Shear-Thickening Fluid Using Oxygen-Plasma-Modified Multi-Walled Carbon Nanotubes to Improve the Quasi-Static Stab Resistance of Kevlar Fabrics

Dielectric Barrier Discharge Plasma Processing and Sr-Doped ZnO/CNT Photocatalyst Decoration of Cotton Fabrics for Self-Cleaning Application

Nonthermal plasma processing is a chemical-free and environmentally friendly technique to enhance the self-cleaning activity of nanoparticle-coated cotton fabrics. In this research, Sr-doped ZnO/carbon nanotube (CNT) photocatalysts, namely, S10ZC2, S15ZC2, and S20ZC2 with different Sr doping concentrations, were synthesized using the sol-gel method and coated on plasma-functionalized fabric to perform the self-cleaning tests. The fabrics were treated with dielectric barrier discharge plasma in an open environment for 3 min to achieve a stable coating of nanoparticles. The energy band gap of the photocatalyst decreased with an increase in the level of Sr doping. The band gap of S10ZC2, S15ZC2, and S20ZC2 photocatalysts was estimated to be 2.85, 2.78, and 2.5 eV, respectively. The hexagonal wurtzite structure of ZnO was observed on the fabric surface composited with CNTs and Sr. The S20ZC2 photocatalyst showed better homogeneity and photocatalytic response on the fabric when compared with S10ZC2- and S15ZC2-coated fabrics. The S20ZC2 photocatalyst showed 89% dye degradation efficiency after 4 h of light exposure in methylene blue solution, followed by S15ZC2 (84%) and S10ZC2 (80%) photocatalysts.

Statistical approach on the inter-yarn friction behavior of the dual-phase STF/ρ-Aramid impregnated fabrics via factorial design and 3D-RSM

Shear thickening fluids (STFs) refer to non-Newtonian fluids of the dilatant variety, wherein their viscosity experiences a significant surge with an escalation in the shear rate. In this investigative work, the friction behavior between yarns (pull-out) and absorption of static and kinetic energy during the phenomenon of friction between yarns in STFs are performed by monophase (MP-STF) adding nano SiO2 and dual-phase (MP-STF) adding carbon nanotubes. The ρ-Aramid fabrics were reinforced via the "foulard process", and carried out on MP-STF, and DP-STF/ρ-Aramid-impregnated fabrics to evaluate and compare with the enhancement in interfacial friction properties between yarns. The results showed that DP-STF has more significant than MP-STF and MP-STF in ultimate load, kinetic shear stress, static shear stress, and friction energy level effects. The DP-STF exhibits various friction enhancement mechanisms at the yarn interface, leading to higher absorption of static and kinetic energy related to interfacial friction, as indicated by the results obtained. Furthermore, the DP-STF/ρ-Aramid impregnated fabrics exhibited ultimate load (22.23 ± 0.522 N), kinetic shear stress (35.73 ± 0.850 MPa*100), static shear stress (36.28 ± 0.900 MPa*100), and friction energy level (610.33 ± 0.250). Increased ultimate load (581.7% and 180.7%), kinetic shear stress (621.4% and 174.6%), static shear stress (550.5% and 159.1%), and friction energy level (680.2 and 186.7%) compared to WT-STF and MP-STF, respectively. The current discoveries hold immense potential for various applications in the fields of engineering and smart material technologies. These applications span a multiplicity of industries, including sports products, medical advancements, space technology, as well as protective and shielding products.

Stab-Resistant Polymers-Recent Developments in Materials and Structures

Stab-resistant garments have been used for centuries, utilizing metals, paper, or polymeric structures, often inspired by natural structures such as scales. Nowadays, stab-resistant vests or vest inserts are used by police and security personnel, but also by bus drivers, ambulance officers, and other people who are empirically often attacked on duty. Since stab protection garments are often heavy and thus uncomfortable and not well accepted, whether in the form of chain-mail or metal inserts in protective vests, researchers are striving to find lightweight, drapable alternatives, often based on polymeric materials. These research attempts have recently focused on textile fabrics, mostly with impregnation by shear-thickening fluids (STFs) or ceramic coatings, as well as on lightweight composites. The first studies on 3D printed polymeric objects with tailored shapes, as well as theoretical investigations of the stab-protective effect of different materials, have been published throughout the last years. Here, we discuss different measurement methods, including dynamic and quasistatic methods, and correlations of stab-resistance with other physical properties, before we give an overview of recent developments of stab-resistant polymers, using different materials/material combinations and structures.

Synthesis and properties of SiO2/SiO2@Ag two-phase STFs

Soft body armor with a strain-sensing function using conductive shear thickening fluids (STFs) has gradually gained research interest. In this study, conductive SiO₂@Ag core-shell microspheres were synthesized and the influence of process parameters on their properties was evaluated. Subsequently, SiO₂ and SiO₂@Ag were used as dispersed phases to prepare two-phase STFs, the effect of the core-shell microspheres' proportion on the rheological properties of the STFs was investigated, and its mechanism was discussed. The results indicated that SiO₂@Ag core-shell microspheres were coated with elemental silver and when the concentration of sodium hydroxide and glucose were 0.07 and 0.09 mol L^-1, respectively, the coating surface was the most uniform and compact, and the conductivity reached the minimum value of 0.56 Ω cm. The two-phase STFs exhibited good and reversible shear thickening behaviors and the critical shear rate decreased with increasing core-shell microsphere concentration. Additionally, when the mass fraction of SiO₂ and SiO₂@Ag core-shell microspheres was 45% and 20%, respectively, the thickening rate was 325%, and the resistance of two-phase STFs decreased simultaneously with the emergence of shear thickening that reached the lowest value of 795.16 kΩ. This study provides a novel strategy for synthesizing conductive STFs for strain-sensing flexible stab-resistant composites.

Novel Biocompatible with Animal Cells Composite Material Based on Organosilicon Polymers and Fullerenes with Light-Induced Bacteriostatic Properties

A technology for producing a nanocomposite based on the borsiloxane polymer and chemically unmodified fullerenes has been developed. Nanocomposites containing 0.001, 0.01, and 0.1 wt% fullerene molecules have been created. It has been shown that the nanocomposite with any content of fullerene molecules did not lose the main rheological properties of borsiloxane and is capable of structural self-healing. The resulting nanomaterial is capable of generating reactive oxygen species (ROS) such as hydrogen peroxide and hydroxyl radicals in light. The rate of ROS generation increases with an increase in the concentration of fullerene molecules. In the absence of light, the nanocomposite exhibits antioxidant properties. The severity of antioxidant properties is also associated with the concentration of fullerene molecules in the polymer. It has been shown that the nanocomposite upon exposure to visible light leads to the formation of long-lived reactive protein species, and is also the reason for the appearance of such a key biomarker of oxidative stress as 8-oxoguanine in DNA. The intensity of the process increases with an increase in the concentration of fullerene molecules. In the dark, the polymer exhibits weak protective properties. It was found that under the action of light, the nanocomposite exhibits significant bacteriostatic properties, and the severity of these properties depends on the concentration of fullerene molecules. Moreover, it was found that bacterial cells adhere to the surfaces of the nanocomposite, and the nanocomposite can detach bacterial cells not only from the surfaces, but also from wetted substrates. The ability to capture bacterial cells is primarily associated with the properties of the polymer; they are weakly affected by both visible light and fullerene molecules. The nanocomposite is non-toxic to eukaryotic cells, the surface of the nanocomposite is suitable for eukaryotic cells for colonization. Due to the combination of self-healing properties, low cytotoxicity, and the presence of bacteriostatic properties, the nanocomposite can be used as a reusable dry disinfectant, as well as a material used in prosthetics.

Functional Kevlar-Based Triboelectric Nanogenerator with Impact Energy-Harvesting Property for Power Source and Personal Safeguard

A novel shock-resistant, self-generating triboelectric nanogenerator (SS-TENG) with high-speed impact energy-harvesting and safeguarding properties was developed by assembling Kevlar fiber and conductive shear-stiffening gel. The SS-TENG with energy-harvesting property generated a maximum power density of 5.3 mW/m² with a voltage of 13.1 V under oscillator compression and could light up light-emitting diode arrays. Owing to the energy absorption effect, the as-designed SS-TENG could dissipate impact forces from 2880 to 1460 N, showing anti-impact performance under the drop hammer impact. It also sensed the loading forces by outputting 36.4 V. Functionalized as a self-powered sensor, SS-TENG monitored various human movements and provided protection from hammer impact. Interestingly, a wearable sole array with high sensitivity and a fast response could distinguish toe in/out motions. More importantly, this functional SS-TENG presented excellent anti-impact behavior, which dissipated 94% of kinetic energy under bullet-shooting excitation. It also gathered high speed ballistic energy, which outputted a maximum power density of 3 mW/m². To this end, this SS-TENG with a protection effect and the ability to harvest various impact energy showed promising applications in new power sources, intelligent wearable systems, and safeguard areas.

Shear-Thickening Composites for On-Demand Rebound Performance and Softness

For footwear insoles, high rebound performance is required in some instances such as for running, while softness for comfort is of higher importance during normal walking and standing to minimize high stress. Hence, materials with rebound performance in some scenarios and softness for other scenarios are desired. In this paper, we investigate rebound performance and hardness of composites made of a shear-thickening material and elastic foam. First, a hydrogel type of shear-thickening material (Slime) is characterized to investigate the influence of water content. After that, two particular shear-thickening hydrogels with better rebound performance (but not outstanding in the shear-thickening effect) are selected and integrated into the elastic foam to produce a composite insole. It is found that, as compared with the commercial elastic insole and commercial shear-thickening insole, softer and superior rebound performance can be achieved simultaneously only if the right shear-thickening material is used in the composite.

Effect of High Molecular Weight PPTA on Liquid Crystalline Phase and Spinning Process of Aramid Fibers

High molecular weight poly (p-phenylene-terephthalamide) (h-PPTA) was blended with the commercial PPTA in concentrated sulfuric acid to improve the spinnability of the polymer solutions and the mechanical properties of the as-spun fibers. h-PPTA in the solution has an influence on the temperature of the formation of liquid crystalline phenomenon. The temperature range with the existence of the liquid crystalline phase increases upon the contents of h-PPTA in the solution, and the extended temperature window is helpful for the preparation of PPTA fibers by the dry-jet wet-spinning technology. The long-chains of h-PPTA enhance the inter-macromolecular interactions and induce the orientation of short-chains for PPTA along the fiber axis under the shear stress in the spinneret and the stretching stress at the air gap. These effects also increase the maximum drawing ratio in the spinning process and improve the mechanical properties of the obtained fibers. The crystallinity and crystal orientation of the fibers are investigated by X-ray diffraction, and results from sonic velocity test further confirm ordering state of the macromolecular chains. The fibril morphologies of the fibers are also studied by a scanning electric microscope.