibit advantages of additive manufacturing and enable the passage of gases. Compared to randomly deposited fibers, directionally aligned fibers improve the control of surface wetting by a specified fiber orientation and predictable liquid-fiber contact interface. In this article, we create superhydrophobicity with adjustable adhesion based on the understanding of droplet wetting behavior on directionally aligned fibers. Directionally aligned polystyrene fibers with different diameters and interfiber distances (l) are produced using electrospinning with a rotating fin collector. The wetting behavior of droplets on the surfaces dressed by aligned fibers is characterized, and a thermodynamic model of wetting behavior is established to guide the experimental studies. As a result, high-adhesive superhydrophobicity is achieved on weak hydrophobic substrate surfaces dressed by aligned polystyrene fibers with a diameter of 1.8 μm and l between 5 and 130 μm. Water droplets (2 μL) exhibit a maximum contact angle of 156° and adhere to the fiber-dressed surfaces by tilting upside down. Low-adhesive superhydrophobicity is achieved by introducing an additional layer of aligned fibers to increase the transition energy barrier. On the dual-layer structure with an upper-layer l of 9 μm, droplets show a contact angle of 155° and can readily roll off the surface. Moreover, increasing the upper-layer l to 15 μm reserves the surface to high-adhesive superhydrophobicity.

Facile Fabrication of Superhydrophobic and Flame-Retardant Coatings on Cotton Fabrics

The hydrophilicity and inherent flammability of cotton textiles severely limit their usage. To solve these drawbacks, a superhydrophobic and flame-retardant (SFR) coating made of chitosan (CH), ammonium polyphosphate (APP), and TiO₂-SiO₂-HMDS composite was applied to cotton fabric using simple layer-by-layer assembly and dip-coating procedures. First, the fabric was alternately immersed in CH and APP water dispersions, and then immersed in TiO₂-SiO₂-HMDS composite to form a CH/APP@TiO₂-SiO₂-HMDS coating on the cotton fabric surface. SEM, EDS, and FTIR were used to analyze the surface morphology, element composition, and functional groups of the cotton fabric, respectively. Vertical burning tests, microscale combustion calorimeter tests, and thermogravimetric analyses were used to evaluate the flammability, combustion behavior, thermal degradation characteristics, and flame-retardant mechanism of this system. When compared to the pristine cotton sample, the deposition of CH and APP enhanced the flame retardancy, residual char, heat release rate, and total heat release of the cotton textiles. The superhydrophobic test results showed that the maximal contact angle of SFR cotton fabric was 153.7°, and possessed excellent superhydrophobicity. Meanwhile, the superhydrophobicity is not lost after 10 laundering cycles or 50 friction cycles. In addition, the UPF value of CH/APP@TiO₂-SiO₂-HMDS cotton was 825.81, demonstrating excellent UV-shielding properties. Such a durable SFR fabric with a facile fabrication process exhibits potential applications for both oil/water separation and flame retardancy.

Hybrid Nanofibrous Composites with Anisotropic Mechanics and Architecture for Tendon/Ligament Repair and Regeneration

Rupture of tendons and ligaments (T/L) is a major clinical challenge due to T/L possess anisotropic mechanical properties and hierarchical structures. Here, to imitate these characteristics, an approach is presented by fabricating hybrid nanofibrous composites. First, hybrid fiber-reinforced yarns are fabricated via successively electrospinning poly(L-lactide-co-ε-caprolactone) (PLCL) and gelatin (Ge) nanofibers onto polyethylene terephthalate (PET) fibers to improve biodurability and biocompatibility. Then, by comparing different manufacturing methods, the knitted structure succeeds in simulating anisotropic mechanical properties, even being stronger than natural ligaments, and possessing comfort compliance superior to clinically used ligament advanced reinforcement system (LARS) ligament. Moreover, after inoculation with tendon-derived stem cells and transplantation in vivo, hybrid nanofibrous composites are integrated with native tendons to guide surrounding tissue ingrowth due to the highly interconnected and porous structure. The knitted hybrid nanofibrous composites are also ligamentized and remodeled in vivo to promote tendon regeneration. Specifically, after the use of optimized anisotropic hybrid nanofibrous composites to repair tendon, the deposition of tendon-associated extracellular matrix proteins is more significant. Thus, this study indicates a strategy of manufacturing anisotropic hybrid nanofibrous composites with superior mechanical properties and good histocompatibility for clinical reconstruction.

A Review on Electrospun Poly(amino acid) Nanofibers and Their Applications of Hemostasis and Wound Healing

The timely and effective control and repair of wound bleeding is a key research issue all over the world. From traditional compression hemostasis to a variety of new hemostatic methods, people have a more comprehensive understanding of the hemostatic mechanism and the structure and function of different types of wound dressings. Electrospun nanofibers stand out with nano size, high specific surface area, higher porosity, and a variety of complex structures. They are high-quality materials that can effectively promote wound hemostasis and wound healing because they can imitate the structural characteristics of the skin extracellular matrix (ECM) and support cell adhesion and angiogenesis. At the same time, combined with amino acid polymers with good biocompatibility not only has high compatibility with the human body but can also be combined with a variety of drugs to further improve the effect of wound hemostatic dressing. This paper summarizes the application of different amino acid electrospun wound dressings, analyzes the characteristics of different materials in preparation and application, and looks forward to the development of directions of poly(amino acid) electrospun dressings in hemostasis.

Peptide-Based Electrospun Fibers: Current Status and Emerging Developments

Electrospinning is a well-known, straightforward, and versatile technique, widely used for the preparation of fibers by electrifying a polymer solution. However, a high molecular weight is not essential for obtaining uniform electrospun fibers; in fact, the primary criterion to succeed is the presence of sufficient intermolecular interactions, which function similar to chain entanglements. Some small molecules able to self-assemble have been electrospun from solution into fibers and, among them, peptides containing both natural and non-natural amino acids are of particular relevance. Nowadays, the use of peptides for this purpose is at an early stage, but it is gaining more and more interest, and we are now witnessing the transition from basic research towards applications. Considering the novelty in the relevant processing, the aim of this review is to analyze the state of the art from the early 2000s on. Moreover, advantages and drawbacks in using peptides as the main or sole component for generating electrospun nanofibers will be discussed. Characterization techniques that are specifically targeted to the produced peptide fibers are presented.

Amphiphilic mPEG-Modified Oligo-Phenylalanine Nanoparticles Chemoenzymatically Synthesized via Papain

Amphiphilic mPEG-modified peptide nanoparticles were developed from oligo-phenylalanine (OPhe) nanoparticles (NPs) synthesized via papain. Tyndall effects indicate that OPhe NPs are amphiphobic. Addition of protein perturbants, sodium dodecyl sulfate (SDS), and urea, in the dispersion solution of OPhe NPs can significantly reduce the R _h,m value of NPs, from approximately 749.2 nm to about 200 nm. Therefore, the hydrophobic interaction and hydrogen bonding play major roles in maintaining the aggregation of OPhe NPs. Using the "grafting to" method, the methoxypolyethylene-modified OPhe NPs (mPEG-g-OPhe NPs) were synthesized and characterized by Fourier transform infrared spectroscopy (FTIR), ¹H NMR, electrospray ionization mass spectrometry (ESI-MS), and dynamic light scattering (DLS). The attenuated total reflectance (ATR) spectrum of OPhe NPs and mPEG-g-OPhe NPs demonstrate that the secondary structures of these NPs are mainly β-type. mPEG-g-OPhe NPs can self-aggregate into spherical micelles both in water and cyclohexane. Increasing the chain length of the mPEG moiety, the critical micellar concentrations of mPEG-g-OPhe NPs increased in water but decreased in cyclohexane. The light stability, thermal stability, hydrolysis stability, and encapsulation stability of curcumin were significantly promoted by encapsulation in the micelles formed by mPEG-g-OPhe NPs. The protective effects regularly varied with the variations in the mPEG chain length of mPEG-g-OPhe NPs.

Electrospinning and Post-Spun Chain Conformations of Synthetic, Hydrophobic Poly(α-amino acid)s

Electrospinning and post-spun conformations of hydrophobic poly(α-amino acid)s are described in this study. The poly(α-amino acid)s, poly(Gly), poly(l-Ala), poly(l-Val), and poly(l-Leu) were synthesized via corresponding N-carboxy-α-amino acid anhydrides. The average molecular weight and degree of polymerization of these polymers were determined by N-terminus labeling using 2,4-dinitrofluorobenzene and by viscometry in the case of poly(Gly). These poly(α-amino acid)s were electrospun from trifluoroacetic acid or trifluoroacetic acid/dichloromethane solutions. The FT-IR spectroscopy and wide-angle X-ray diffraction indicated that the electrospun poly(l-Ala) and poly(l-Leu) fibers predominantly adopts α-helical structure, whereas poly(l-Val) and poly(Gly) fibers exhibited mainly β-strand and random coil structures, respectively.