Tuning the Swelling Properties of Smart Multiresponsive Core-Shell Microgels by Copolymerization

Growth of Smart Microgels in a Flow Reactor Scrutinized by In-Line SAXS

In this work, a continuous flow setup for in situ investigation of microgel growth with small-angle X-ray scattering (SAXS) is established. Poly(N-n-propylacrylamide) (PNNPAM) and poly(N-isopropylacrylamide) (PNIPAM) microgels are synthesized in H2O at different residence times inside a continuous flow reactor. The microgels are investigated by in situ SAXS and ex situ photon correlation spectroscopy. The size of the microgels was found to be reproducible in independent experiments with run times of up to 7 h. Already the scattering curves of the microgels with a time of residence of 15 min show a well-defined form factor. Further analysis of the scattering profiles confirms the spherical shape of the microgels. At a residence time of 2 min, the scattering intensity is significantly lower corresponding to a smaller particle size. The experimental conditions remain constant over time, which is crucial for long-time experiments. The PNNPAM system is found to be more suitable for the flow reactor experiment with in-line SAXS as it shows less polymer deposition in the tubing and forms particles with lower polydispersity. The presented reactor is characterized by a compact design and offers a plug-and-play setup close to the sample environment. This work paves the way for investigations of microgel growth at e.g. synchrotron X-ray beamlines.

Multifunctional Core-Shell Microgels as Pd-Nanoparticle Containing Nanoreactors With Enhanced Catalytic Turnover

In this work, we present core-shell microgels with tailor-made architecture and properties for the incorporation of palladium nanoparticles. The microgel core consists of poly-N-isopropylacrylamide (PNIPAM) copolymerized with methacrylic acid (MAc) as anchor point for the incorporation of palladium nanoparticles. The microgel shell is prepared by copolymerization of NIPAM and the UV-sensitive comonomer 2-hydroxy-4-(methacryloyloxy)-benzophenone (HMABP). The obtained core-shell architecture was analyzed by means of photon correlation spectroscopy, while the incorporated amount of HMABP was further confirmed via Fourier transform infrared spectroscopy. Subsequently, the microgel system was used for loading with palladium nanoparticles and their size and localization were investigated by transmission electron microscopy. The catalytic activity of the monodisperse palladium nanoparticles was tested by reduction of 4-nitrophenol to 4-aminophenol. The obtained reaction rate constants for the core-shell system showed enhanced activity compared to the Pd-loaded bare core system. Furthermore, it was possible to recycle the catalyst several times. Analysis via transmission electron microscopy revealed, that the incorporated palladium nanoparticles emerged undamaged after the reaction and subsequent purification process since no aggregation or loss in size was observed.

Temperature Controlled Loading and Release of the Anti-Inflammatory Drug Cannabidiol by Smart Microgels

CBD is a promising candidate for treatment of many diseases and plays a major role in the growing trend to produce high-end drugs from natural, renewable resources. In the present work, we demonstrate a way to incorporate the anti-inflammatory drug CBD into smart microgel particles. The copolymer microgels that we chose as carrier systems exhibit a volume phase transition temperature of 39 ∘C, which is just above normal body temperature and makes them ideal candidates for hyperthermia treatment. While a simple loading route of CBD was not successful due to the enormous hydrophobicity of CBD, an alternative route was developed by immersing the microgels in ethanol. Despite the expected loss of thermoresponsive behaviour of the microgel matrix due to the solvent exchange, a temperature-dependent release of CBD was detected by the material, creating an interesting question of interactions between CBD and the microgel particles in ethanol. Furthermore, the method developed for loading of the microgel particles with CBD in ethanol was further improved by a subsequent transfer of the loaded particles into water, which proves to be an even more promising approach due to the successful temperature-dependent release of the drug above the collapse temperature of the microgels.

Importance of pH in Synthesis of pH-Responsive Cationic Nano- and Microgels

While cationic microgels are potentially useful for the transfection or transformation of cells, their synthesis has certain drawbacks regarding size, polydispersity, yield, and incorporation of the cationic comonomers. In this work, a range of poly(N-isopropylacrylamide) (PNIPAM) microgels with different amounts of the primary amine N-(3-aminopropyl)methacrylamide hydrochloride (APMH) as the cationic comonomer were synthesized. Moreover, the pH-value during reaction was varied for the synthesis of microgels with 10 mol% APMH-feed. The microgels were analyzed by means of their size, thermoresponsive swelling behavior, synthesis yield, polydispersity and APMH-incorporation. The copolymerization of APMH leads to a strong decrease in size and yield of the microgels, while less than one third of the nominal APMH monomer feed is incorporated into the microgels. With an increase of the reaction pH up to 9.5, the negative effects of APMH copolymerization were significantly reduced. Above this pH, synthesis was not feasible due to aggregation. The results show that the reaction pH has a strong influence on the synthesis of pH-responsive cationic microgels and therefore it can be used to tailor the microgel properties.

Short oligo(ethylene glycol) chain incorporated thermoresponsive microgels: from structural analysis to modulation of solution properties

Herein, we report synthesis of thermoresponsive poly(N-isopropylaccrylamide) (PNIPAM) microgels with short oligo(ethylene glycol) (OEG) chain comonomers (1 to 4/5 repeating unit) by surfactant-free precipitation copolymerization. The efficient incorporation of the comonomers was confirmed by a complete set of characterization methods viz., FTIR, 1H NMR, TEM, DLS, and viscometry. The structural heterogeneity and the distribution of the comonomers within the microgels were determined by means of 1H high-resolution transverse relaxation magnetization measurements. Interestingly, the incorporation of these short OEG chain comonomers led to the formation of a core-corona structure, in which the comonomers were mainly located in the core of the polymeric network with PNIPAM dangling chains at the microgel periphery. The experimental investigations of deswelling behaviours revealed that the OEG chains allowed precise control over the colloidal properties, including phase transition, particles size, swelling degree and polydispersity of the microgels. The tuneability of these properties that was interpreted in terms of polymeric hydrophobic/hydrophilic balance as well as structural diversity, could be achieved by changing the OEG chain length, comonomer feed and crosslinking density. Further, we found that the microgels with more hydrophilic OEG chains were able to show a higher relative swelling, and the same solid content thus led to a higher viscosity at all temperatures. The OEG chains remarkably improved the colloidal stability of the microgels in electrolyte solutions even at higher temperatures, thereby paving the way for the use of these microgels in a range of applications.

Thermoresponsive, hollow, degradable core-shell nanoparticles for intra-articular delivery of anti-inflammatory peptide

Inflammation following joint trauma contributes to cartilage degradation and progression of post traumatic osteoarthritis (PTOA). Therefore, drug delivery vehicles that deliver effective anti-inflammatory treatments have the potential to prevent PTOA. We have developed solid and hollow, thermoresponsive nanoparticles for the controlled release of our anti-inflammatory MK2-inhibiting (MK2i) peptide for intra-articular injection to halt inflammation that contributes to the advancement of PTOA. This system exploits the thermosensitive characteristic of N-isopropyl acrylamide (NIPAm) to transition phases when passing through its lower critical solution temperature (LCST). The nanoparticles (NPs) swell below the LCST and constrict above it. Non-crosslinked poly(NIPAm) (pNIPAm), held above its LCST, formed hydrophobic cores around which shells composed of NIPAm, degradable crosslinker N, N'-bis (acryloyl) cystamine (BAC), sulfated 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS), and acrylic acid (AAc) were polymerized. Removal of the non-crosslinked pNIPAm cores via diffusion produced thermosensitive, degradable nanoparticles with low density, or hollow, cores. The data presented here revealed low-density, termed hollow, nanoparticles (hNPs) load and release significantly more MK2i than solid nanoparticles (sNPs). Furthermore, drug loading below the LCST of NIPAm results in roughly 2.5 times more therapeutic encapsulation compared to loading particles in their constricted state. Hollow nanoparticles increase drug loading compared to solid nanoparticles, are taken up into chondrocytes within 24 h, cleared from the cells within 6 days, significantly decrease the secretion of the proinflammatory cytokine IL-6, and, via intra-articular injection, are successfully delivered into the joint space of rats. The peptide loaded nanoparticles provide a reproducible platform for intra-articular delivery of therapeutics.

Intelligent Poly(N-Isopropylmethacrylamide) Hydrogels: Synthesis, Structure Characterization, Stimuli-Responsive Swelling Properties, and Their Radiation Decomposition

Poly(N-isopropylmethacrylamide) (p(NiPMAm)) is one of the lesser known homopolymers that has significant potential for designing new "intelligent" materials. The aims of this work were the synthesis a series of cross-linked p(NiPMAm) hydrogels by the free radical polymerization method and the application of gamma-ray radiation for additional cross-linking. The synthesized p(NiPMAm) hydrogels were structurally characterized by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The amount of unreacted monomers was analyzed using high pressure liquid chromatography (HPLC) to evaluate conversion of monomers into polymers. The swelling behavior was monitored in dependence of pH and temperature changes. The previous aim of gamma-ray radiation was the further the cross-linkage of the obtained hydrogel sample in the gelatinous, paste-like state, but the gamma-ray radiation caused decomposition. After absorbing irradiation doses, they transformed into the liquid phase. The results obtained by the gel permeation chromatography (GPC) method indicated that only oligomers and monomers were present in the irradiated liquid material, without molecules with a higher average molar mass, i.e., that the decomposition of the hydrogels occurred. Additionally, the irradiated liquid material was analyzed using the static headspace gas chromatography mass spectrometry (HSS-GC/MS) and gas chromatography/flame ionization detection (HSS-GC/FID) methods. The presence of unchanged initiator molecule and a dominant amount of four new molecules that were different from homopolymers and the reactant (monomer and cross-linker) were determined.