Degradable Poly(ether-ester-urethane)s Based on Well-Defined Aliphatic Diurethane Diisocyanate with Excellent Shape Recovery Properties at Body Temperature for Biomedical Application

A Multiple Remotely Controlled Platform from Recyclable Polyurethane Composite Network with Shape-Memory Effect and Self-Healing Ability

Stimuli-responsive materials can transform from temporary to permanent shapes by specific external triggers. However, the damage might inevitably occur to them when exposed to complex environments, causing a significant reduction in their lifetime and quality. In this study, recyclable remotely controlled shape-changing polyurethane composite with self-healing compacity is developed from polyethylene glycol, polytetrahydrofuran diol using isophorone diisocyanate as crosslinker. After the incorporation of magnetite nanoparticles (MNPs), remote heating could be generated by near-infrared irradiation and alternating magnetic fields. The results show that MNPs are uniformly distributed in the smart networks, resulting in tunable temperature changes of the polymer composite material under various direct/indirect triggering in bending experiments, presenting different shape recovery rates. Moreover, to enhance the self-healing capability, a disulfide bond is introduced into the polymer networks, and the results show that highly efficient and rapid healing could be achieved from tensile tests, scanning electron microscopy as well as optical microscopy. Additionally, the synergistic effect of transesterification and the dynamic exchange of disulfide bonds brin the networks reproducibility for recycling use. The obtained material is promising to be an alternative material for soft robots and smart sensors.

Shape Memory Polymer-Based Endovascular Devices: Design Criteria and Future Perspective

Devices for the endovascular embolization of intracranial aneurysms (ICAs) face limitations related to suboptimal rates of lasting complete occlusion. Incomplete occlusion frequently leads to residual flow within the aneurysm sac, which subsequently causes aneurysm recurrence needing surgical re-operation. An emerging method for improving the rates of complete occlusion both immediately after implant and in the longer run can be the fabrication of patient-specific materials for ICA embolization. Shape memory polymers (SMPs) are materials with great potential for this application, owing to their versatile and tunable shape memory properties that can be tailored to a patient’s aneurysm geometry and flow condition. In this review, we first present the state-of-the-art endovascular devices and their limitations in providing long-term complete occlusion. Then, we present methods for the fabrication of SMPs, the most prominent actuation methods for their shape recovery, and the potential of SMPs as endovascular devices for ICA embolization. Although SMPs are a promising alternative for the patient-specific treatment of ICAs, there are still limitations that need to be addressed for their application as an effective coil-free endovascular therapy.

Synthesis and Study of Physical and Mechanical Properties of Urethane-Containing Elastomers Based on Epoxyurethane Oligomers with Controlled Crystallinity

The influence of the molecular weight of oligoamine, oligoether, and the type of diisocyanate on the physical and mechanical properties of elastomers with urethane hydroxyl hard segments was studied. For this purpose, oligoetherdiamines with molecular weights ~1008 and ~1400 g mol⁻¹ were synthesized by a three-stage method. Epoxyurethane oligomers were synthesized according to a two-step route with an oligodiisocyanate as an intermediate product. A series of 12 elastomers with controlled crystallinity were synthesized from these elastomers and amines. The deformation and strength properties of the elastomers were studied.

Highly Stretchable and Sensitive Single-Walled Carbon Nanotube-Based Sensor Decorated on a Polyether Ester Urethane Substrate by a Low Hydrothermal Process

We report a highly stretchable sensor with low-concentration (1.5 wt %) single-walled carbon nanotubes (SWCNTs) on flexible polyether ester urethane (PEEU) yarn, fabricated using a low hydrothermal process at 90 °C. Although SWCNTs restrict the PEEU polymer chain mobility, the resulting ductility of our nanocomposites reduces only by 16.5% on average, initially from 667.3% elongation at break to 557.2%. The resulting electrical resistivity of our nanocomposites can be controlled systematically by the number of hydrothermal cycles. A high gauge factor value of 4.84 is achieved at a tensile strain below 100%, and it increases up to 28.5 with applying a tensile strain above 450%. We find that the piezoresistivity of our nanocomposite is sensitive to temperature variations of 25-85 °C due to the hopping effect, which promotes more charge transport at elevated temperatures. Our nanocomposites offer both a high sensitivity and a large strain sensing range, which is achieved with a relatively simple fabrication technique and low concentration of SWCNTs.

Effect of Thermal Aging on the Physico-Chemical and Optical Properties of Poly(ester urethane) Elastomers Designed for Passive Damping (Pads) of the Railway

The aim of this study consists of monitoring the effect of thermal aging on the physico-chemical and optical properties of poly(ester urethane) elastomers designed as damping materials for railways. The materials were obtained by polyaddition in two stages in melt, resulting in regular structures. The structural modifications during the thermal aging of the samples were monitored using FTIR, color changes, TGA in non-isothermal and isothermal conditions, DSC and physico-mechanical measurements. The structural regularity of the rigid and flexible segments maintained the good mechanical properties of the structures up to 200 h of thermal aging at the elevated temperatures of 40 °C, 70 °C, 100 °C and 130 °C. It was observed that at 40 °C and low exposure times, changes occur mainly to the carbonyl groups of the soft segments. At higher temperatures and longer exposure times urethane groups were affected. Extended thermal aging led to significant changes in thermo-mechanical and optical properties.

Targeting Fluorescence Imaging of RGD-Modified Indocyanine Green Micelles on Gastric Cancer

Early diagnosis and complete resection of the tumor is an important way to improve the quality of life of patients with gastric cancer. In recent years, near-infrared (NIR) materials show great potential in fluorescence-based imaging of the tumors. To realize a satisfying intraoperative fluorescence tumor imaging, there are two pre-requirements. One is to obtain a stable agent with a relatively longer circulation time. The second is to make it good biocompatible and specific targeting to the tumor. Here, we developed an RGD-modified Distearyl acylphosphatidyl ethanolamine-polyethylene glycol micelle (DSPE-PEG-RGD) to encapsulate indocyanine green (ICG) for targeting fluorescence imaging of gastric cancer, aimed at realizing tumor-targeted accumulation and NIR imaging. ¹H NMR spectroscopy confirmed its molecular structure. The characteristics and stability results indicated that the DSPE-PEG-RGD@ICG had a relatively uniform size of <200 nm and longer-term fluorescence stability. RGD peptides had a high affinity to integrin α_vβ₃ and the specific targeting effect on SGC7901 was assessed by confocal microscopy in vitro. Additionally, the results of cytotoxicity and blood compatibility in vitro were consistent with the acute toxicity test in vivo, which revealed good biocompatibility. The biodistribution and tumor targeting image of DSPE-PEG-RGD@ICG were observed by an imaging system in tumor-bearing mice. DSPE-PEG-RGD@ICG demonstrated an improved accumulation in tumors and longer circulation time when compared with free ICG or DSPE-PEG@ICG. In all, DSPE-PEG-RGD@ICG demonstrated ideal properties for tumor target imaging, thus, providing a promising way for the detection and accurate resection of gastric cancer.

Heating/Solvent Responsive Shape-Memory Polymers for Implant Biomedical Devices in Minimally Invasive Surgery: Current Status and Challenge

This review is about the fundamentals and practical issues in applying both heating and solvent responsive shape memory polymers (SMPs) for implant biomedical devices via minimally invasive surgery. After revealing the general requirements in the design of biomedical devices based on SMPs and the fundamentals for the shape-memory effect in SMPs, the underlying mechanisms, characterization methods, and several representative biomedical applications, including vascular stents, tissue scaffolds, occlusion devices, drug delivery systems, and the current R&D status of them, are discussed. The new opportunities arising from emerging technologies, such as 3D printing, and new materials, such as vitrimer, are also highlighted. Finally, the major challenge that limits the practical clinical applications of SMPs at present is addressed.

Functionalized Multiarmed Polycaprolactones as Biocompatible Tissue Adhesives

Existing tissue adhesives have a trade-off between adhesive strength and biocompatibility. Here, we report a series of biocompatible multiarmed polycaprolactones (PCL) as tissue adhesives that can be released from a hot glue gun and the length of each arm was kept at ∼2-3 kg mol^-1 in all the polymers. The adhesion properties were dependent on the number of functionalized (N-hydroxysuccinimide ester (NHS), aldehyde (CHO), and isocyanate (NCO)) arms of the multiarmed polymers. The more arms, the higher the adhesion strength. For example, the adhesion strength in binding cut rat skin increased from 2.3 N cm^-2 for 2PCL-NHS to 11.2 N cm^-2 for 8-PCL-NHS. CHO- and NCO-modified 8PCL also had suitable adhesive properties. All the multiarmed polymers had minimal cytotoxicity in vitro and good biocompatibility in vivo, suggesting their potential as promising alternative surgical adhesives.