Structure and Properties of PSf Hollow Fiber Membranes with Different Molecular Weight Hyperbranched Polyester Using Pentaerythritol as Core

Effects of the Applied Potential on the Performance of Polysulfone Membranes Functionalized with Sulfonated Polyether Ether Ketone Polymers

The global water crisis growth has led to a tremendous increase in membrane technology research. Membranes are favored over many other technologies for water treatment because, in principle, they require no chemical additives and can be used isothermally at low temperatures. Membranes that can reject contaminants and salts, produce adequate permeate flux values, and require minimal cleaning are highly demanded. However, most synthesized membranes on the market have associated problems, such as membrane fouling; inverse relationships between flux and solute rejection; and the high cost of synthesis, operation, and maintenance. Therefore, there is a continuied need to produce membranes with properties that make them able to sustain flux and selectivity over time. This research study focused on increasing the surface charge and hydrophilicity of polysulfone (PSf) membranes by incorporating sulfonate-functionalized poly-ether-ether-ketone (SPEEK) into PSf/N-Methyl-2-pyrrolidone (PSf/NMP) membranes. The sulfonation of the PEEK provided a net increase in negative charge on the surface of the membranes that enabled charge repulsion to take place, thus increasing the rejection of ions. In this project, the effect of the applied potential on the performance of SPEEK: PSf/NMP membranes was evaluated. The characterization of the as-synthesized membranes was carried out using the surface's structure and morphology, contact angle, and zeta potential. Furthermore, a voltage of 1.5 V was applied to the membranes in the presence of various salts (sodium chloride, calcium chloride, and potassium chloride salts) to evaluate the effects of the applied potential on solute rejection. It was found that both the permeability and the selectivity of the membranes increased when the voltage was applied. The obtained results indicate that incorporating SPEEK into PSf/NMP membranes increased the hydrophilicity of the membranes, and under the applied voltage, the incorporation allowed it to function as an electrodialysis process that is capable of removing ions from water bodies by utilizing the charge repulsion of ions.

Impact of Silver-Decorated Graphene Oxide (Ag-GO) towards Improving the Characteristics of Nanohybrid Polysulfone Membranes

The utilization of membranes has been extensively employed in the treatment of water and wastewater. Membrane fouling, attributed to the hydrophobic nature of membranes, constitutes a noteworthy concern in the realm of membrane separation. The mitigation of fouling can be achieved through the modification of membrane characteristics, including but not limited to hydrophilicity, morphology, and selectivity. In this study, a nanohybrid polysulfone (PSf) membrane embedded with silver-graphene oxide (Ag-GO) was fabricated to overcome problems related to biofouling. The embedment of Ag-GO nanoparticles (NPs) is the aim towards producing membranes with antimicrobial properties. The fabricated membranes at different compositions of NPs (0 wt%, 0.3 wt%, 0.5 wt%, and 0.8 wt%) are denoted as M0, M1, M2, and M3, respectively. These PSf/Ag-GO membranes were characterized using FTIR, water contact angle (WCA) goniometer, FESEM, and salt rejection. The additions of GO significantly improved the hydrophilicity of PSf membranes. An additional OH peak at 3380.84 cm^-1 of the nanohybrid membrane from FTIR spectra may be related to hydroxyl (-OH) groups of GO. The WCA of the fabricated membranes decreased from 69.92° to 54.71°, which confirmed the improvement in its hydrophilicity. In comparison to the pure PSf membrane, the morphology of the finger-like structure of the fabricated nanohybrid membrane slightly bent with a larger bottom part. Among the fabricated membranes, M2 achieved the highest iron (Fe) removal, up to 93%. This finding proved that the addition of 0.5 wt% Ag-GO NPs enhanced the membrane water permeability together with its performance of ionic solute removal (Fe²⁺) from synthetic groundwater. In conclusion, embedding a small amount of Ag-GO NPs successfully improved the hydrophilicity of PSf membranes and was able to achieve high removal of Fe at 10-100 mg L^-1 towards purification of groundwater for safe drinking water.