Uncommon Sorption Mechanism of Aromatic Compounds onto Poly(Vinyl Alcohol)/Chitosan/Maleic Anhydride-β-Cyclodextrin Hydrogels

3D printing of Rg3-loaded hydrogel scaffolds: anti-inflammatory and scar-formation related collagen inhibitory effects for scar-free wound healing

During the process of wound healing, the stimulation of inflammatory factors often leads to abnormal proliferation of blood vessels and collagen, ultimately resulting in scar formation. To address this challenge, we fabricate a novel dermal extracellular matrix (DECM) hydrogel scaffold loaded with ginsenoside Rg3 (Rg3) using 3D printing technology. Mesoporous silica nanoparticles (MSNs) are introduced into the system to encase the Rg3 to control its release rate and enhance its bioavailability. We systematically evaluate the biological, physicochemical, and wound healing properties of this scaffold. In vitro studies demonstrate that the hydrogel exhibits excellent biocompatibility and solid-like rheological properties, ensuring its successful printing. In vivo studies reveal that the composite hydrogel scaffolds effectively accelerate wound healing and achieve scar-free wound healing within three weeks. Histological and immunohistochemical (IHC) analyses show that the composite hydrogel scaffolds reduce the inflammatory response and inhibit excessive collagen accumulation. These combined effects underscore the potential of our approach in effectively inhibiting scar formation.

A Supramolecular Hydrogel Based on Copolymers of Acrylic Acid and Maleic Anhydride Derivatives with Terpyridine Motifs

A kind of terpyridine derivative (NH₂-Tpy) in which the amino was incorporated by a short alkyl chain was synthesized. Through grafting of terpyridine units into the hydrophilic copolymers of maleic anhydride and acrylic acid PAAMa via the reaction of the amino groups in NH₂-Tpy and the maleic anhydride units, a series of gelator polymers—P1, P2, and P3—containing different contents of terpyridine units was synthesized. Under coordination of Ni²⁺ and terpyridine ligands in linear polymers, the supramolecular hydrogels H1, H2, and H3 with different cross-linking degrees were prepared. The linear polymers P1–P3 had a strong absorption peak at about 290 nm in the UV-vis spectra which was attributed to π–π* transition, and there was a new peak at about 335 nm led by the metal-to-ligands charge transfer (MLCT) when coordinated with Ni²⁺ ions. According to the rheological behaviors, the storage modulus (G′) was larger than the loss modulus (G′′). These hydrogels showed typical gel-like characteristics when the terpyridine content of the hydrogels exceeded 10%, and the hydrogels showed liquid-like characteristics when the terpyridine content of the hydrogels was less than 7%. The results of the micromorphological investigation of the xerogels from SEM illustrated the metal–terpyridine coordination cross-linking could have an important influence on the microstructures of the resulting hydrogels. Furthermore, these hydrogels based on supramolecular cross-links exhibited reversible solution–gel transition at different environmental temperatures. At the same time, the equilibrium swelling of the supramolecular hydrogels was 8.0–12.3 g/g, which increased with the decrease in the content of the terpyridine units in the resulting hydrogels.

Adsorption of benzene and toluene from aqueous solution using a composite hydrogel of alginate-grafted with mesoporous silica

Hydrogels are often claimed as optimal adsorbents for water treatment; however, their efficiency towards the removal of hydrophobic pollutants is still limited. As an alternative, hydrogels prepared from polymers functionalized with siliceous materials can overcome this issue. Here, a composite hydrogel (denoted as GEL-SBA15) was prepared using alginate grafted with mesoporous silica (SBA15) and poly(vinyl alcohol) for benzene and toluene adsorption from aqueous solutions. Adsorption studies demonstrated that a low dosage of GEL-SBA15 (10 mg) has a high adsorption capacity for benzene (1482.8 mg/g) and toluene (596.6 mg/g) under mild experimental conditions (pH 7.0, at 25 °C). Besides, the adsorption capacities of GEL-SBA15 for both pollutants were enhanced compared to the conventional hydrogel. Kinetic analysis showed that the adsorption of benzene and toluene follows a pseudo-second order model, while the experimental adsorption data were well-fitted by the Freundlich isotherm. According to this isotherm, the adsorption occurs via a collaborative process, and weak physical forces (π-π interactions, van der Waals and hydrophobic) are involved. Hence, the post-utilized GEL-SBA15 can be recycled and reused up to 6 times without losing adsorption performance. Although hydrogels are not common adsorbents for aromatic hydrocarbons, the results reported here rank GEL-SBA15 as a promising adsorbent for the removal of these pollutants from water.

Cyclodextrin-Cross-Linked Hydrogels for Adsorption and Photodegradation of Cationic Dyes in Aqueous Solution

Possessing three-dimensional porous structures and tunable mechanical strengths, cyclodextrin-containing polymeric hydrogels are one of the most promising water-based adsorbent materials due to their easy availability, simple chemical modification and environmental friendliness. In this work, two kinds of hydrogels were prepared via the copolymerization with acrylic acid and vinyl-derivatized β-cyclodextrins in water. These two gels have showed good adsorption performance towards cationic dyes through the noncovalent interactions with their anionic backbones and porous network. Meanwhile, pseudo-second-order model was selected to clarify the adsorption kinetics process. Moreover, nano-scaled TiO₂ was doped into these resultant cyclodextrins-based hydrogels to achieve efficient degradation of dyes upon light irradiation. The obtained TiO₂ -loaded hydrogels could exhibit improved adsorption performance and make the adsorbed dyes photo-degraded with the decolorization rates above 95%. It can be envisioned that such cyclodextrin-based soft materials may find applications in dye clearance and water treatment.

Partially Reduced Graphene Oxide Modified with Polyacrylonitrile for the Removal of Sm3+ from Water

An in situ emulsion polymerization method was used for the synthesis of polyacrylonitrile nanoparticles amino-functionalized partially reduced graphene oxide (PAN-PRGO). After that, hydrolyzed polyacrylonitrile nanoparticles amino-functionalized partially reduced graphene oxide (HPAN-PRGO) nanocomposite was achieved by the modification of nitrile groups of the composite polymer chains to carboxylic groups, aminoethylene diamine, and amidoxime functional groups through partial hydrolysis using a basic solution of sodium hydroxide for 20 min. Different synthesized materials were characterized and compared using well-known techniques including transmission electron microscope (TEM), scanning electron microscope (SEM), Fourier-transform infrared spectroscopy (FT-IR), Raman spectra, and X-ray diffraction (XRD). The nanocomposite was structured through the interaction between acrylonitrile’s (AN) nitrile groups and amino-functionalized graphene oxide nanosheets’ amino groups to successfully graft polyacrylonitrile over the surface of functionalized nanosheets as approved by characterization techniques. The synthesized composite was examined for the removal of samarium ions (Sm3+) from water. Different experimental conditions including pH, contact time, initial concentration, and adsorbent dose were investigated to determine the optimum conditions for the metal capture from water. The optimum conditions were found to be a contact time of 15 min, pH 6, and 0.01 g of adsorbent dosage. The experimental results found, in a good agreement with the Langmuir isotherm model, the maximum adsorption capacity of Sm3+ uptake was equal to 357 mg/g. A regeneration and reusability study of synthesized composite up to six cycles indicated the ability to use HPAN-PRGO nanocomposite several times for Sm3+ uptake. The obtained results prove that this polymer-based composite is a promising adsorbent for water treatment that must be studied for additional pollutants removal in the future.

Recent advances in biochar engineering for soil contaminated with complex chemical mixtures: Remediation strategies and future perspectives

Heavy metal/metalloids (HMs) and polycyclic aromatic hydrocarbons (PAHs) in soil have caused serious environmental problems, compromised agriculture quality, and have detrimental effects on all forms of life including humans. There is a need to develop appropriate and effective remediation methods to resolve combined contaminated problems. Although conventional technologies exist to tackle contaminated soils, application of biochar as an effective renewable adsorbent for enhanced bioremediation is considered by many scientific researchers as a promising strategy to mitigate HM/PAH co-contaminated soils. This review aims to: (i) provide an overview of biochar preparation and its application, and (ii) critically discuss and examine the prospects of (bio)engineered biochar for enhancing HMs/PAHs co-remediation efficacy by reducing their mobility and bioavailability. The adsorption effectiveness of a biochar largely depends on the type of biomass material, carbonisation method and pyrolysis conditions. Biochar induced soil immobilise and remove metal ions via various mechanisms including electrostatic attractions, ion exchange, complexation and precipitation. PAHs remediation mechanisms are achieved via pore filling, hydrophobic effect, electrostatic attraction, hydrogen bond and partitioning. During last decade, biochar engineering (modification) via biological and chemical approaches to enhance contaminant removal efficiency has garnered greater interests. Hence, the development and application of (bio)engineered biochars in risk management, contaminant management associated with HM/PAH co-contaminated soil. In terms of (bio)engineered biochar, we review the prospects of amalgamating biochar with hydrogel, digestate and bioaugmentation to produce biochar composites.

Environment impact and probabilistic health risks of PAHs in dusts surrounding an iron and steel enterprise

Dust can be regarded as environmental medium that indicates the level and spatial distribution of polycyclic aromatic hydrocarbons (PAHs) coming from different pollution sources. In this study, samples including road dust, roof dust, and bare soil near an iron and steel enterprise (ISE) in Laiwu city of North China were collected. To assess the environment impact, atmosphere particulates and one flue dust from a coking plant were simultaneously sampled. Sixteen USEPA PAHs were detected quantitatively by Gas Chromatography Mass Spectrometry (GC-MS). A laser particle size analyzer was used to obtain the grain size of the dust particle samples. The results showed that PAH concentrations displayed great variability in the dust samples. The ∑₁₆PAHs concentration was found to be between 0.460 and 46.970 μg/g (avg ± sd 10.892 ± 1.185 μg/g) in road dust, between 0.670 and 17.140 μg/g (avg ± sd 6.751 ± 0.692 μg/g) in roof dust, and 13.990 ± 1.203 μg/g in bare soil. In the environment atmosphere sites, the ∑₁₆ PAHs value in PM_2.5 constituted a very large proportion of PM₁₀, indicating that PAHs in finer particle sizes should be given greater emphasis. The ∑₁₆PAHs concentration was relatively high in the area close to the ISE because of the great impact of the ISE industrial activities. PAH concentration curves were similar, and the most abundant individual PAHs in the atmosphere sites were BbF, BkF, and Flu, and BbF, BkF, and Chry in dusts. Toxicity analysis revealed that PAHs with four rings, including carcinogenic PAHs, were the dominant pollutants in the studied area. The toxic equivalency value (TEQ_BaP), the carcinogenic health risk assessment value recommended by the US EPA, was calculated for seven carcinogenic PAHs, revealing that they account for more than 93.0% of the total TEQ_Bap of the 16 PAHs and indicating the major toxic equivalent concentration contributor. Incremental lifetime cancer risk (ILCR) estimation results showed that PAHs tended to bring about great health risks through skin contact, followed by ingestion and inhalation. By comparison, road dust exhibited greater carcinogenic risks than roof dust, and bare soil may undergo heavier pollution. Therefore, the results of this study would be helpful in the effort to understand the PAHs pollution from the steel industry, which will provide some guidance for the probabilistic assessment of local health risks.