Synthesis of Nitrogen-Doped Lignin/DES Carbon Quantum Dots as a Fluorescent Probe for the Detection of Fe3+ Ions

State-of-the-art of lignin-derived carbon nanodots: Preparation, properties, and applications

Lignin-derived carbon nanodots (LCNs) are nanometer-scale carbon spheres fabricated from naturally abundant lignin. Owing to rich and highly heritable graphene like π-π conjugated structure of lignin, to fabricate LCNs from it not only endows LCNs with on-demand tunable size and optical features, but also further broadens the green and chemical engineering of carbon nanodots. Recently, they have become increasingly popular in sensing, bioimaging, catalysis, anti-counterfeiting, energy storage/conversion, and others. Despite the enormous research efforts put into the ongoing development of lignin value-added utilization, few commercial LCNs are available. To have a deeper understanding of this issue, critical impacts on the preparation, properties, and applications of state-of-the-art LCNs are carefully reviewed and discussed. A concise analysis of their unique advantages, limitations for specific applications, and current challenges and outlook is conducted. We hope that this review will stimulate further advances in the functional material-oriented production of lignin.

Hydrothermal synthesis of modified lignin-based carbon dots derived from biomass waste for fluorescence determination of valsartan

Recently, carbon dots (CDs) have been extensively investigated as potential tools for numerous applications. Modified lignin-based CDs have been synthesized and used in the field of drug detection. They were found to be highly selective and sensitive to valsartan (VAL). Using a simple hydrothermal method, phosphorus and chlorine co-doped CDs were synthesized using lignin extracted from date seeds. The fluorescence properties of the synthesized CDs are influenced by several factors, which were investigated in detail. The optimal synthesis conditions were 1.50 g of lignin, 18 mL of 2 M NaOH, 1 mM H3PO4, 3 mM HCl and the mixture was heated at 220 °C for 16 hours. The synthesized lignin-based CDs have excellent FL properties and are well soluble in water with reasonable stability. Characterization of the prepared CDs revealed that they have various functional groups with a graphene oxide-like structure. The developed CDs show a good quantum yield of 37.7%. The FL of the CDs is quenched by VAL at λ em 313 nm after λ ex at 275 nm by a combination of static and dynamic quenching mechanisms. The response of VAL was linear in the range of 4.0-100.0 μg mL-1. The detection and quantification limits of VAL were 1.23 and 3.71 μg mL-1, respectively. The nanoprobe was successfully used to analyze VAL in drug samples and provided satisfactory results.

Recent developments in lignin-based fluorescent materials

Biomass-based fluorescent materials are an alternative to plastic-based materials for their multifunctional applications. Lignin, an inexpensive and easily available raw material, demonstrates outstanding environment-responsive properties such as pH, metal ions, dyes sensing, bioimaging and so on. To date, only a little work has been reported on the synthesis of lignin-based fluorescent materials. In this review report, synthetic approaches and light-responsive applications of lignin-based fluorescent carbon dots and other materials are summarized. The results reveal that lignin-based fluorescent carbon dots are prepared by hydrothermal method, exhibit small size <10 nm, reveal significant quantum yield, biocompatibility, non-toxicity, photostability and display substantial tunable emission and can be efficiently employed for sensing, bioimaging and energy storage applications. Finally, the forthcoming challenges, investigations, and options open for the chemical and/or physical modification of lignin into fluorescent materials for future applications are well-addressed. To our knowledge, this is the first comprehensive review report on lignin-based fluorescent materials and their light-responsive applications. In addition, this review will attract remarkable consideration and thrust for the researchers and biochemical technologists working with the preparation of lignin-based fluorescent materials for broad applications.

Sustainable synthesis of lignin-derived carbon dots with visible pH response for Fe3+ detection and bioimaging

Synthesis of lignin-based carbon dots (LCDs) with high quantum yield (QY), stable fluorescence properties and biocompatibility has been a challenge. Here, we propose an improved two-step strategy for producing high-quality LCDs from enzymatic hydrolysis lignin (EHL). The p-aminobenzenesulfonic acid used in the strategy not only provides nitrogen and sulfur elements, but also tailors the disordered three-dimensional structure of EHL. The successful co-doping of N and S elements favors the reduction of the optical energy bandgap (Eg), resulting in a high QY of 45.05% for LCDs. The LCDs exhibited superior selectivity and sensitivity for Fe3+ with a limit of detection (LOD) of 0.15 μM when Fe3+ concentration was 50-500 μM. In addition, LCDs demonstrated significant fluorescence in HepG2 cells and HepG2 cells loaded with LCDs at a concentration of 80 μg/mL showed good viability, suggesting that they are suitable for in vivo applications. The luminescent centers of LCDs change during pH regulation and thus show a special visual response to pH changes, making them have great potential for detecting metabolism in living cells. This work provides a novel and low-cost method for fabricating sustainable fluorescent probes for chemical sensing and bioimaging.

Lignocellulosic Biomass-Based Carbon Dots: Synthesis Processes, Properties, and Applications

Carbon dots (CDs), a new type of carbon-based fluorescent nanomaterial, have attracted widespread attention because of their numerous excellent properties. Lignocellulosic biomass is the most abundant renewable natural resource and possesses broad potential to manufacture different composite and smart materials. Numerous studies have explored the potential of using the components (such as cellulose, hemicellulose, and lignin) in lignocellulosic biomass to produce CDs. There are few papers systemically aiming in the review of the state-of-the-art works related to lignocellulosic biomass-derived CDs. In this review, the significant advances in synthesis processes, formation mechanisms, structural characteristics, optical properties, and applications of lignocellulosic biomass-based CDs such as cellulose-based CDs, hemicellulose-based CDs and lignin-based CDs in latest research are reviewed. In addition, future research directions on the improvement of the synthesis technology of CDs using lignocellulosic biomass as raw materials to enhance the properties of CDs are proposed. This review will serve as a road map for scientists engaged in research and exploring more applications of CDs in different science fields to achieve the highest material performance goals of CDs.

Nanoparticle-mediated therapeutic management in cholangiocarcinoma drug targeting: Current progress and future prospects

Patients with cholangiocarcinoma (CCA) often have an unfavorable prognosis because of its insidious nature, low resectability rate, and poor response to anticancer drugs and radiotherapy, which makes early detection and treatment difficult. At present, CCA has a five-year overall survival rate (OS) of only 5%, despite advances in therapies. New an increasing number of evidence suggests that nanoplatforms may play a crucial role in enhancing the pharmacological effects and in reducing both short- and long-term side effects of cancer treatment. This document reviews the advantages and shortcomings of nanoparticles such as liposomes, polymeric nanoparticle，inorganic nanoparticle, nano-metals and nano-alloys, carbon dots, nano-micelles, dendrimer, nano-capsule, bio-Nanomaterials in the diagnosis and treatment of CCA and discuss the current challenges in of nanoplatforms for CCA.

Removal of Sulfide Ions from Kraft Washing Effluents by Photocatalysis with N and Fe Codoped Carbon Dots

N and Fe codoped carbon dots (N,Fe-CDs) were fabricated from citric acid, L-glutamic acid and ferric chloride via a hydrothermal method for the photocatalytic removal of S2- from kraft washing effluents (KWE). The N,Fe-CDs were fluorescent nanoparticles (average size of 3.18 nm) and catalyzed the oxidation of S2- following a first-order kinetic model with an activation energy of 33.77 kJ/mol. The N,Fe-CDs tolerated elevated temperatures as high as 80 °C without catalyst deactivation. The N,Fe-CDs catalysts were reusable for at least four cycles, preserving over 90% of the activity. In the treatment of KWE from the kraft pulping of eucalyptus, the concentration of S2- was decreased by the N,Fe-CDs from 1.19 to 0.41 mmol/L in 6 h. Consequently, near complete remediation was obtained in 24 h. In addition, half of the chemical oxygen demand was removed after treatment with 500 mg/L of the N,Fe-CDs. In addition, the present photocatalyst was safe within a concentration of 200 mg/L, as indicated by the acetylcholinesterase inhibition test. Our findings may help develop a cleaner production process for kraft brownstock washing.

Green Synthesis of Highly Fluorescent Carbon Dots from Bovine Serum Albumin for Linezolid Drug Delivery as Potential Wound Healing Biomaterial: Bio-Synergistic Approach, Antibacterial Activity, and In Vitro and Ex Vivo Evaluation

A simple and green approach was developed to produce novel highly fluorescent bovine serum albumin carbon dots (BCDs) via facile one-step hydrothermal treatment, using bovine serum albumin as a precursor carbon source. Inherent blue photoluminescence of the synthesized BCDs provided a maximum photostability of 90.5 ± 1.2% and was characterized via TEM, FT-IR, XPS, XRD, UV-visible, and zeta potential analyses. By virtue of their extremely small size, intrinsic optical and photoluminescence properties, superior photostability, and useful non-covalent interactions with the synthetic oxazolidinone antibiotic linezolid (LNZ), BCDs were investigated as fluorescent nano-biocarriers for LNZ drug delivery. The release profile of LNZ from the drug delivery system (LNZ-BCDs) revealed a distinct biphasic release, which is beneficial for mollifying the lethal incidents associated with wound infection. The effective wound healing performance of the developed LNZ-BCDs were evaluated through various in vitro and ex vivo assays such as MTT, ex vivo hemolysis, in vitro antibacterial activity, in vitro skin-related enzyme inhibition, and scratch wound healing assays. The examination of LNZ-BCDs as an efficient wound healing biomaterial illustrated excellent biocompatibility and low cytotoxicity against normal human skin fibroblast (HSF) cell line, indicating distinct antibacterial activity against the most common wound infectious pathogens including Staphylococcus aureus (ATCC^® 25922) and methicillin-resistant Staphylococcus aureus, robust anti-elastase, anti-collagenase, and anti-tyrosinase activities, and enhanced cell proliferation and migration effect. The obtained results confirmed the feasibility of using the newly designed fluorescent LNZ-BCDs nano-bioconjugate as a unique antibacterial biomaterial for effective wound healing and tissue regeneration. Besides, the greenly synthesized BCDs could be considered as a great potential substitute for toxic nanoparticles in biomedical applications due to their biocompatibility and intense fluorescence characteristics and in pharmaceutical industries as promising drug delivery nano-biocarriers for effective wound healing applications.

Recent advances in lignin-based carbon materials and their applications: A review

As the most abundant natural aromatic polymer, tens of million of tons of lignin produced in paper-making or biorefinery industry are used as fuel annually, which is a low-value utilization. Moreover, burning lignin results in large amounts of carbon dioxide and pollutants in the air. The potential of lignin is far from being fully exploited and the search for high value-added application of lignin is highly pursued. Because of the high carbon content of lignin, converting lignin into advanced carbon-based structural or functional materials is regarded as one of the most promising solutions for both environmental protection and utilization of renewable resources. Significant progresses in lignin-based carbon materials (LCMs) including porous carbon, activated carbon, carbon fiber, carbon aerogel, nanostructured carbon, etc., for various valued applications have been witnessed in recent years. Here, this review summarized the recent advances in LCMs from the perspectives of preparation, structure, and applications. In particular, this review attempts to figure out the intrinsic relationship between the structure and functionalities of LCMs from their recent applications. Hopefully, some thoughts and discussions on the structure-property relationship of LCMs can inspire researchers to stride over the present barriers in the preparation and applications of LCMs.

Preparation, Properties, and Application of Lignocellulosic-Based Fluorescent Carbon Dots

Carbon dots (CDs) are a relatively new type of fluorescent carbon material with excellent performance and widespread application. As the most readily available and widely distributed biomass resource, lignocellulosics are a renewable bioresource with great potential. Research into the preparation of CDs with lignocellulose (LC-CDs) has become the focus of numerous researchers. Compared with other carbon sources, lignocellulose is low cost, rich in structural variety, exhibits excellent biocompatibility,^[1] and the structures of CDs prepared by lignin, cellulose, and hemicellulose are similar. This Review summarized research progress in the preparation of CDs from lignocellulosics in recent years and reviewed traditional and new preparation methods, physical and chemical properties, optical properties, and applications of LC-CDs, providing guidance for the formation and improvement of LC-CDs. In addition, the challenges of synthesizing LC-CDs were also highlighted, including the interaction of different lignocellulose components on the formation of LC-CDs and the nucleation and growth mechanism of LC-CDs; from this, current trends and opportunities of LC-CDs were examined, and some research methods for future research were put forward.

Microwave-assisted green synthesis of multi-functional carbon quantum dots as efficient fluorescence sensor for ultra-trace level monitoring of ammonia in environmental water

This study reports a facile green preparation of self-assembled multi-functional carbon quantum dots (CQDs) via direct pyrolysis technique coupled with microwave-assisted synthesis using Ziziphus Mauritiana stone biomass (as a bio-resource precursor). The synthesized multi-functional CQDs was characterized using FT-IR, XRD, XPS, TEM, and fluorescence spectroscopy techniques. The results exhibit that the prepared CQDs are spherical-shaped with an average diameter of 2-4 nm and showed bright bluish-green emissions property with stable dispersion and high photostability in the aqueous medium. Furthermore, the emission properties of CQDs were examined by quenched with ammonia (NH₃) and other molecules in aqueous media. Results indicated that the developed CQDs showed effective fluorescent for the selective and sensitive detection (sensor) of NH₃ with a detection limit of 10 nM. Thus, the presented procedure is a simple, low-cost, efficient, chemical-free synthesis of CQDs and can be applied as selective and sensitive (sensor) monitoring of NH₃ concentration in aquatic environmental samples.

Nitrogen-rich carbon quantum dots (N-CQDs) based on natural deep eutectic solvents: Simultaneous detection and treatment of trace Co2+ under saline conditions

Trace Co²⁺, when present in large quantities, is harmful to the environment and therefore cannot be ignored. Inductively coupled plasma mass spectrometry (ICP-MS) is a standard method used to detect metal ions, however, detecting trace Co²⁺ under high saline conditions can be challenging. Similarly, existing Co²⁺ treatment methods are prone to secondary pollution and have high energy consumption. Therefore, it is necessary to find an efficient and non-polluting method for Co²⁺ detection and treatment. This study successfully synthesized nitrogen-rich carbon quantum dots (N-CQDs) based on natural deep eutectic solvents (NADES) using a one-step solvothermal method. The prepared N-CQDs exhibited excellent fluorescence and high salt tolerance. The simultaneous detection and treatment of trace Co²⁺ in water under high salinity conditions were achieved for the first time. The response of the N-CQDs to Co²⁺ under saline condition was linear in the range of 5-250 μM with a limit of detection (LOD) of 1.2269 μM. Feasibility of practical application was assessed by quantitative detection of Co²⁺ in real water samples. Furthermore, the N-CQDs can treat Co²⁺, and the removal rate was 99.98%.

Lignin-based fluorescence-switchable graphene quantum dots for Fe3+ and ascorbic acid detection

The synthesis of lignin-based graphene quantum dots (GQDs) with excellent fluorescence stability, quantum yield, and biocompatibility for sensitive and selective detection of Fe³⁺ and ascorbic acid (AA) has remained a challenging endeavor. Using an acidolysis process with 17.5% nitric acid followed by hydrothermal treatment at 200 °C, this study provided an improved synthesis route for the production of high-quality GQDs from alkali lignin. The nitrogen-doped GQDs exhibit remarkable fluorescence stability under a wide range of pH (3-10), duration (1-12 h), and [NaCl] (0-1000 mM) conditions, and have a high quantum yield of 28%. The GQDs or GQDs/Fe³⁺ sensing systems ([GQDs] at 50 mg L^-1, [Fe³⁺] at 500 μmol L^-1, and UV excitation at 370 nm) for fluorescence sensing of Fe³⁺ or AA have excellent sensitivity, selectivity, and reproducibility. For Fe³⁺ and AA, the limit of detection is 1.49 and 1.62 μmol L^-1, respectively. Mechanism investigation shows that photoluminescence quenching is caused by the formation of GQDs-Fe³⁺ complexes, whereas fluorescence recovery is due to Fe³⁺ reduction by AA.

A ratiometric fluorescence platform composed of MnO2 nanosheets and nitrogen, chlorine co-doped carbon dots and its logic gate performance for glutathione determination

Illustration of the principle of a dual-emission ratiometric fluorescence strategy for the selective detection of GSH based on an N, Cl-CD-assisted MnO2 nanosheet–OPD system.

Nitrogen-doped carbon quantum dots fabricated from cellulolytic enzyme lignin and its application to the determination of cytochrome c and trypsin

A sensitive and effective strategy for the detection of cytochrome c (Cyt c) and trypsin was developed using biomass nitrogen-doped carbon quantum dots (N-CQDs) as the fluorescence probe. N-CQDs were synthesized through a one-pot hydrothermal method by utilizing cellulolytic enzyme lignin as the carbon source and ammonia as the solvent and nitrogen source. The obtained N-CQDs had good water solubility and stable optical properties. The introduction of nitrogen increased fluorescence quantum yield (QY) to 8.23%, which was almost four times as high as that before nitrogen doping. The N-CQDs were fabricated as a label-free biosensor to detect Cyt c and trypsin. The fluorescence of N-CQDs was quenched with positively charged Cyt c due to electrostatic induction aggregation and static quenching. However, Cyt c tended to be hydrolyzed into small peptides in the presence of trypsin, which caused fluorescence recovery of the N-CQDs/Cyt c complex. A wide linear response range was achieved for Cyt c within 1-50 μM and the developed N-CQDs/Cyt c complex displayed a linear response for trypsin within 0.09-5.4 U/mL. The detection limits were 0.29 μM for Cyt c and 0.013 U/mL for trypsin, respectively. Furthermore, this assay had been applied to Cyt c and trypsin detection in serum samples with the recoveries in the range of 94.6-98.5% and 95.5-102.0%, respectively. The established method was sensitive, selective, easy to operate, and low cost, which proved its potential application in clinical diagnosis. The synthesis and fluorescence mechanism of N-CQDs and the strategy for Cyt c and trypsin detection.

An Overview of the Recent Developments in Carbon Quantum Dots—Promising Nanomaterials for Metal Ion Detection and (Bio)Molecule Sensing

The fluorescent carbon quantum dots (CQDs) represent an emerging subset of carbonaceous nanomaterials, recently becoming a powerful tool for biosensing, bioimaging, and drug and gene delivery. In general, carbon dots are defined as zero-dimensional (0D), spherical-like nanoparticles with <10 nm in size. Their unique chemical, optical, and electronic properties make CQDs versatile materials for a wide spectrum of applications, mainly for the sensing and biomedical purposes. Due to their good biocompatibility, water solubility, and relatively facile modification, these novel materials have attracted tremendous interest in recent years, which is especially important for nanotechnology and nanoscience expertise. The preparation of the biomass-derived CQDs has attracted growing interest recently due to their low-cost, renewable, and green biomass resources, presenting also the variability of possible modification for the enhancement of CQDs’ properties. This review is primarily focused on the recent developments in carbon dots and their application in the sensing of different chemical species within the last five years. Furthermore, special emphasis has been made regarding the green approaches for obtaining CQDs and nanomaterial characterization toward better understanding the mechanisms of photoluminescent behavior and sensing performance. In addition, some of the challenges and future outlooks in CQDs research have been briefly outlined.

Deep eutectic solvent assisted synthesis of carbon dots using Sophora flavescens Aiton modified with polyethyleneimine: Application in myricetin sensing and cell imaging

Here, an efficient method for synthesizing carbon dots (CDs) using a deep eutectic solvent (DES) was developed. To investigate the influence of different DESs on the quantum yield of CDs, different hydrogen-bonding acceptors (HBAs) and hydrogen-bonding donors (HBDs) were used to synthesize the DES and prepare CDs. Using Sophora flavescens Aiton as precursor, CDs were prepared using choline chloride (ChCl)/urea based DES as reaction media and doping agent in the presence of water. The CDs showed strong blue fluorescence and were further modified with polyethyleneimine (CDs@PEI). The fluorescence intensity of CDs@PEI was selectively quenched by myricetin with a limit of detection (LOD) of 10 nM. Furthermore, CDs@PEI was used to analyze myricetin in the extracts that were fluorescent by DES with satisfactory performance of Abelmoschus manihot (Linn.) Medicus flowers, vine teas and blueberries. Finally, the bio-imaging application of CDs@PEI was tested and the results confirmed its potential application in bio-imaging.

Sensor and Bioimaging Studies Based on Carbon Quantum Dots: The Green Chemistry Approach

Since carbon quantum dots have high photoluminescent efficiency, it has been a desired material in sensor and bioimaging applications. In recent years, the green chemistry approach has been preferred and the production of quantum dots has been reported in many studies using different precursors from natural, abundant, or waste sources. Hydrothermal, chemical oxidation, microwave supported, ultrasonic, solvothermal, pyrolysis, laser etching, solid-state, plasma, and electrochemical methods have been reported in the literature. In this review article, green chemistry strategies for carbon quantum dot synthesis is summarized and compared with conventional methods using methodologic and statistical data. Furthermore, a detailed discussion on sensor and bioimaging applications of carbon quantum dots produced with green synthesis approaches are presented with a special focus on the last decade.

Atomically dispersed Eu(III) sites in natural deep eutectic solvents based fluorescent probe efficient identification of Fe3+ and Cu2+ in wastewater

Heavy metal ions in wastewater have brought serious environmental pollution. To improve the detection efficiency, it is important to find useful fluorescent probes. The emerging green natural deep eutectic solvents (NADESs) offer attractive option for "green" detection for its good biocompatibility, easy preparation, and high sensitivity. In this study, a multi-functionalized fluorescent probe with atomically dispersed EuCl₃·6H₂O in amino acid-based NADESs (l-Glutamic acid/Glycerol, l-Glu/Gly) was synthesized by metal-ligand coordination interactions with a mass ratio of 15:1. Combined with the NADESs and rare earth metal, the l-Glu/Gly/EuCl₃·6H₂O could form the amino site and Eu²⁺ site fluorescent centers. Under the excitation wavelength of 370 nm, it had dual emission peaks at 425 nm and 470 nm with efficient resonance energy transfer. The stable optoelectronic properties of l-Glu/Gly/EuCl₃·6H₂O under external factors, such as mass ratio (13,1 to 18:1), temperature (30-50 °C), pH (1 to 14) and storage time ( >42 days), approved l-Glu/Gly/EuCl₃·6H₂O an excellent fluorescence probe. In the application of water-quality monitoring, Fe³⁺ and Cu²⁺ could react with l-Glu/Gly/EuCl₃·6H₂O in different reactive patterns. The blue fluorescence was quenched by Fe³⁺ and enhanced by Cu²⁺, thus metal ions could be distinguished with high sensitivity. The detective process was determined and the fluorescent mechanism was also proposed. l-Glu/Gly/EuCl₃·6H₂O fluorescent probe was demonstrated to be an efficient fluorescent probe for metal detection avoiding the hydrothermal process, and the cumbersome of ilter, dialysis, freeze drying.

CdSe quantum dots capped with a deep eutectic solvent as a fluorescent probe for copper(II) determination in various drinks

The present study shows that copper(II) ions can be determined with a new fluorescent probe that is based on the use of CdSe quantum dots capped with deep eutectic solvent (DES-CdSe QDs). The capped QDs were prepared in aqueous phase by a one-step procedure under ambient atmosphere using selenium dioxide as a stable precursor for selenium, and ascorbic acid as non-toxic reducing agent. The deep eutectic solvent is composed of choline chloride and thioglycolic acid and acts as stabilizing and functionalizing agent. The fluorescent probe undergoes an increase in the fluorescence intensity (with excitation/emission wavelengths at 380/560 nm) in the presence of Cu(II). Other ions display no significant effect on fluorescence. The effects of sample pH value, concentration of buffer, and volume of QDs solution were optimized by response surface methodology using a Box-Behnken statistical design. Under the optimal conditions, the response of the probe is linear in the 10-600 nM Cu(II) concentration range, with a 5.3 nM limit of detection. This is lower than the allowable maximum Cu(II) concentration in drinking water. The relative standard deviation of the method for five replicate measurements of Cu(II) at a 100 nM concentration level is 2.0%. The probe was successfully applied to the determination of Cu(II) in various drinks. Graphical abstractSchematic representation of a fluorometric method for the determination of Cu(II) at nanomolar concentration levels. The fluorescent system consists of deep eutectic solvent-capped cadmium selenide quantum dots (DES-CdSe QDs). Fluorescence is strongly enhanced by copper(II).

Sustainable Synthesis of Bright Green Fluorescent Nitrogen-Doped Carbon Quantum Dots from Alkali Lignin

Sustainable, inexpensive, and environmentally friendly biomass waste can be exploited for large-scale production of carbon nanomaterials. Here, alkali lignin was employed as a precursor to synthesize carbon quantum dots (CQDs) with bright green fluorescence through a simple one-pot route. The prepared CQDs had a size of 1.5-3.5 nm, were water-dispersible, and showed wonderful biocompatibility, in addition to their excellent photoluminescence and electrocatalysis properties. These high-quality CQDs could be used in a wide range of applications such as metal-ion detection, cell imaging, and electrocatalysis. The wide range of biomass lignin feedstocks provide a green, low-cost, and viable strategy for producing high-quality fluorescent CQDs and enable the conversion of biomass waste into high-value products that promote sustainable development of the economy and human society.