Electrochromic Self-Electrostabilized Polypyrrole Films Doped with Surfactant and Azo Dye

Enhanced enzymatic electrochemical detection of an organophosphate Pesticide: Achieving Wide linearity and femtomolar detection via gold nanoparticles growth within polypyrrole films

The indiscriminate use of pesticides in agriculture demands the development of devices capable of monitoring contaminations in food supplies, in the environment and biological fluids. Simplicity, easy handling, high sensitivities, and low limits-of-detection (LOD) and quantification are some of the required properties for these devices. In this work, we evaluated the effect of incorporating gold nanoparticles into indigo carmine-doped polypyrrole during the electropolymerization of films for use as an acetylcholinesterase (AChE) enzyme-based biosensor. As proof of concept, the pesticide methyl parathion was tested towards the inhibition of AChE. The enzyme was immobilized simply by drop-casting a solution, eliminating the need for any prior surface modification. The biosensors were characterized with cyclic voltammetry, scanning electron microscopy, transmission electron microscopy, and Raman spectroscopy. The assays for the detection of methyl parathion with films containing polypyrrole, indigo carmine and AChE (PPy-IC-AChE) presented a sensitivity of 5.7 μA cm-2 g-1 mL and a LOD of 12 nmol L-1 (3.0 ng L-1) with a linear range from 1.3 x 10-7 mol L-1 to 1.0 x 10-5 mol L-1. The introduction of gold nanoparticles (AuNP) into the film (PPy-IC-AuNP-AChE) led to remarkable improvements on the overall performance, such as a lower redox potential for the enzymatic reaction, a 145 % increase in sensitivity (14 μA cm-2 g-1 mL), a wider detection dynamic range (from 1.3x10-7 to 1.0x10-3 mol L-1), and a very low LOD of 24 fmol L-1 (64 ag mL-1). These findings underscore the potential of using AuNPs to improve the enzymatic performance of biosensor devices.

Synthesis and characterization of enhanced azo-azomethine doped PANI/HCl conducting polymers for electrochemical applications

In this study, conducting polymers composed of polyaniline hydrochloric acid (PANI/HCl) with varying concentrations of a newly synthesized azo-azomethine dye (4-(((Z)-2-hydroxy-5-((Z)-(4-hydroxyphenyl)diazenyl)-3-methoxybenzylidene)amino)benzoic acid) were synthesized using a chemical oxidative polymerization technique. The synthesized azo-azomethine was characterized by FTIR, 1H-NMR, 13C-NMR, and HRMS. The effects of varying the concentration of the dopant azo-azomethine in PANI/HCl on its optical, structural, thermal, and electrical properties were examined using FTIR, UV-Vis, XRD, FESEM, TEM, cyclic voltammetry, and electrical impedance spectra. The results indicate that the optical, direct, and indirect band gaps of the doped polymers decreased from 4.48 and 3.96 eV to 3.91 and 2.49 eV, respectively. The crystalline structure and phase transitions in the doped polymers were examined using X-ray diffraction. Cyclic voltammetry demonstrated that the doped polymers exhibited higher electrochemical conductivity compared to the pure polymer, with the specific capacitance increasing from 161.17 to 816.9 F/g. The electrical impedance spectra revealed the bulk resistance and conductivity of the material. Among all the doped polymers, PANI/HCl with an azo-azomethine concentration of 5 × 10-5 M exhibited lower bulk resistance (10 Ω) and higher electrical conductivity (σ = 50.09 × 10-3 S cm-1).

Chlorpromazine-Polypyrrole Drug Delivery System Tailored for Neurological Application

Nowadays, drug delivery systems (DDSs) are gaining more and more attention. Conducting polymers (CPs) are efficiently used for DDS construction as such systems can be used in therapy. In this research, a well-known CP, polypyrrole (PPy), was synthesized in the presence of the polysaccharide heparin (HEP) and chlorpromazine (CPZ) using sodium dodecyl sulfate (SDS) as electrolyte on a steel substrate. The obtained results demonstrate the successful incorporation of CPZ and HEP into the polymer matrix, with the deposited films maintaining stable electrochemical parameters across multiple doping/dedoping cycles. Surface roughness, estimated via AFM analysis, revealed a correlation with layer thickness-decreasing for thinner layers and increasing for thicker ones. Moreover, SEM images revealed a change in the morphology of PPy films when PPy is electropolymerized in the presence of CPZ and HEP, while FTIR confirmed the presence of CPZ and HEP within PPy. Due to its lower molecular mass compared to HEP, CPZ was readily integrated into the thin polymer matrix during deposition, with diffusion being unimpeded, as opposed to films with greater thickness. Finally, the resulting system exhibited the ability to release CPZ, enabling a dosing range of 10 mg to 20 mg per day, effectively covering the therapeutic concentration range.

The Alphabet of Nanostructured Polypyrrole

This review is devoted to polypyrrole and its morphology, which governs the electroactivity of the material. The macroscopic properties of the material are strictly relevant to microscopic ordering observed at the local level. During the synthesis, various (nano)morphologies can be produced. The formation of the ordered structure is dictated by the ability of the local forces and effects to induce restraints that help shape the structure. This review covers the aspects of morphology and roughness and their impact on the final properties of the modified electrode activity in selected applications.

Smart Design of Sensor-Coated Surgical Sutures for Bacterial Infection Monitoring

Virtually, all implantable medical devices are susceptible to infection. As the main healthcare issue concerning implantable devices is the elevated risk of infection, different strategies based on the coating or functionalization of biomedical devices with antiseptic agents or antibiotics are proposed. In this work, an alternative approach is presented, which consists of the functionalization of implantable medical devices with sensors capable of detecting infection at very early stages through continuous monitoring of the bacteria metabolism. This approach, which is implemented in surgical sutures as a representative case of implantable devices susceptible to bacteria colonization, is expected to minimize the risk of worsening the patient's clinical condition. More specifically, non-absorbable polypropylene/polyethylene (PP/PE) surgical sutures are functionalized with conducting polymers using a combination of low-pressure oxygen plasma, chemical oxidative polymerization, and anodic polymerization, to detect metabolites coming from bacteria respiration. Functionalized suture yarns are used for real-time monitoring of bacteria growth, demonstrating the potential of this strategy to fight against infections.

New PEDOT Derivatives Electrocoated on Silicon Nanowires Protected with ALD Nanometric Alumina for Ultrastable Microsupercapacitors

This work deals with electroactive conducting polymers (ECPs) used as a complementary component on purely capacitive silicon nanowires protected by a 3 nm alumina layer. Accordingly, in this work, we use a fast and simple deposition method to create a pseudocapacitive material based on the electropolymerization in aqueous micellar media (SDS and SDBS 0.01 M) of hydroxymethyl-EDOT (EDOT-OH) onto 3 nm alumina-coated silicon nanowires (Al₃@SiNWs). The composite material displays remarkable capacitive behavior with a specific capacitance of 4.75 mF·cm^-2 at a current density of 19 µA·cm^-2 in aqueous Na₂SO₄ electrolyte.

Spectroelectrochemistry of Electroactive Polymer Composite Materials

In this review, we have summarized the main advantages of the method of spectroelectrochemistry as applied to recent studies on electrosynthesis and redox processes of electroactive polymer composite materials, which have found wide application in designing organic optoelectronic devices, batteries and sensors. These polymer composites include electroactive polymer complexes with large unmovable dopant anions such as polymer electrolytes, organic dyes, cyclodextrins, poly(β-hydroxyethers), as well as polymer-inorganic nanocomposites. The spectroelectrochemical methods reviewed include in situ electron absorption, Raman, infrared and electron spin resonance spectroscopies.

Photothermal-Irradiated Polyethyleneimine-Polypyrrole Nanopigment Film-Coated Polyethylene Fabrics for Infrared-Inspired with Pathogenic Evaluation

Influenza, pneumonia, and pathogenic infection of the respiratory system are boosted in cold environments. Low temperatures also result in vasoconstriction, restraint of blood flow, and decreased oxygen to the heart, and the risk of a heart attack would increase accordingly. The present face mask fabric fails to preserve its air-filtering function as its electrostatic function vanishes once exposed to water. Therefore, its filtering efficacy would be decreased meaningfully, making it nearly impracticable to reuse the disposable face masks. The urgent requirement for photothermal fabrics is also rising. Nanobased polyethyleneimine-polypyrrole nanopigments (NPP NPs) have been developed and have strong near-infrared spectrum absorption and exceptional photothermal convertible performance. Herein, the mask fabric used PE-fiber-constructed membrane (PEFM) was coated by the binding affinity of the cationic polyethyleneimine component of NPP NPs forming NPP NPs-PEFM. To the best of our knowledge, no study has investigated NPP NP-coated mask fabric to perform infrared red (solar or body) photothermal conversion efficacy to provide biocompatible warming, remotely photothermally captured antipathogen, and antivasoconstriction in vivo. This pioneering study showed that the developed NPP NPs-PEFM could be washable, reusable, breathable, biocompatible, and photothermal conversable for active eradication of pathogenic bacteria. Further, it possesses warming preservation and antivasoconstriction.