Multifunctional and Transformable 'Clickable' Hydrogel Coatings on Titanium Surfaces: From Protein Immobilization to Cellular Attachment

Growth factor-functionalized titanium implants for enhanced bone regeneration: A review

Titanium and titanium alloys are widely favored materials for orthopedic implants due to their exceptional mechanical properties and biological inertness. The additional benefit of sustained local release of bioactive substances further promotes bone tissue formation, thereby augmenting the osseointegration capacity of titanium implants and attracting increasing attention in bone tissue engineering. Among these bioactive substances, growth factors have shown remarkable osteogenic and angiogenic induction capabilities. Consequently, researchers have developed various physical, chemical, and biological loading techniques to incorporate growth factors into titanium implants, ensuring controlled release kinetics. In contrast to conventional treatment modalities, the localized release of growth factors from functionalized titanium implants not only enhances osseointegration but also reduces the risk of complications. This review provides a comprehensive examination of the types and mechanisms of growth factors, along with a detailed exploration of the methodologies used to load growth factors onto the surface of titanium implants. Moreover, it highlights recent advancements in the application of growth factors to the surface of titanium implants (Scheme 1). Finally, the review discusses current limitations and future prospects for growth factor-functionalized titanium implants. In summary, this paper presents cutting-edge design strategies aimed at enhancing the bone regenerative capacity of growth factor-functionalized titanium implants-a significant advancement in the field of enhanced bone regeneration.

Metal-Free Click-Chemistry: A Powerful Tool for Fabricating Hydrogels for Biomedical Applications

Increasing interest in the utilization of hydrogels in various areas of biomedical sciences ranging from biosensing and drug delivery to tissue engineering has necessitated the synthesis of these materials using efficient and benign chemical transformations. In this regard, the advent of "click" chemistry revolutionized the design of hydrogels and a range of efficient reactions was utilized to obtain hydrogels with increased control over their physicochemical properties. The ability to apply the "click" chemistry paradigm to both synthetic and natural polymers as hydrogel precursors further expanded the utility of this chemistry in network formation. In particular, the ability to integrate clickable handles at predetermined locations in polymeric components enables the formation of well-defined networks. Although, in the early years of "click" chemistry, the copper-catalyzed azide-alkyne cycloaddition was widely employed, recent years have focused on the use of metal-free "click" transformations, since residual metal impurities may interfere with or compromise the biological function of such materials. Furthermore, many of the non-metal-catalyzed "click" transformations enable the fabrication of injectable hydrogels, as well as the fabrication of microstructured gels using spatial and temporal control. This review article summarizes the recent advances in the fabrication of hydrogels using various metal-free "click" reactions and highlights the applications of thus obtained materials. One could envision that the use of these versatile metal-free "click" reactions would continue to revolutionize the design of functional hydrogels geared to address unmet needs in biomedical sciences.

Preparation and Properties of Physical Gel on Medical Titanium Alloy Surface

Medical titanium alloy Ti-6Al-4V (TC4) has been widely used in the medical field, especially in human tissue repair. However, TC4 has some shortcomings, which may cause problems with biocompatibility and mechanical compatibility in direct contact with the human body. To solve this problem, physical gels are formed on the surface of TC4, and the storage modulus of the formed physical gel matches that of the human soft tissue. 2-bromoisobutyryl bromide (BIBB) and dopamine (DA) were used to form initiators on the surface of hydroxylated medical titanium alloy. Different initiators were formed by changing the ratio of BIBB and DA, and the optimal one was selected for subsequent reactions. Under the action of the catalyst, L-lactide and D-lactide were ring-opened polymerized with hydroxyethyl methacrylate (HEMA), respectively, to form macromolecular monomers HEMA-PLLA₂₉ and HEMA-PDLA₂₉ with a polymerization degree of 29. The two macromolecular monomers were stereo-complexed by ultrasound to form HEMA-stereocomplex polylactic acid (HEMA-scPLA₂₉). Based on two monomers, 2-(2-methoxyethoxy) ethyl methacrylate (MEO₂MA) and oligo (ethylene oxide) methacrylate (OEGMA), and the physical crosslinking agent HEMA-scPLA_29, physical gels are formed on the surface of TC4 attached to the initiator via Atom Transfer Radical Addition Reaction (ATRP) technology. The hydrogels on the surface of titanium alloy were characterized and analyzed by a series of instruments. The results showed that the storage modulus of physical glue was within the range of the energy storage modulus of human soft tissue, which was conducive to improving the mechanical compatibility of titanium alloy and human soft tissue.

Antibacterial-Based Hydrogel Coatings and Their Application in the Biomedical Field-A Review

Hydrogels exhibit excellent moldability, biodegradability, biocompatibility, and extracellular matrix-like properties, which make them widely used in biomedical fields. Because of their unique three-dimensional crosslinked hydrophilic networks, hydrogels can encapsulate various materials, such as small molecules, polymers, and particles; this has become a hot research topic in the antibacterial field. The surface modification of biomaterials by using antibacterial hydrogels as coatings contributes to the biomaterial activity and offers wide prospects for development. A variety of surface chemical strategies have been developed to bind hydrogels to the substrate surface stably. We first introduce the preparation method for antibacterial coatings in this review, which includes surface-initiated graft crosslinking polymerization, anchoring the hydrogel coating to the substrate surface, and the LbL self-assembly technique to coat crosslinked hydrogels. Then, we summarize the applications of hydrogel coating in the biomedical antibacterial field. Hydrogel itself has certain antibacterial properties, but the antibacterial effect is not sufficient. In recent research, in order to optimize its antibacterial performance, the following three antibacterial strategies are mainly adopted: bacterial repellent and inhibition, contact surface killing of bacteria, and release of antibacterial agents. We systematically introduce the antibacterial mechanism of each strategy. The review aims to provide reference for the further development and application of hydrogel coatings.

Fluorescent Composites Prepared of Tb3+ and Sulfonated Sulfate Polymer Constructed through Post-Sulfonation Sulfur-Fluorine Exchange Polymerization by Symmetric Molecular

Organic fluorescent materials are widely applied in different important fields, such as light-emitting display, explosive detection, molecular imprinting, and so on, because of their low cost, easy functionalization, and large-scale fabrication. In this work, we designed and synthesized a new kind of organic fluorescent polysulfate composite material through post-sulfonation sulfur-fluorine exchange polymerization (a new kind of click chemistry) by symmetric molecular. Sulfur-fluorine exchange polymerization: symmetrical structure SO2F−R1−SO2F molecular reacted with symmetrical OH−R2−OH molecular through nucleophilic reaction in the presence of inorganic base. The polysulfate material was further modified by ClSO3H to get PSE−SO3H materials. Tb3+ was highly dispersed on PSE−SO3H to afford organic-inorganic hybrid fluorescent materials through the conventional coordination chemistry method. The emission wavelength of the organic-inorganic hybrid fluorescent polymer PSE−SO3H−Tb3+ was between 475 and 685 nm, the quantum yield reached 1.18%, and fluorescence lifetime lasted for 730.168 us, with the pure green light emission and long light-emitting lifetime. The fluorescence film was prepared through phase transformation method by the fluorescent polymer material PSE−SO3H−Tb3+. The film has the strong stability property in different pH conditions (pH 1~13). Thus, this kind of organic fluorescent polysulfate composite material may have certain prospects application in terms of detection and luminescence in extreme chemical environments in the future.

Optimization of decellularized liver matrix-modified chitosan fibrous scaffold for C3A hepatocyte culture

Hepatocyte scaffold is an essential part in bioartificial liver device. We have designed a novel hepatocyte scaffold based on porcine liver extracellular matrix (ECM) and chitosan (CTS) fabrics. This CTS-ECM scaffold can improve cell adhesion and proliferation. In the present study, an orthogonal test was designed to optimize the CTS/ECM composite scaffold, in which ECM concentration, EDC concentration and EDC to NHS ratio were taken as factors, proportion of nitrogen element and hydroxyproline content as indicators. The cytocompatibility of the novel scaffold for C3A hepatocytes was analyzed in vitro. The orthogonal test demonstrated that the optimal scaffold should be based on ECM concentration of 5 mg/mL, EDC concentration of 5 mg/mL, and EDC to NHS ratio 1:1. C3A hepatocytes cultured on the optimized CTS-ECM scaffolds showed stronger proliferation and functionality than those on Cytodex3 microcarriers (p < 0.05). The CTS/ECM composite scaffold may be widely used as a promising hepatocyte culture carrier, especially in bioartificial liver support systems.

Inhibitory effect of nucleotides on acetylcholine esterase activity and its microflow-based actuation in blood plasma

The inhibitory effect of nucleotides on the catalytic activity of acetylcholine esterase (AChE) was rationalized and similar inhibition trend was observed when analyzing the macroscopic fluid flow generated by surface...

Controlled release of dopamine coatings on titanium bidirectionally regulate osteoclastic and osteogenic response behaviors

Bone diseases, for example, osteoporosis, cause excessive differentiation of osteoclasts and decreased bone formation, resulting in imbalance of bone remodeling and poor osseointegration, which can be considered a relative contraindication for titanium implants. Dopamine (DA) might provide a solution to this problem by inhibiting osteoclasts and promoting osteoblasts at different concentrations. However, current commercial implants cannot load bone-active molecules, such as DA. Therefore, this study aimed to develop a surface modification method for implants to achieve a controlled release of DA and enhance the resistance of titanium implants to bone resorption and bone regeneration. DA-loaded alginate-arginine-glycine-aspartic acid (RGD) (AlgR) coatings on a vaterite-modified titanium surface were successfully assembled, which continuously and steadily released DA. In vitro studies have shown that materials showing good biocompatibility can not only inhibit receptor activator of nuclear factor-kappa B (NFκB) ligand (RANKL)-induced osteoclastogenesis but also enhance the adhesion and osteogenic differentiation of human bone marrow mesenchymal stem cells (hBMSCs). The optimal DA-loaded concentration of this bidirectional regulation is 100 μM. Interestingly, DA more effectively attenuated osteoclastogenesis when released in a sustained manner from titanium coatings than it did via traditional, free administration, and the alginate-RGD coating and DA clearly exhibited great synergy. This study provides a design of titanium implant surface modification to improve bone remodeling around implants.