Ethylcellulose in Organic Solution or Aqueous Dispersion Form in Designing Taste-Masked Microparticles by the Spray Drying Technique with a Model Bitter Drug: Rupatadine Fumarate

Utilization of the Drug-Polymer Solid Dispersion Obtained by Ball Milling as a Taste Masking Method in the Development of Orodispersible Minitablets with Hydrocortisone in Pediatric Doses

The objective of the conducted research was to design 2 mm orodispersible minitablets of pediatric doses of hydrocortisone (0.5 mg; 1.0 mg) with desirable pharmaceutical properties and eliminate the sensation of a bitter taste using preparation of solid dispersion by ball mill. Hydrocortisone was selected as the model substance, as it is widely utilized in the pediatric population. ODMTs were prepared by compression (preceded by granulation) in a traditional single-punch tablet machine and evaluated using pharmacopoeial tests, DSC, and FTIR analysis. The methods used to evaluate the effectiveness of the taste-masking effect included in vivo participation of healthy volunteers, in vitro drug dissolution and utilization of an analytical device-"electronic tongue". The research employed a preclinical animal model to preliminary investigate the bioequivalence of the designed drug dosage form in comparison to reference products. The study confirmed the possibility of manufacturing good-quality hydrocortisone ODMTs with a taste-masking effect owing to the incorporation of a solid dispersion in the tablet mass.

Critical View on the Qualification of Electronic Tongues Regarding Their Performance in the Development of Peroral Drug Formulations with Bitter Ingredients

In this review, we aim to highlight the advantages, challenges, and limitations of electronic tongues (e-tongues) in pharmaceutical drug development. The authors, therefore, critically evaluated the performance of e-tongues regarding their qualification to assess peroral formulations containing bitter active pharmaceutical ingredients. A literature search using the keywords 'electronic', 'tongue', 'bitter', and 'drug' in a Web of Science search was therefore initially conducted. Reviewing the publications of the past decade, and further literature where necessary, allowed the authors to discuss whether and how e-tongues perform as expected and whether they have the potential to become a standard tool in drug development. Specifically highlighted are the expectations an e-tongue should meet. Further, a brief insight into the technologies of the utilized e-tongues is given. Reliable protocols were found that enable (i) the qualified performance of e-tongue instruments from an analytical perspective, (ii) proper taste-masking assessments, and (iii) under certain circumstances, the evaluation of bitterness.

Application of Starch, Cellulose, and Their Derivatives in the Development of Microparticle Drug-Delivery Systems

Micro- and nanotechnologies have been intensively studied in recent years as novel platforms for targeting and controlling the delivery of various pharmaceutical substances. Microparticulate drug delivery systems for oral, parenteral, or topical administration are multiple unit formulations, considered as powerful therapeutic tools for the treatment of various diseases, providing sustained drug release, enhanced drug stability, and precise dosing and directing the active substance to specific sites in the organism. The properties of these pharmaceutical formulations are highly dependent on the characteristics of the polymers used as drug carriers for their preparation. Starch and cellulose are among the most preferred biomaterials for biomedical applications due to their biocompatibility, biodegradability, and lack of toxicity. These polysaccharides and their derivatives, like dextrins (maltodextrin, cyclodextrins), ethylcellulose, methylcellulose, hydroxypropyl methylcellulose, carboxy methylcellulose, etc., have been widely used in pharmaceutical technology as excipients for the preparation of solid, semi-solid, and liquid dosage forms. Due to their accessibility and relatively easy particle-forming properties, starch and cellulose are promising materials for designing drug-loaded microparticles for various therapeutic applications. This study aims to summarize some of the basic characteristics of starch and cellulose derivatives related to their potential utilization as microparticulate drug carriers in the pharmaceutical field.

The Use of Calcium Phosphate-Based Starter Pellets for the Preparation of Sprinkle IR MUPS Formulation of Rosuvastatin Calcium

Sprinkle formulations represent an interesting concept of medicinal products aimed at the steadily growing population of patients suffering from swallowing difficulties (dysphagia). In the present work, immediate-release sprinkle MUPS (multiple-unit pellet system) containing rosuvastatin calcium as a model drug substance was successfully developed. The formulation was prepared by drug layering technique using novel calcium phosphate-based starting pellets (PharSQ® Spheres CM) of three different particle sizes. The study showed that the developed multiparticulates were characterized by uniform distribution of coating layers thickness, as well as fast dissolution rate (more than 85% of rosuvastatin calcium dissolved within 30 min, as required by the relevant USP/NF monograph). Rosuvastatin calcium, like other statins, has a bitter, unpleasant taste. Investigations conducted with an electronic tongue suggested that the developed formulation achieved the desired taste-masking efficiency. The effect was found to be particle size-dependent, improving as the size of the multiparticulates increased.

Incorporation of Ethylcellulose Microparticles Containing a Model Drug with a Bitter Taste into Nanofibrous Mats by the Electrospinning Technique—Preliminary Studies

Electrospinning is considered a simple and comprehensive technique to formulate ultrafine fibres by using an electric field. Polymeric nanofibers constitute promising materials in biomedical applications as drug delivery systems. For their preparation, both natural and synthetic polymers are utilised. Owing to the potential use of electrospun nanofibers as an orodispersible drug dosage form, ethylcellulose microparticles containing the antihistamine drug rupatadine fumarate, prepared by the spray drying technique to conceal the drug’s bitter taste, were incorporated into nanofibers. The obtained nanofibrous mats were evaluated for morphology, mechanical strength, disintegration time, the drug solid state and acceptability in terms of taste masking efficiency. Preliminary studies showed that hypromellose used as a single polymer was not a suitable substance for the manufacturing of nanofibers. Therefore, in order to facilitate the obtention of homogeneous nonwovens, different grades of polyethylene oxide (2,000,000–2M-Da and 4,000,000–4M-Da) were added, which improved the quality of the prepared mats. Nanofibers of the most satisfactory quality were obtained from hypromellose (6.5% w/v) and PEO (2M, 0.5% w/v). SEM image analysis has shown that the nanofibers were homogeneous and smooth and possessed a fast disintegration time (below 30 s) and an adequate drug content with a simultaneous taste-masking effect (as indicated by the in vivo and in vitro methods). However, further studies are necessary to refine their mechanical characteristics.

Co-spray Drying Drugs with Aqueous Polymer Dispersions (APDs)-a Systematic Review

Aqueous colloidal dispersions of water-insoluble polymers (APDs) avoid hassles associated with the use of organic solvents and offer processing advantages related to their low viscosity and short processing times. Therefore, they became the main vehicle for pharmaceutical coating of tablets and multiparticulates, a process commonly employed using pan and fluidized-bed machinery. Another interesting although less common processing approach is co-spray drying APDs with drugs in aqueous systems. It enables the manufacture of capsule- and matrix-type microspheres with controllable size and improved processing characteristics in a single step. These microspheres can be further formulated into different dosage forms. This systematic review is based on published research articles and aims to highlight the applicability and opportunities of co-spray drying drugs with APDs in drug delivery.

Orodispersible Films with Rupatadine Fumarate Enclosed in Ethylcellulose Microparticles as Drug Delivery Platform with Taste-Masking Effect

Orally disintegrating (orodispersible) films provide a versatile tool for drug administration, especially in the pediatric and geriatric population, since they reduce the risk of choking and do not necessitate drinking water during application. By considering their direct contact with the taste buds, palatability is an influential aspect related to patient compliance. The microparticles based on taste-masking polymers containing drugs enclosed inside effectively mask the unpleasant taste of medicines. Ethylcellulose is a hydrophobic polymer widely used as a taste-masking material. Rupatadine fumarate, a second-generation antihistamine drug, is characterised by an intense bitter taste; therefore, it is crucial to achieve a tolerable taste whilst developing orodispersible formulations with its content. The objective of this study was to develop orally disintegrating films with rupatadine fumarate in the form of ethylcellulose-based microparticles obtained from aqueous dispersions of ethylcellulose—Surelease^® or Aquacoat^® ECD. It was a technological challenge to achieve homogenous drug content per dosage unit and sufficient mechanical properties for film operating due to the necessity to suspend the microparticles in the casting solution. Although the process of obtaining films consisted of several steps (mixing, pouring, drying), the particles were homogeneously dispersed, and each film of the desired size contained the proper dose of the drug. The taste-masking effect was also maintained. This parameter was confirmed by three independent methods: in vivo by healthy volunteers, an electronic tongue and a dissolution test. The applied taste-evaluation techniques showed that the films containing Aquacoat^® ECD microparticles have the highest degree of bitter taste reduction, which confirms the results obtained in our previous studies.

Recent advances in polymeric nanostructured ion selective membranes for biomedical applications

Nano structured ion-selective membranes (ISMs) are very attractive materials for a wide range of sensing and ion separation applications. The present review focuses on the design principles of various ISMs; nanostructured and ionophore/ion acceptor doped ISMs, and their use in biomedical engineering. Applications of ISMs in the biomedical field have been well-known for more than half a century in potentiometric analysis of biological fluids and pharmaceutical products. However, the emergence of nanotechnology and sophisticated sensing methods assisted in miniaturising ion-selective electrodes to needle-like sensors that can be designed in the form of implantable or wearable devices (smartwatch, tattoo, sweatband, fabric patch) for health monitoring. This article provides a critical review of recent advances in miniaturization, sensing and construction of new devices over last decade (2011-2021). The designing of tunable ISM with biomimetic artificial ion channels offered intensive opportunities and innovative clinical analysis applications, including precise biosensing, controlled drug delivery and early disease diagnosis. This paper will also address the future perspective on potential applications and challenges in the widespread use of ISM for clinical use. Finally, this review details some recommendations and future directions to improve the accuracy and robustness of ISMs for biomedical applications.

The use of electronic tongue and sensory panel on taste evaluation of pediatric medicines: a systematic review

The palatability of medications is an essential factor for children's adherence to drug treatment. Several methods for drug taste assessment have been developed. The aim of this review is to explore the literature reports of the main methods for the evaluation of medicines taste, named electronic tongue (e-tongue, in vitro) and human sensory panel. A systematic search was performed up to March 2020 and a total of 88 articles were selected. The e-tongue (57.5%) has been more frequently described than the sensory panel (10.3%), while some articles (32.2%) used both techniques. 74.7% of the articles mentioned 'pediatric', 'paediatric' or 'children' in the text, but only 19.5% developed formulations targeting pediatric audience and sensory testing in children is rarely seen. The e-tongue has predominance of use in the taste evaluation of pediatric medicines probably since it is fast, easy to perform and risk free, besides presenting less imprecise data and no fatigue. The human panel is more realistic, despite its intrinsic variability. In this sense, it is proposed the use of e-tongue as a fast way to select the most promising sample(s) and, after that, the sensory panel should be applied in order to confirm the taste masking.

Formulation and Characterisation of a Combination Captopril and Hydrochlorothiazide Microparticulate Dosage Form

Cardiovascular diseases such as hypertension and cardiac failure in South African children and adolescents are effectively managed long term, using a combination treatment of captopril and hydrochlorothiazide. The majority of commercially available pharmaceutical products are designed for adult patients and require extemporaneous manipulation, prior to administration to paediatric patients. There is a need to develop an age appropriate microparticulate dosing technology that is easy to swallow, dose and alter doses whilst overcoming the pharmacokinetic challenges of short half-life and biphasic pharmacokinetic disposition exhibited by hydrochlorothiazide and captopril. An emulsion solvent evaporation approach using different combinations of polymers was used to manufacture captopril and hydrochlorothiazide microparticles. Design of experiments was used to develop and analyse experimental data, and identifyoptimum formulation and process conditions for the preparation of the microparticles. Characterisation studies to establish encapsulation efficiency, in vitro release, shape, size and morphology of the microparticles were undertaken. The microparticles produced were in the micrometre size range, with an encapsulation efficiency >75% for both hydrochlorothiazide and captopril. The microparticulate technology is able to offer potential resolution to the half-life mediated dosing frequency of captopril as sustained release of the molecule was observed over a 12-h period. The release of hydrochlorothiazide of >80% suggests an improvement in solubility limited dissolution.

Utilization of Ethylcellulose Microparticles with Rupatadine Fumarate in Designing Orodispersible Minitablets with Taste Masking Effect

Minitablets in orodispersible form constitute a flexible drug delivery tool for paediatric and geriatric population as they eliminate the risk of chocking and do not require drinking water in the application. Due to their direct contact with taste buds, taste sensation is an important factor. Preparing microparticles with taste masking polymers utilizing spray drying is an efficient technique for reducing the bitterness of drugs. Ethylcellulose is a hydrophobic polymer widely used as a taste masking material. Rupatadine fumarate, one of the newest antihistamines, features an intensive bitter taste, hence in designing orodispersible formulations, achieving an acceptable taste is a crucial issue. The main objective of this work was to formulate orodispersible minitablets containing taste masked ethylcellulose-based microparticles with rupatadine fumarate and evaluation of their quality, especially in terms of taste masking efficacy. The accessed data indicated that all obtained minitablets were characterized by beneficial pharmaceutical properties. Three independent methods: in vivo with healthy volunteers, in vitro drug dissolution, and “electronic tongue” confirmed that all designed formulations provided satisfactory taste masking rate and that formulation F15 (prepared with Pearlitol^® Flash and Surelease^® microparticles with rupatadine fumarate) was characterized by the lowest bitterness score.

Ethylcellulose-A Pharmaceutical Excipient with Multidirectional Application in Drug Dosage Forms Development

Polymers constitute the most important group of excipients utilized in modern pharmaceutical technology, playing an essential role in the development of drug dosage forms. Synthetic, semisynthetic, and natural polymeric materials offer opportunities to overcome different formulative challenges and to design novel dosage forms for controlled release or for site-specific drug delivery. They are extensively used to design therapeutic systems, modify drug release, or mask unpleasant drug taste. Cellulose derivatives are characterized by different physicochemical properties, such as swellability, viscosity, biodegradability, pH dependency, or mucoadhesion, which determine their use in industry. One cellulose derivative with widespread application is ethylcellulose. Ethylcellulose is used in pharmaceutical technology as a coating agent, flavoring fixative, binder, filler, film-former, drug carrier, or stabilizer. The aim of this article is to provide a broad overview of ethylcellulose utilization for pharmaceutical purposes, with particular emphasis on its multidirectional role in the development of oral and topical drug dosage forms.