Sorting Liquid Droplets by Surface Tension Using Devices with Quasi-Superamphiphobic Coatings

Preparation of Superhydrophilic/Underwater Superoleophobic and Superhydrophobic Stainless Steel Meshes Used for Oil/Water Separation

Robust membrane materials with high efficiency have attracted extensive attention in oil/water separation. In this work, carbon particles via candle combustion were firstly adsorbed on the surface of stainless steel meshes (SSMs), which formed a thin hydrophobic coating, and a rough structure was then constructed through chemical vapor deposition and high temperature calcination, with the resultant SSM surface wrapped with uniform silica coating possessing the characteristic of superoleophobicity underwater. Scanning electron microscope (SEM), energy dispersive spectroscopy (EDS), and X-ray powder diffraction (XRD) were used to characterize the modified SSMs. The prepared SSMs were superhydrophilic in air, and they had superoleophobicity underwater (157.4°). The separation efficiency of five oil/water mixtures was above 98.8%, and the separation flux was 46,300 L·m^-2·h^-1. After it was immersed in 1 mol/L NaOH, 1 mol/L HCl and 3.5 wt% NaCl for 24 h, respectively, the efficiency was still above 97.3%. Further immersion in the solution of dopamine and octadecylamine resulted in the transformation of superhydrophililc/superoleophobicity-underwater SSMs to superhydrophobic SSMs, and the resultant SSMs with reverse surface wettability was also used for the oil/water separation with good separation efficiency and separation flux.

Preparation of WPU-based super-amphiphobic coatings functionalized by in situ modified SiOx particles and their anti-biofilm mechanism

Fabrication of anti-wetting coatings with anti-biofouling and anti-biofilm properties has become a hot spot of attention in recent years. However, the anti-biofilm mechanism of anti-bacterial adhesion coatings with different wet resistance properties has not been explored in detail. In this work, SiO_x micro-nano particles were prepared by the Stöber method and were in situ modified. The SiO_x/waterborne polyurethane (WPU) coatings were prepared by the drop coating method, and the coatings with different hydrophobic and oleophobic properties were constructed by modifying the process conditions using SiO_x micro-nano particles as the roughness construction factor. Taking the dominant spoilage bacteria of aquatic products, Shewanella putrefaciens as the object, the anti-bacterial adhesion properties and anti-biofilm mechanism of the SiO_x/WPU coatings were investigated. The results show that, with the unmodified SiO_x particles increasing from 1.2% (w/V) to 4.0% (w/V), the hydrophobicity and thermal stability of the SiO_x/WPU coatings are significantly enhanced, but the oil repellency becomes worse due to the mesoporous structure. After SiO_x micro-nano particles are modified with 1H,1H,2H,2H-perfluorooctyl trichlorosilane (PFOTS), the surface energy of the SiO_x/WPU coatings is decreased, the liquid repellency is improved, and the surfaces are rough with the appearance of fluorocarbon compounds, but the thermal stabilities are slightly reduced. Among them, after the secondary modification of SiO_x micro-nano particles, the SiO_x/WPU coatings showed excellent oil repellency, lower surface energies and higher fluorocarbon content on the surface. Particularly, SiO_x/WPU coatings exhibited super-amphiphobicity after adjusting the amount of concentrated ammonia added during the secondary modification process. Meanwhile, we found that for the hydrophobic SiO_x/WPU coatings, the stronger the oleophobic property, the greater the anti-bacterial adhesion ability is, while the anti-bacterial adhesion ability of hydrophobic and selectively oleophobic or superhydrophobic and oleophobic SiO_x/WPU coatings is poor than that of amphiphilic SiO_x/WPU coatings. However, because the super-amphiphobic SiO_x/WPU coatings can be in the Cassie state with the bacterial solution for a long time, it can "capture" enough air to inhibit the irreversible adhesion of the bacteria. More importantly, the coatings can also inhibit the metabolic activity, secretion of extracellular polysaccharides, and activities of ATPase and AKP of the adherent bacteria, so it has a better anti-biofilm property. The anti-biofilm coatings can be used as food packaging materials or coated on the inner surface of packaging boxes to prevent the microbial infection.

Smart Janus titanium mesh used as a diode for both liquid droplet and air bubble transport

A Janus titanium mesh was fabricated with unidirectional transport for both liquid droplets in air and gas underwater.