DFT Modeling of Organocatalytic Ring-Opening Polymerization of Cyclic Esters: A Crucial Role of Proton Exchange and Hydrogen Bonding

Computational evaluation of zirconocene catalysts for ε-caprolactone cationic ring-opening polymerization

This quantum chemical study presents the ligand effect and a structure-property relationship in the cationic ring-opening polymerization (CROP) of ε-caprolactone using zirconocene catalysts. We first examined the effects of catalyst structure on the initiation and chain propagation steps of the CROP process. A total of 54 catalyst structures were investigated to understand the influence of the ligand structure on the stability of the catalyst-monomer complex and polymerization activity. The properties of the catalysts were analyzed in terms of ancillary ligands, ligand substituents, and bridging units. Calculations showed that the polymerization follows a proposed cationic mechanism, with ring opening occurring via alkyl-bond cleavage. A correlation between complex stability and activation energy was also observed, with ligand substituents dominating in both steps. While the ancillary ligands directly affect the HOMO energy level, the bridges are mainly responsible for the catalyst geometries, resulting in reduced complex stability and higher activation energy for the propagation step. This study contributes to a better understanding of the structural characteristics of zirconocene catalysts, which offers guidance for improving CROP activities in lactone polymerization.

Ring-Opening Polymerization of Trimethylene Carbonate with Phosphazene Organocatalyst

Aliphatic polycarbonate (APC) compounds are an important class of biodegradable materials with excellent biocompatibility, good biodegradability, and low toxicity, and the study of these compounds and their modification products aims to obtain biodegradable materials with better performance. In this context, the ring-opening polymerization (ROP) of trimethylene carbonate (TMC) from a low nucleophilic organic superbase of phosphazene (t-BuP₄) as a catalyst and benzyl alcohol (BnOH) as an initiator at room temperature was carefully studied to prepare poly(trimethylene carbonate) (PTMC) which is one of the most studied APC. ¹H NMR and SEC measurements clearly demonstrate the presence of a benzyloxy group at the α-terminus of the obtained PTMC homopolymers while investigation of the polymerization kinetics confirms the controlled/living nature of t-BuP₄-catalyzed ROP of TMC. On the basis of this, the block copolymerization of TMC and δ-valerolactone (VL)/ε-caprolactone (CL) was successfully carried out to give PTMC-b-PCL and PTMC-b-PVL copolymers. Furthermore, PTMC with terminal functionality was also prepared with the organocatalytic ROP of TMC through functional initiators. We believe that the present ROP system is a robust, highly efficient, and practical strategy for producing excellent biocompatible and biodegradable PTMC-based materials.

DFT Investigations on the Ring-Opening Polymerization of Trimethylene Carbonate Catalysed by Heterocyclic Nitrogen Bases

Organocatalysts for polymerization have known a huge interest over the last two decades. Among them, heterocyclic nitrogen bases are widely used to catalyse the ring-opening polymerization (ROP) of heterocycles such as cyclic carbonates. We have investigated the ring-opening polymerization of trimethylene carbonate (TMC) catalysed by DMAP (4-dimethylaminopyridine) and TBD (1,5,7-triazabicyclo[4.4.0]dec-5-ene) as case studies in the presence of methanol as co-initiator by Density Functional Theory (DFT). A dual mechanism based on H-bond activation of the carbonyl moieties of the monomer and a basic activation of the alcohol co-initiator has been shown to occur more preferentially than a direct nucleophilic attack of the carbonate monomer by the heterocyclic nitrogen catalyst. The rate-determining step of the mechanism is the ring opening of the TMC molecule, which is slightly higher than the nucleophilic attack of the TMC carbonyl by the activated alcohol. The calculations also indicate TBD as a more efficient catalyst than DMAP. The higher energy barrier found for DMAP vs. TBD, 23.7 vs. 11.3 kcal·mol−1, is corroborated experimentally showing a higher reactivity for the latter.

Development of Biodegradable Polyesters: Study of Variations in Their Morphological and Thermal Properties through Changes in Composition of Alkyl-Substituted (ε-DL) and Non-Substituted (ε-CL, EB, L-LA) Monomers

Three series of polyesters based on monomer combinations of ε-caprolactone (ε-CL), ethylene brassylate (EB), and l-Lactide (LLA) with the alkyl substituted lactone ε-decalactone (ε-DL) were synthesized at different molar ratios. Copolymers were obtained via ring opening polymerization (ROP) employing TBD (1,5,7-triazabicyclo-[4.4.0]-dec-5-ene), an organic catalyst which can be handled under normal conditions, avoiding the use of glove box equipment. The molar monomer composition of resulting copolymers differed from theoretical values due to lower ε-DL reactivity; their M_n and M_w values were up to 14 kDa and 22.8 kDa, respectively, and distributions were (Ɖ) ≤ 2.57. The thermal stability of these materials suffered due to variations in their ε-DL molar content. Thermal transitions such as melting (T_m) and crystallization (T_c) showed a decreasing tendency as ε-DL molar content increased, while glass transition (T_g) exhibited minor changes. It is worth mentioning that changes in monomer composition in these polyesters have a strong impact on their thermal performance, as well as in their crystallization degree. Consequently, variations in their chemical structure may have an effect on hydrolyic degradation rates. It should be noted that, in future research, some of these copolymers will be exposed to hydrolytic degradation experiments, including characterizations of their mechanical properties, to determine their adequacy in potential use in the development of soft medical devices.

Activated Monomer Mechanism (AMM) in Cationic Ring-Opening Polymerization. The Origin of the AMM and Further Development in Polymerization of Cyclic Esters

The origin of the activated monomer mechanism (AMM) in cationic ring-opening polymerization (CROP) is described first. Then, conditions leading to the active chain end (ACE) mechanism and AMM are compared, as well as methods allowing to distinguish between these two mechanisms. These methods are based on the "ion trapping" of the active ionic species using highly basic phosphines or by comparing ACE and AMM kinetics of polymerization. The major factors deciding on the actual mechanism include: basicity of the monomers, ring strain, and the presence of the protic additives in the reaction system. These factors are tabulated for major cyclic ethers and cyclic esters. The historically evolved subsequent steps of AMM in the polymerization of cyclic esters are described: from the first experiments with trialkyloxonium salts, precursors of protonic acids, and added alcohols, via HCl as catalyst, and then CF₃S(═O)₂OH (polymerizing lactides) to the most popular derivatives of phosphoric acid, like diphenyl phosphate. Conditions allowing to synthesize poly(ε-caprolactone) (PCL), according to AMM-CROP, with molar mass up to 10⁵ g·mol^-1, are described as well as methods to polymerize CL with a protic initiator and acidic catalyst in one molecule. Then various methods enhancing the activity of the polymerizing systems are compared, based predominantly on hydrogen bonding, either to the polymer active end group (usually the hydroxyl group) or to the acid anion. Finally, kinetic equations for ACE and AMM are compared, and it is shown that the majority of the AMM-CROP systems, mostly studied for CL and lactides, proceed as living/controlled polymerizations. Since polymer end groups are hydroxyl groups, then, as it was shown in several papers, any initiator with one or many hydroxyl groups provides macromolecules with the corresponding architecture. The papers on synthetic methods are not discussed in detail.

Stereoelectronic power of oxygen in control of chemical reactivity: the anomeric effect is not alone

Although carbon is the central element of organic chemistry, oxygen is the central element of stereoelectronic control in organic chemistry. Generally, a molecule with a C-O bond has both a strong donor (a lone pair) and a strong acceptor (e.g., a σ*_C-O orbital), a combination that provides opportunities to influence chemical transformations at both ends of the electron demand spectrum. Oxygen is a stereoelectronic chameleon that adapts to the varying situations in radical, cationic, anionic, and metal-mediated transformations. Arguably, the most historically important stereoelectronic effect is the anomeric effect (AE), i.e., the axial preference of acceptor groups at the anomeric position of sugars. Although AE is generally attributed to hyperconjugative interactions of σ-acceptors with a lone pair at oxygen (negative hyperconjugation), recent literature reports suggested alternative explanations. In this context, it is timely to evaluate the fundamental connections between the AE and a broad variety of O-functional groups. Such connections illustrate the general role of hyperconjugation with oxygen lone pairs in reactivity. Lessons from the AE can be used as the conceptual framework for organizing disjointed observations into a logical body of knowledge. In contrast, neglect of hyperconjugation can be deeply misleading as it removes the stereoelectronic cornerstone on which, as we show in this review, the chemistry of organic oxygen functionalities is largely based. As negative hyperconjugation releases the "underutilized" stereoelectronic power of unshared electrons (the lone pairs) for the stabilization of a developing positive charge, the role of orbital interactions increases when the electronic demand is high and molecules distort from their equilibrium geometries. From this perspective, hyperconjugative anomeric interactions play a unique role in guiding reaction design. In this manuscript, we discuss the reactivity of organic O-functionalities, outline variations in the possible hyperconjugative patterns, and showcase the vast implications of AE for the structure and reactivity. On our journey through a variety of O-containing organic functional groups, from textbook to exotic, we will illustrate how this knowledge can predict chemical reactivity and unlock new useful synthetic transformations.

Functionalized Biodegradable Polymers via Termination of Ring-Opening Polymerization by Acyl Chlorides

Aliphatic polyesters are an important class of polymeric materials for biomedical applications due to their versatile and tunable chemistry, biocompatibility and biodegradability. A capability of direct bonding with biomedically significant molecules, provided by the presence of the reactive end functional groups (FGs), is highly desirable for prospective polymers. Among FGs, N-hydroxysuccinimidyl activated ester group (NHS) and maleimide fragment (MI) provide efficient covalent bonding with -NH- and -SH containing compounds. In our study, we found that NHS- and MI-derived acyl chlorides efficiently terminate living ring-opening polymerization of ε-caprolactone, L-lactide, ethyl ethylene phosphonate and ethyl ethylene phosphate, catalyzed by 2,6-di-tert-butyl-4-methylphenoxy magnesium complex, with a formation of NHS- and MI-functionalized polymers at a high yields. Reactivity of these polymers towards amine- and thiol-containing model substrates in organic and aqueous media was also studied.

Cyclic ethylene phosphates with (CH2)nCOOR and CH2CONMe2 substituents: synthesis and mechanistic insights of diverse reactivity in aryloxy-Mg complex-catalyzed (co)polymerization

Herein we present a comparative study of the reactivity of ethylene phosphates with –O(CH2)nCOOMe (n = 1–3, 5), –CH2COOtBu, –OCHMeCOOMe, and –OCH2CONMe2 substituents in BHT-Mg catalyzed ROP.

DBU and TU synergistically induced ring-opening polymerization of phosphate esters: a mechanism study

Biocompatible and biodegradable polyphosphoesters derived from the ring-opening polymerization (ROP) of phosphate esters have drawn increasing attention because of their potential applications in clinical and therapeutic fields.

Runge–Kutta analysis for optimizing the Zn-catalyzed transesterification conditions of MA and MMA with diols to maximize monoesterified products

Terminal hydroxylated acrylate derivatives were prepared by transesterification using zinc catalyst. The time to reach the equilibrium state was analyzed by curve-fitting analysis based on the Runge–Kutta method for optimizing the best conditions.

Comparative Experimental and Theoretical Study of Mg, Al and Zn Aryloxy Complexes in Copolymerization of Cyclic Esters: The Role of the Metal Coordination in Formation of Random Copolymers

Homogeneity of copolymers is a general problem of catalytic coordination polymerization. In ring-opening polymerization of cyclic esters, the rational design of the catalyst is generally applied to solve this problem by the equalization of the reactivities of comonomers-however, it often leads to a reduction of catalytic activity. In the present paper, we studied the catalytic behavior of BnOH-activated complexes (ВНТ)Mg(THF)2nBu (1), (ВНТ)2AlMe (2) and [(ВНТ)ZnEt]2 (3), based on 2,6-di-tert-butyl-4-methylphenol (BHT-H) in homo- and copolymerization of L-lactide (lLA) and ε-caprolactone (εCL). Even at 1:5 lLA/εCL ratio Mg complex 1 catalyzed homopolymerization of lLA without involving εCL to the formation of the polymer backbone. On the contrary, Zn complex 3 efficiently catalyzed random lLA/εCL copolymerization; the presence of mono-lactate subunits in the copolymer chain clearly pointed to the transesterification mechanism of copolymer formation. Both epimerization and transesterification side processes were analyzed using the density functional theory (DFT) modeling that confirmed the qualitative difference in catalytic behavior of 1 and 3: Mg and Zn complexes demonstrated different types of preferable coordination on the PLA chain (k2 and k3, respectively) with the result that complex 3 catalyzed controlled εCL ROP/PLA transesterification, providing the formation of lLA/εCL copolymers that contain mono-lactate fragments separated by short oligo(εCL) chains. The best results in the synthesis of random lLA/εCL copolymers were obtained during experiments on transesterification of commercially available PLLA, the applicability of 3/BnOH catalyst in the synthesis of random copolymers of εCL with methyl glycolide, ethyl ethylene phosphonate and ethyl ethylene phosphate was also demonstrated.

Stereoselective ROP of rac- and meso-Lactides Using Achiral TBD as Catalyst

1,5,7-Triazabicyclo[4.4.0]dec-5-ene (TBD) polymerizes rac-lactide (rac-LA) to form highly isotactic polylactide (PLA) with a Pm = 0.88, while meso-LA yields heterotactic PLA (Pm ~ 0.8) at −75 °C. The stereocontrol of the cryogenic-based ring-opening polymerization comes from a perfect imbrication of both chiral LA and the propagating chiral end-group interacting with the achiral TBD catalyst.

Substituted glycolides from natural sources: preparation, alcoholysis and polymerization

Herein we present a comparative study of substituted glycolides MeGL, iPrGL, iBuGL, BnGL, PhGL and MePhGL, synthesized from natural sources and polymers therefrom.