Potato Starch Hydrogels Produced by High Hydrostatic Pressure (HHP): A First Approach

Structural, physicochemical and functional properties of high-pressure modified white finger millet starch

The effect of high-pressure processing (HPP) modification (200, 400, and 600 MPa for 10 min) on the physico-chemical, functional, structural, and rheological properties of white finger millet starch (WFMS) was studied. Measured amylose content, water, and oil absorption capacity, alkaline water retention, and pasting temperature increased significantly with the intensity of pressure. All color parameters (L, a, b values, and ΔC) were affected by HPP treatment, and paste clarity of modified starch decreased significantly with an increase in storage time. The samples' least gelation concentration (LGC) is in the range of 8-14 %. An increasing solubility and swelling power are noted, further intensifying at the elevated temperature (90 °C). The structural changes of WFMS were characterized by XRD, SEM, and FTIR spectroscopy. Starch modified at 600 MPa showed a similar pattern as 'B'-type crystalline, and the surfaces of starch deformed because of the gelatinization. Applied pressure of 600 MPa affected the FTIR characteristic bands at 3330, 2358, and 997 cm-1, indicating a lower crystallinity of the HPP-600 modified sample. According to DSC analysis, even at 600 MPa, WFMS is only partially gelatinized. This work provides insights for producing modified WFM starches by a novel physical modification method.

Modification of Acorn Starch Structure and Properties by High Hydrostatic Pressure

Despite being rich in starch, over half of acorn production is undervalued. High hydrostatic pressure was used to modify the properties of Q. pyrenaica (0.1 and 460 MPa for 20 min) and Q. robur (0.1 and 333 MPa for 17.4 min) acorn starches to obtain high-valued ingredients. Pressure significantly altered the span distribution and heterogeneity of the acorn starch granules depending on the species, but their morphology was unaffected. Pressurization increased the amylose/amylopectin ratio and damaged starch contents, but the effect was more prominent in Q. pyrenaica than in Q. robur. However, the polymorphism, relative crystallinity, gelatinization temperatures, and enthalpies were preserved. The pressure effect on the starch properties depended on the property and species. The solubility, swelling power, and acorn gels' resistance towards deformation for both species decreased after pressurization. For Q. pyrenaica starch, the in vitro digestibility increased, but the pseudoplastic behavior decreased after pressurization. No differences were seen for Q. robur. Regarding the commercial starch, acorn starches had lower gelatinization temperatures and enthalpies, lower in vitro digestibility, lower resistance towards deformation, superior pseudoplastic behavior, and overall higher solubility and swelling power until 80 °C. This encourages the usage of acorn starches as a new food ingredient.

Cellulose Isolation from Tomato Pomace: Part II-Integrating High-Pressure Homogenization in a Cascade Hydrolysis Process for the Recovery of Nanostructured Cellulose and Bioactive Molecules

This work proposes a biorefinery approach for utilizing tomato pomace (TP) through a top-down deconstructing strategy, combining mild chemical hydrolysis with high-pressure homogenization (HPH). The objective of the study is to isolate cellulose pulp using different combinations of chemical and physical processes: (i) direct HPH treatment of the raw material, (ii) HPH treatment following acid hydrolysis, and (iii) HPH treatment following alkaline hydrolysis. The results demonstrate that these isolation routes enable the production of cellulose with tailored morphological properties from TP with higher yields (up to +21% when HPH was applied before hydrolysis and approximately +6% when applied after acid or after alkaline hydrolysis). Additionally, the side streams generated by this cascade process show a four-fold increase in phenolic compounds when HPH is integrated after acid hydrolysis compared to untreated sample, and they also contain nanoparticles composed of hemicellulose and lignin, as shown by FT-IR and SEM. Notably, the further application of HPH treatment enables the production of nanostructured cellulose from cellulose pulp derived from TP, offering tunable properties. This approach presents a sustainable pathway for the extraction of cellulose and nanocellulose, as well as the valorization of value-added compounds found in residual biomass in the form of side streams.

Fabrication and Characterization of Novel Food-Grade Bigels Based on Interfacial and Bulk Stabilization

Novel food-grade bigels were fabricated using zein nanoparticles for interfacial stabilization and non-surfactant gelators (beeswax and tapioca) for bulk stabilization. The present study demonstrated the importance of interfacial stability for biphasic gels and sheds light on the roles of the gelation mechanism and the oil/water ratio of a bigel on its microstructure, physical properties, and digestion behaviors. The results indicated that it is not an easy task to realize homogenization and subsequent gelation in beeswax-tapioca biphasic systems, as no amphiphilic components existed. However, applying the binding of zein nanoparticles at the oil-water interface allowed us to produce a homogeneous and stable bigel (oil fraction reach 40%), which exhibited enhanced structural and functional properties. Oleogel structures play a crucial role in determining the deformation response of bigel systems. As the oil content increased, the mechanical strength and elastic properties of bigels were enhanced. In the meantime, clear bigel-type transitions were observed. In addition, the fabricated bigels were shown to be beneficial for delayed digestion, and the lowest degree of lipolysis could be found in bigel with 50% oleogel.

A Preliminary Study on the Release of Bioactive Compounds from Rice Starch Hydrogels Produced by High-Pressure Processing (HPP)

This work aimed to carry out a preliminary study on the release of bioactive compounds loaded into starch-based hydrogels produced by high-pressure processing (HPP). As a study case, the experiments were carried out on rice starch HPP hydrogels. Rice starch (20% w/w) and green tea extract (2% w/w), suspended in distilled water, were treated by HPP at processing conditions enabling starch gelatinisation, namely 600 MPa for 15 min at room temperature. Additional experiments were carried out on samples that were further loaded with glycerol (5% w/w). Gel formation was assessed by analysing the gelatinisation extent, structuring level, and swelling power of the samples. At the processing conditions utilised, stable hydrogels were obtained even in the presence of the extract and/or the glycerol in the starch suspension. As expected, the colour of the hydrogels formed was affected by the addition of green tea extract in the starch solution. HPP starch hydrogels were characterised by Fourier transform infrared spectroscopy (FT-IR) to determine the interactions between the different compounds utilised in the formulation. Moreover, the release kinetics of bioactive compounds from HPP rice starch hydrogels was evaluated using a vertical Franz diffusion cells system, simulating a transdermal pattern. The diffusion of bioactive compounds was measured spectrophotometrically and via HPLC analysis. A controlled release of bioactive compounds from the hydrogel structure was detected, suggesting that small molecules, such as polyphenols, positively interacted with the rice starch HPP hydrogel network that allowed a smooth and constant release of these bioactive compounds over time.

The effects of high-pressure treatment on the structure, physicochemical properties and digestive property of starch - A review

High hydrostatic pressure (HHP) is a novel technology used in the food-processing industry. Starch is an important renewable natural resource. The applications of starch are determined by its properties, which in turn are determined by its structure. In this study, the effects of HHP treatment on starch structure (granular structure, crystalline structure, molecular structure, and molecular conformation) and properties (pasting, retrogradation, thermal, digestive, rheological, swelling, solubility, water absorption, and oil absorption properties) are summarised. Additionally, the mechanism of HHP-induced gelatinisation is discussed. First, the strong hydration ability of starch molecules under high pressure facilitates the binding of water molecules to starch molecules via hydrogen bonding. These bound water molecules may block the channels inside the starch granules, leading to the formation of a sealed space. Finally, the granules disintegrate because of the intra/extra pressure difference. This study provides a reference for the application of HHP to starch processing and modification.

Physicochemical, Morphological, and Cytotoxic Properties of Brazilian Jackfruit (Artocarpus heterophyllus) Starch Scaffold Loaded with Silver Nanoparticles

Due to the physical, thermal, and biological properties of silver nanoparticles (AgNPs), as well as the biocompatibility and environmental safety of the naturally occurring polymeric component, polysaccharide-based composites containing AgNPs are a promising choice for the development of biomaterials. Starch is a low-cost, non-toxic, biocompatible, and tissue-healing natural polymer. The application of starch in various forms and its combination with metallic nanoparticles have contributed to the advancement of biomaterials. Few investigations into jackfruit starch with silver nanoparticle biocomposites exist. This research intends to explore the physicochemical, morphological, and cytotoxic properties of a Brazilian jackfruit starch-based scaffold loaded with AgNPs. The AgNPs were synthesized by chemical reduction and the scaffold was produced by gelatinization. X-ray diffraction (XRD), differential scanning calorimetry (DSC), scanning electron microscopy coupled with energy-dispersive spectroscopy (SEM-EDS), and Fourier-transform infrared spectroscopy (FTIR) were used to study the scaffold. The findings supported the development of stable, monodispersed, and triangular AgNPs. XRD and EDS analyses demonstrated the incorporation of silver nanoparticles. AgNPs could alter the scaffold’s crystallinity, roughness, and thermal stability without affecting its chemistry or physics. Triangular anisotropic AgNPs exhibited no toxicity against L929 cells at concentrations ranging from 6.25 × 10−5 to 1 × 10−3 mol·L−1, implying that the scaffolds might have had no adverse effects on the cells. The scaffolds prepared with jackfruit starch showed greater crystallinity and thermal stability, and absence of toxicity after the incorporation of triangular AgNPs. These findings indicate that jackfruit is a promising starch source for developing biomaterials.

Effects of the Amylose/Amylopectin Content and Storage Conditions on Corn Starch Hydrogels Produced by High-Pressure Processing (HPP)

In this study, the effects of the amylose/amylopectin content on starch gelation and the physical characteristics of hydrogels produced by HPP were studied by optical and rheological measurements in steady-state conditions. Additionally, the effects of the storage temperature (4 °C and 20 °C) and type of packaging (plastic bags or sealed Petri dishes) on the physical stability of the hydrogels were evaluated for 30 days of storage by evaluating the shrinkage of the granules, as well as the weight loss, water activity, organoleptic, and rheological properties. The experimental findings suggested that amylose plays an antagonistic role in determining the capacity of the starch granules to absorb water under pressure and to create stable and structured gels and on the physical stability of hydrogels due to its influence over the starch retrogradation extent during storage. Twenty per cent amylose was the minimum concentration to form stable corn starch HPP hydrogels with good physical and rheological properties. Moreover, a storage temperature of 20 °C and the use of polymeric bags were evaluated as the most suitable storage conditions and packaging materials enabling the long storage of corn starch hydrogels.

Effect of Potato Starch Hydrogel:Glycerol Monostearate Oleogel Ratio on the Physico-Rheological Properties of Bigels

Bigel (BG) has been shown to be promising for the food industry due to the possibility to manipulate the properties of the system by adjusting the ratio of each individual phase, namely the hydrogel (H) and oleogel (O) phases. This work aimed to evaluate the influence of the O:H ratio on the physical-rheological properties of BG produced with potato starch (PS) and glycerol monostearate (GM). The hydrogel hardness (i.e., 1423.47 g) directly influenced the viscosity of the BG samples, as BG with a higher H-phase presented the highest viscosity and firmness. All BG samples presented shear-thinning behavior and structural breakdown at ~50 °C. BG with a higher O-phase had superior results for thermal stability, softer texture, and yield stress values, representative of good plasticity and spreadability, as compared to BG with less O-phase. The BG with 80% H-phase was less stable during the 21 days of storage in relation to the other BG samples. This study showed the role that the O:H ratio plays in the development of PS-GM-based BGs with tailor-made physical-rheological properties. In addition, the BG is an easily reproduced system with great potential to be used as a trans and saturated fat substitute in food applications.

3D-printing of oxidized starch-based hydrogels with superior hydration properties

High-hydration hydrogels based on carbohydrate polymers and green preparation methods have attracted intensive research focus recently. Driven by the attractive functions of starch, oxidized maize starch (OMS) was chosen and the related hydrogel (3D-OMS) was constructed by hot-extrusion 3D printing (HE-3DP). Meanwhile, the effect of different OMS concentrations (11 %-19 %) on its printability, structure and hydration properties were systematically investigated. The results showed that the formation of porous structure during HE-3DP environment contributed to rapid water absorption and well water holding capacity of 3D-OMS. Interestingly, as the OMS concentration increased from 11 % to 19 %, the 3D-OMS presented great hydration properties, with its maximum water absorption capacity and water holding capacity reaching 3013.43 % (11-OMS) and 93.53 % (19-OMS), respectively. Among them, 13 % was the best concentration for HE-3DP. Besides, 3D-OMS also exhibited good biodegradability and cytocompatibility. These results demonstrated potential for developing new starch-based biomedical hydrogel with great hydration properties through HE-3DP technology.

Evaluation of the Physical Stability of Starch-Based Hydrogels Produced by High-Pressure Processing (HPP)

Starch-based hydrogels are natural polymeric structures with high potential interest for food, cosmeceutical, and pharmaceutical applications. In this study, the physical stability of starch-based hydrogels produced via high-pressure processing (HPP) was evaluated using conventional and accelerated methods. For this purpose, conventional stability measurements, namely swelling power, water activity, texture, and organoleptic properties, as well as microbiological analysis of rice, corn, wheat, and tapioca starch hydrogels, were determined at different time intervals during storage at 20 °C. Additionally, to assess the stability of these structures, accelerated tests based on temperature sweep tests and oscillatory rheological measurements, as well as temperature cycling tests, were performed. The experimental results demonstrated that the physical stability of starch-based HPP hydrogels was interdependently affected by the microorganisms’ action and starch retrogradation, leading to both organoleptic and texture modifications with marked reductions in swelling stability and firmness. It was concluded that tapioca starch hydrogels showed the lowest stability upon storage due to higher incidence of microbial spoilage. Accelerated tests allowed the good stability of HPP hydrogels to be predicted, evidencing good network strength and the ability to withstand temperature changes. Modifications of the rheological properties of corn, rice, and wheat hydrogels were only observed above 39 °C and at stress values 3 to 10 times higher than those necessary to modify commercial hydrogels. Moreover, structural changes to hydrogels after cycling tests were similar to those observed after 90 days of conventional storage. Data obtained in this work can be utilized to design specific storage conditions and product improvements. Moreover, the accelerated methods used in this study provided useful information, allowing the physical stability of starch-based hydrogels to be predicted.

Cellulose Isolation from Tomato Pomace Pretreated by High-Pressure Homogenization

This work proposes a biorefinery approach for the utilization of agri-food residues, such as tomato pomace (TP), through combining chemical hydrolysis with high-pressure homogenization (HPH), aiming to achieve the isolation of cellulose with tailored morphological properties from underused lignocellulose feedstocks, along with the valorization of the value-added compounds contained in the biomass. Cellulose was isolated from TP using sequential chemical hydrolysis in combination with mechanical pretreatment through HPH. The chemical and structural features of cellulose isolated from TP pretreated by HPH were compared with cellulose isolated from untreated TP through light scattering for particle size distribution, optical and scanning electron microscopy, and Fourier-transform infrared spectroscopy (FT-IR) analysis. HPH pretreatment (80 MPa, 10 passes) not only promoted a slight increase in the yield of cellulose extraction (+9%) but contributed to directly obtaining defibrillated cellulose particles, characterized by smaller irregular domains containing elongated needle-like fibers. Moreover, the selected mild chemical process produced side streams rich in bioactive molecules, evaluated in terms of total phenols and reducing activity. The liquors recovered from acid hydrolysis of TP exhibited a higher biological activity than those obtained through a conventional extraction (80% v/v acetone, 25 °C, 24 h at 180 rpm).

Effect of starch concentration and resistant starch filler addition on the physical properties of starch hydrogels

Corn starch-based hydrogels are safe and biodegradable polymers with a wide array of applications in food science. The aim of this study was to investigate the effects of starch and natural filler resistant starch type 2 (RS2) particles concentration on the textural properties of corn starch hydrogels. Native starch (NS) hydrogels of 8%, 10%, 12%, and 15% w/v were prepared; in each of these dispersions, part of the NS was substituted with RS2 to a concentration of 2% or 10%. NS hydrogels with the highest concentrations had the maximum hardness, cohesiveness, and gumminess values, whereas the addition of RS2 particles did not affect gel textural properties. Native and substituted RS2 hydrogels showed close similarities in their rheological and textural characteristics. Water-holding capacity greatly decreased with increasing starch concentration, suggesting that the hydrogels with the highest NS concentration had the densest network as depicted by SEM micrographs. Subsequently, hardness, gumminess, and consistency coefficient were linearly correlated to starch concentration and storage time. Fluid release was exponentially dependent on starch concentration. The degree of crystallinity by X-ray diffraction (XRD) indicated that by increasing starch concentration and substitution level, crystallinity increased. Consequently, NS concentration determined the textural properties of corn starch hydrogels. On the other hand, RS2 substitutions did not affect any of these parameters, indicating their potential role as inactive fillers with a beneficial effect on the maintenance of normal blood glucose levels. Therefore, the consistency of a food gel can be optimized by changing the ratio of inactive filler to starch gel matrix.

Effects of ultra-high pressure on the morphological and physicochemical properties of lily starch

In this study, starch extracted from lily bulbs were modified using an ultra-high pressure (UHP) treatment at six different pressure levels (100, 200, 300, 400, 500, and 600 MPa). The effects of UHP treatment on the physicochemical and morphological properties of lily starch were investigated. The morphological observation revealed that UHP treatment led to particle expansion and aggregation. Compared with the native and lily starch treated at 100-500 MPa, the lily starch treated at 600 MPa exhibited almost completely disrupted morphology and a larger particle size, indicating nearly complete gelatinization of the starch. The relative crystallinity of the UHP-treated starch remarkably reduced. Gelatinization temperatures via differential scanning calorimetry decreased with increasing pressure. The rapid viscoanalyzer results revealed that the lily starch treated with UHP at 600 MPa showed low values of peak viscosity, trough viscosity, breakdown, final viscosity, and setback. These results indicated that UHP was an effective physical modification method for lily starch, UHP treatment (600 MPa, 30 min) caused nearly complete gelatinization of lily starch, and lily starch modified using UHP might expand the application of lily in the food field.