Thermosensitive Hydrogel for Encapsulation and Controlled Release of Biocontrol Agents to Prevent Peanut Aflatoxin Contamination

Preparation and characterization of chitosan/ZnO-Ag composite microcapsules and their applications in solar energy harvesting and electromagnetic interference shielding

Phase change microcapsules are known for their latent heat storage capability. However, the efficient absorption and utilization of solar energy by these microcapsules remains a significant challenge. In this study, we successfully prepared composite phase change microcapsules containing ZnO-Ag nanospheres, chitosan, and paraffin. These microcapsules demonstrated remarkable photothermal conversion efficiency. ZnO was found to effectively absorb ultraviolet light, while the plasmonic resonance of Ag was utilized to absorb and make use of light energy in the visible region. Moreover, due to the synergistic absorption and reflection of electromagnetic waves by ZnO-Ag nanoparticles and graphene, the well-dispersed chitosan/ZnO-Ag composite microcapsules and graphene in the fabric coating demonstrated exceptional electromagnetic shielding performance. In addition, the coated fabric based on composite microcapsules exhibited excellent antibacterial properties, effectively inhibiting the growth of bacteria such as S. aureus and E. coli. This antibacterial performance adds to their potential applications in various fields. These multifunctional phase change microcapsules offer vast potential for the effective utilization of solar energy, serving as efficient photothermal conversion and energy storage materials.

Preparation of sodium alginate/Cur-PLA hydrogel beads for curcumin encapsulation

The low bioavailability of hydrophobic compounds, however, limits their medicinal use. Hydrogel beads made of biopolymers can be employed as controlled delivery systems and as a carrier to carry curcumin molecules. In this study, encapsulation of curcumin is done within the hydrogel by using Polylactic acid. The prepared SA/Cur-PLA and SA/Cur beads were examined using FTIR, SEM, TGA, NMR, and, XRD to study the interaction between drug and polymer. The developed bead's curcumin encapsulation efficiency was found to be 81.47 % in SA/Cur-PLA. Curcumin's release kinetics have been studied in systems (SGF, pH 1.2, and SCF, pH 7.4) that simulate oral consumption, which possess good pH sensitivity. The in vitro drug release studies of SA/Cur-PLA beads suggest that the curcumin release was significantly increased in a controlled manner and within 12 h, the cumulative release of curcumin was accomplished. In vitro hemolysis study shows a 7.93 % hemolysis rate which suggests that the produced bead is hemocompatible. For SA/Cur-PLA and SA/Cur, cytotoxicity evaluation and antimicrobial study was performed. Results show that both hydrogels are cytocompatible and antimicrobial in nature. It was found that biopolymer-based hydrogel beads enhanced the bioavailability of curcumin, antioxidant, biodegradable, and considered an effective carrier for the oral delivery of several hydrophobic nutraceuticals.

A hydrogel reservoir as a self-contained nucleus pulposus cell delivery vehicle for immunoregulation and repair of degenerated intervertebral disc

The strategies for modulating the local inflammatory microenvironment to inhibit intervertebral disc degeneration (IVDD) have garnered significant interest in recent years. In this study, we developed a "self-contained" injectable hydrogel capable of storing Mg2+ while carrying nucleus pulposus (NP) cells, with the aim of inhibiting IVDD through immunoregulation. The hydrogel consists of sodium alginate (SA), poly(N-isopropylacrylamide) (PNIPAAm), silicate ceramics (SC), and NP cells. When injected into the NP site, PNIPAAm gelates instantly under body temperature, forming an interpenetrating network (IPN) hydrogel with SA. Ca2+ released from the SC can crosslink the SA in situ, forming a SA/PNIPAAm hydrogel with an interpenetrating network (IPN) encapsulating the NP cells. Moreover, inside the hydrogel, Mg2+ released from SC are effectively encapsulated and maintained at a desirable concentration. These Mg2+ facilitates the local cell matrix synthesis and promotes immunomodulation (upregulating M2 / downregulating M1 macrophage polarization), thus inhibiting the IVDD progression. The proposed hydrogel has biocompatibility and is shown to enhance the expression of collagen II (COL II) and aggrecan. The potential of the injectable hydrogel in IVD repair has also been successfully demonstrated by in vivo studies. STATEMENT OF SIGNIFICANCE.

Recent advances and future challenges of the starch-based bio-composites for engineering applications

Starch is regarded as one of the most promising sustainable materials due to its abundant yield and excellent biodegradability. From the perspective of practical engineering applications, this paper systematically describes the development of starch-based bio-composites in the past decade. Packaging properties, processing characteristics, and current challenges for the efficient processing of starch-based bio-composites are reviewed in industrial packaging. Green coatings, binders, adsorbents, flocculants, flame retardants, and emulsifiers are used as examples to illustrate the versatility of starch-based bio-composites in chemical agent applications. In addition, the work compares the application of starch-based bio-composites in conventional spinning with emerging spinning technologies and describes the challenges of electrostatic spinning for preparing nanoscale starch-based fibers. In terms of flexible electronics, the starch-based bio-composites are regard as a solid polymer electrolyte and easily modified porous material. Moreover, we describe the applications of the starch-based gels in tissue engineering, controlled drug release, and medical dressings. Finally, the theoretical input and technical guidance in the advanced sustainable engineering application of the starch-based bio-composites are provided in the work.

Albumin-loaded thermo/pH dual-responsive nanogels based on sodium alginate and poly (N-vinyl caprolactam)

During the past decades, many researchers have tried to encapsulate medicines in biopolymer nanogels as injectable medicines. In the present study, dual-responsive bovine serum albumin (BSA)-loaded nanogels prepared from sodium alginate grafted poly (N-vinyl caprolactam) (PNVCL) have been reported. First, PNVCL-g-sodium alginate (PNVCL-g-Alg) was synthesized through free radical polymerization, and then nanogels were obtained from ionic crosslinking of sodium alginate in the presence of BSA. FTIR spectra showed that PNVCL-g-Alg nanogels were successfully prepared. Turbidimetry and rheometry analyses demonstrated the cloud point temperature near the human body. Particle size was evaluated using FE-SEM and dynamic light scattering and it was found that the size of particles in dry and swollen state are about 30 and 280 nm, respectively. The effect of temperature and pH on BSA release was evaluated. By comparing the drug release behavior, we found that the release of the protein at the temperature above the cloud point is faster than that at the temperature below the cloud point. The pH sensitivity of BSA-loaded PNVCL-g-Alg was evaluated at pH 5.5 and 7.4 and showed that the drug release was faster at acidic pH than at neutral pH.

Development of biochar-impregnated alginate beads for the delivery of biocontrol agents for peanut aflatoxin

The competitive inhibition of aflatoxigenic fungi by non-aflatoxigenic Aspergillus flavus has proved to be an effective method to prevent and control peanut aflatoxin contamination, and most of the currently used inoculum carriers are grains. In this study, the reliability and efficiency of replacing grain kernels with novel chitosan-coated alginate-poly(N-isopropylacrylamide) (PNIPAAm) beads impregnated with biochar (CSACB) were evaluated. Characterisation of the beads was performed by SEM, thermogravimetry analysis (TGA), and swelling properties analyses. The optimised CSACB beads had good physical stability, shelf life, and entrapment efficiency. In addition, the water-holding capacity and porous structure were excellent, as the biochar provided a beneficial microenvironment for the attachment and microbial growth of the biocontrol fungus. The effect of reducing aflatoxin in peanuts was verified experimentally. Collectively, the novel CSACB beads are suitable carriers of non-aflatoxigenic A. flavus for the biocontrol of peanut aflatoxin.

Rational Design of Thermoresponsive Microgel Templates with Polydopamine Surface Coating for Microtissue Applications

Functional microgels provide a versatile basis for synthetic in vitro platforms as alternatives to animal experiments. The tuning of the physical, chemical, and biological properties of synthetic microgels can be achieved by blending suitable polymers and formulating them such to reflect the heterogenous and complex nature of biological tissues. Based on this premise, this paper introduces the development of volume-switchable core-shell microgels as 3D templates to enable cell growth for microtissue applications, using a systematic approach to tune the microgel properties based on a deep conceptual and practical understanding. Microscopic microgel design, such as the tailoring of the microgel size and spherical shape, is achieved by droplet-based microfluidics, while on a nanoscopic scale, a thermoresponsive polymer basis, poly(N-isopropylacrylamide) (PNIPAAm), is used to provide the microgel volume switchability. Since PNIPAAm has only limited cell-growth promoting properties, the cell adhesion on the microgel is further improved by surface modification with polydopamine, which only slightly affects the microgel properties, thereby simplifying the system. To further tune the microgel thermoresponsiveness, different amounts of N-hydroxyethylacrylamide are incorporated into the PNIPAAm network. In a final step, cell growth on the microgel surface is investigated, both at a single microgel platform and in spheroidal cell structures.

Characterization of Biocompatible Hydrogel Lenses Using Methacrylic Acid with Neodymium Oxide Nanoparticles

We prepared hydrogel contact lenses containing nanoparticles of neodymium oxide and methacrylic acid (MA) to investigate their effect on the physical and chemical properties of the lens. Neodymium oxide nanoparticles improved the tensile strength without affecting wettability. The tensile strength, wettability, and light transmittance were all increased when MA was added in a specific ratio. To confirm the safety of the newly used nanoparticles, test on absorbance, eluate, and pH change were conducted and it was found that the safety level was satisfactory. In conclusion, it was confirmed that durable contact lenses can be manufactured with neodymium oxide nanoparticles, and most of the basic elements of the lens such as transparency, strength, and wettability could be improved using MA, which is a hydrophilic material. It is believed that the study will be helpful as part of basic research to use new materials.

Tailoring Alginate/Chitosan Microparticles Loaded with Chemical and Biological Agents for Agricultural Application and Production of Value-Added Foods

This work reviews the recent development of biopolymer-based delivery systems for agricultural application. Encapsulation into biopolymer microparticles ensures the protection and targeted delivery of active agents while offering controlled release with higher efficiency and environmental safety for ecological and sustainable plant production. Encapsulation of biological agents provides protection and increases its survivability while providing an environment safe for growth. The application of microparticles loaded with chemical and biological agents presents an innovative way to stimulate plant metabolites synthesis. This enhances plants’ defense against pests and pathogens and results in the production of higher quality food (i.e., higher plant metabolites share). Ionic gelation was presented as a sustainable method in developing biopolymeric microparticles based on the next-generation biopolymers alginate and chitosan. Furthermore, this review highlights the advantages and disadvantages of advanced formulations against conventional ones. The significance of plant metabolites stimulation and their importance in functional food production is also pointed out. This review offers guidelines in developing biopolymeric microparticles loaded with chemical and biological agents and guidelines for the application in plant production, underlining its effect on the plant metabolites synthesis.

Aflatoxin contamination and recommendations to improve its control: a review

Aflatoxin producing fungi cause contamination of food and feed resulting in health hazards and economic loss. It is imperative to develop workable control measures throughout the food chain to prevent and reduce aflatoxin contamination. This is a critical review of contemporary published papers in the field. It is a review of reports from the original aflatoxin researches conducted on foods, from 2015-2020. Most of the reports show high aflatoxin contaminations in food at levels that exceed a regulatory limit of 20 μg/kg and 4 μg/kg set for foods for human consumption in the USA and European Union, respectively. The highest aflatoxin concentration (3,760 μg/kg) was observed in maize. Some of the strategies being deployed in aflatoxin control include application of biocontrol agents, specifically of Aflasafe™, development of resistant crop varieties, and application of other good agricultural practices. We recommend the adoption of emerging technologies such as combined methods technology (CMT) or hurdle technology, one health concept (OHC), improved regulations, on-line monitoring of aflatoxins, and creative art intervention (CAI) to prevent or restrict the growth of target aflatoxin causative fungi.