Zwitterionic Polymer Brush Grafted on Polyvinylidene Difluoride Membrane Promoting Enhanced Ultrafiltration Performance with Augmented Antifouling Property

The antifouling mechanism and application of bio-inspired superwetting surfaces with effective antifouling performance

With the rapid development of industries, the issue of pollution on Earth has become increasingly severe. This has led to the deterioration of various surfaces, rendering them ineffective for their intended purposes. Examples of such surfaces include oil rigs, seawater intakes, and more. A variety of functional surface techniques have been created to address these issues, including superwetting surfaces, antifouling coatings, nano-polymer composite materials, etc. They primarily exploit the membrane's surface properties and hydration layer to improve the antifouling property. In recent years, biomimetic superwetting surfaces with non-toxic and environmental characteristics have garnered massive attention, greatly aiding in solving the problem of pollution. In this work, a detailed presentation of antifouling superwetting materials was made, including superhydrophobic surface, superhydrophilic surface, and superhydrophilic/underwater superoleophobic surface, along with the antifouling mechanisms. Then, the applications of the superwetting antifouling materials in antifouling domain were addressed in depth.

Salt Transport in Crosslinked Hydrogel Membranes Containing Zwitterionic Sulfobetaine Methacrylate and Hydrophobic Phenyl Acrylate

Produced water is a by-product of industrial operations, such as hydraulic fracturing for increased oil recovery, that causes environmental issues since it includes different metal ions (e.g., Li+, K+, Ni2+, Mg2+, etc.) that need to be extracted or collected before disposal. To remove these substances using either selective transport behavior or absorption-swing processes employing membrane-bound ligands, membrane separation procedures are promising unit operations. This study investigates the transport of a series of salts in crosslinked polymer membranes synthesized using a hydrophobic monomer (phenyl acrylate, PA), a zwitterionic hydrophilic monomer (sulfobetaine methacrylate, SBMA), and a crosslinker (methylenebisacrylamide, MBAA). Membranes are characterized according to their thermomechanical properties, where an increased SBMA content leads to decreased water uptake due to structural differences within the films and to more ionic interactions between the ammonium and sulfonate moieties, resulting in a decreased water volume fraction, and Young’s modulus increases with increasing MBAA or PA content. Permeabilities, solubilities, and diffusivities of membranes to LiCl, NaCl, KCl, CaCl2, MgCl2, and NiCl2 are determined by diffusion cell experiments, sorption-desorption experiments, and the solution-diffusion relationship, respectively. Permeability to these metal ions generally decreases with an increasing SBMA content or MBAA content due to the corresponding decreasing water volume fraction, and the permeabilities are in the order of K+ > Na+ > Li+ > Ni2+ > Ca2+ > Mg2+ presumably due to the differences in the hydration diameter.

Dynamic Wetting Properties of Silica-Poly (Acrylic Acid) Superhydrophilic Coatings

Superhydrophilic coatings based on a hydrophilic silica nanoparticle suspension and Poly (acrylic acid) (PAA) were prepared by dip coating. Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM) were used to examine the morphology of the coating. The effect of surface morphology on the dynamic wetting behavior of the superhydrophilic coatings was studied by changing the silica suspension concentration from 0.5% wt. to 3.2% wt. while keeping the silica concentration in the dry coating constant. The droplet base diameter and dynamic contact angle with respect to time were measured using a high-speed camera. A power law was found to describe the relationship between the droplet diameter and time. A significantly low experimental power law index was obtained for all the coatings. Both roughness and volume loss during spreading were suggested to be responsible for the low index values. The water adsorption of the coatings was found to be the reason for the volume loss during spreading. The coatings exhibited good adherence to the substrates and retention of hydrophilic properties under mild abrasion.

Significantly improved antifouling capability of silicone rubber surfaces by covalently bonded acrylated agarose towards biomedical applications

Bacteria have the extraordinary ability to adhere to biomaterial surfaces and form multicellular structures known as biofilms, which have a detrimental impact on the performance of medical devices. Herein, an investigation highlighted the effective inhibition of bacteria adhesion and overgrowth on silicone rubber surface by grafting polysaccharide, agarose (AG), to construct hydrophilic and negatively charged surfaces. Because of the strong hydration capacity of agarose, the water contact angle of the modified silicone rubber surfaces was significantly reduced from 107.6 ± 2.7° to 19.3 ± 2.6°, which successfully limited bacterial adherence. Most importantly, the durability and stability of coating were observed after 10 days of simulated dynamic microenvironment in vivo, exhibiting a long service life. This modification method did not compromise biocompatibility of silicone rubber, opening a door to new applications for silicone rubber in the field of biomedical materials.

Wetting Characteristics of Nanosilica-Poly (acrylic acid) Transparent Anti-Fog Coatings

The effect of particle loading on the wetting properties of coatings was investigated by modifying a coating formulation based on hydrophilic silica nanoparticles and poly (acrylic acid) (PAA). Water contact angle (WCA) measurements were conducted for all coatings to characterize the surface wetting properties. Wettability was improved with an increase in particle loading. The resulting coatings showed superhydrophilic (SH) behavior when the particle loading was above 53 vol. %. No new peaks were detected by attenuated total reflection (ATR-FTIR). The surface topography of the coatings was studied by atomic force microscopy (AFM) and scanning electron microscopy (SEM). The presence of hydrophilic functional groups and nano-scale roughness were found to be responsible for superhydrophilic behavior. The surface chemistry was found to be a primary factor determining the wetting properties of the coatings. Adhesion of the coatings to the substrate was tested by tape test and found to be durable. The antifogging properties of the coatings were evaluated by exposing the films under different environmental conditions. The SH coatings showed anti-fogging behavior. The transparency of the coatings was significantly improved with the increase in particle loading. The coatings showed good transparency (>85% transmission) when the particle loading was above 84 vol. %.

Antibacterial studies of Ag@HPEI@GO nanocomposites and their effects on fouling and dye rejection in PES UF membranes

A series of polyethersulfone membranes containing Ag@HPEI@GO composite was fabricated using non-solvent induced phase separations (NIPS) to mitigate against biofilm causing bacteria and modulate solute rejection. All materials produced and used were fully characterised using a combination of appropriate physicochemical techniques including FTIR, XRD, BET, SEM, AFM. The GO-based fillers exhibited bactericidal activities. The bactericidal activities of GO, HPEI@GO against Escherichia Coli (E. coli) were observed at 8 mg mL-1 whilst Ag@HPEI@GO composites exhibit bactericidal activities against E. coli at 4 mg mL-1. Against Klebsiella pneumonia (K. pneumonia), GO bactericidal activities were observed at 8 mg mL-1, whilst HPEI@GO and Ag@HPEI@GO bactericidal activities on K. pneumonia were observed at 4 mg mL-1. Against Staphylococcus aureus (S. aureus), GO exhibit bactericidal activities at 8 mg mL-1, HPEI@GO and Ag@HPEI@GO composites exhibit bactericidal activities on S. aureus at 4 mg mL-1. The aforementioned microorganisms are among the microorganism that causes biofilm formation on surfaces. The membrane performance was assessed by measuring pure water flux, solute rejections and fouling propensity with three different organic dye molecules and bovine serum albumin (BSA). All composite membranes (GO/PES, HPEI@GO/PES, and Ag@HPEI@GO/PES) exhibited increased hydrophilicity and higher pure water flux compared to the baseline PES membranes with concomitant increase in fouling resistance, The observed flux recovery ratios (FRR) were 80% (GO/PES), 70% (HPEI@GO/PES) and 69% (Ag@HPEI@GO/PES) respectively compared to the 45% FRR observed for the baseline PES membrane after BSA fouling. Congo red (CR) used as an indicator for molecular cut-off of UF membranes was rejected above 95% by all nanocomposite membranes. Furthermore, the nanocomposite membranes-maintained rejection for the positively charged methylene blue (MB) of above 90% whilst rejection observed for amaranth (AR) dye decreased from 80 to 58% with increasing filler content in the PES matrix. The results demonstrate the positive influence of GO, HPEI@GO and Ag/HPEI@GO nanofillers on flux, fouling and solute rejection performance of resultant PES nanocomposite membranes.

Study on Treatment of Tiny Pollution Water with PAC-HUM System in Kuitun River

Kuitun city, Xinjiang is dry and short of water, so it is urgent to treat and utilize all kinds of unconventional water. In view of this problem, we conducted a study on the treatment of tiny pollution water in Kuitun River. We investigated the effect of dosage of powder activated carbon (PAC) on hollow-fiber ultrafiltration membrane (HUM) performance. The results show that the stable operation time of hollow fiber ultrafiltration membranes lengthened and the rate of reduction of the flux was reduced when the PAC dosage was increased. The addition of PAC had no obvious effect on the resistance of membrane filtration. We conducted experiments to evaluate the effect of ultrafiltration of tiny pollution water in combination with PAC. When the parameters of operation and PAC dosage were appropriately regulated, the removal rates of chemical oxygen demand (COD), ammonia nitrogen (NH₃-N) and ferric ions (Fe) reached 62%, 32% and 90%, respectively. When the PAC dosage was 200 mg/L, 100 mg/L and 150 mg/L, the highest removal rates were achieved under normal temperature and pressure. The effluent COD was less than 5.0 mg/L, NH₃-N was less than 1.5 mg/L and Fe was less than 0.5 mg/L, achieving better results than the quality standard of surface water (GB3838-2002). The treated water can be discharged into the river or recirculated to utilities. The fouled membrane was cleaned by water rinsing, water/acid rinsing and water/alkali rinsing, with recovery ratios of 44%, 81% and 88%, respectively. The results of this study can serve as a foundation for the efficient utilization of water resources and the development of new water treatment technologies in Xinjiang.

Investigation on the feasibility of recycled polyvinylidene difluoride polymer from used membranes for removal of methylene blue: experimental and DFT studies

This study reports the feasibility of recycled polyvinylidene difluoride (PVDF) beads to decolourize methylene blue (MB) from aqueous streams. The beads were characterized using scanning electron microscopy (SEM), X-ray powder diffraction (XRD), thermogravimetric analysis (TGA), and Fourier transform infrared spectroscopy (FT-IR) for its morphological and structural analysis. The effect of various process parameters such as adsorbent dose, initial concentration, contact time, and pH was studied. The first principle density functional theory (DFT) calculations were performed to investigate the underlying mechanism behind the adsorption process. The MB dye adsorption on recycled PVDF beads followed the pseudo-second-order kinetics and Langmuir isotherm, indicating the adsorption was chemical and monolayer. The maximum adsorption capacity obtained was 27.86 mg g^-1. The adsorption energy of MB-PVDF predicted from the DFT study was -64.7 kJ mol^-1. The HOMO-LUMO energy gap of PVDF decreased from 9.42 eV to 0.50 eV upon interaction with MB dye due to the mixing of molecular orbitals. The DFT simulations showed that the interaction of the MB dye molecule was from the electronegative N atom of the MB dye molecule, implying that electrostatic interactions occurred between the recycled PVDF beads and the positively charged quaternary ammonium groups in MB dye. The present study demonstrates the potential of recycled PVDF beads for a low-cost dye removal technique from textile wastewater.

Cell-membrane-inspired polymers for constructing biointerfaces with efficient molecular recognition

Fabrication of devices that accurately recognize, detect, and separate target molecules from mixtures is a crucial aspect of biotechnology for applications in medical, pharmaceutical, and food sciences. This technology has also been recently applied in solving environmental and energy-related problems. In molecular recognition, biomolecules are typically complexed with a substrate, and specific molecules from a mixture are recognized, captured, and reacted. To increase sensitivity and efficiency, the activity of the biomolecules used for capture should be maintained, and non-specific reactions on the surface should be prevented. This review summarizes polymeric materials that are used for constructing biointerfaces. Precise molecular recognition occurring at the surface of cell membranes is fundamental to sustaining life; therefore, materials that mimic the structure and properties of this particular surface are emphasized in this article. The requirements for biointerfaces to eliminate nonspecific interactions of biomolecules are described. In particular, the major issue of protein adsorption on biointerfaces is discussed by focusing on the structure of water near the interface from a thermodynamic viewpoint; moreover, the structure of polymer molecules that control the water structure is considered. Methodologies enabling stable formation of these interfaces on material surfaces are also presented.

Antifouling PVC Catheters by Gamma Radiation-Induced Zwitterionic Polymer Grafting

In medical environments, polymeric surfaces tend to become contaminated, hindering the treatment and recovery from diseases. Biofouling-resistant materials, such as zwitterionic polymers, may mitigate this problem. In this work, the modification of PVC catheters with a binary graft of 4-vinylpyridine (4VP) and sulfobetaine methacrylate (SBMA) by the oxidative pre-irradiation method is proposed to develop pH-responsive catheters with an antifouling capacity. The ionizing radiation allowed us to overcome limitations in the synthesis associated with the monomer characteristics. In addition, the grafted materials showed a considerable increase in their hydrophilic character and antifouling capacity, significantly decreasing the protein adsorption compared to the unmodified catheters. These materials have potential for the development of a combined antimicrobial and antifouling capabilities system to enhance prophylactic activity or even to help treat infections.

PSU-g-SBMA hollow fiber membrane for treatment of oily wastewater

Ultrafiltration membranes can intercept oil particles smaller than 10 μm, but the membranes are easily contaminated by oil due to their hydrophobicity. To treat various oily wastewaters, we prepared a hydrophilic hollow fiber membrane (HFM) with anti-fouling property by grafting sulfobetaine methacrylate (SBMA) onto polysulfone (PSU). For six simulated wastewaters containing emulsified oil at 1,000 mg/L, the PSU-g-SBMA HFM was able to remove 98.5-99.7% of oil, higher than that of PSU HFM at 91.1-98.9%. The oil concentration in filtrate was less than 15 mg/L, which could meet the discharge standard of wastewater. The water flux of PSU-g-SBMA HFM can be completely recovered after being washed by rhamnolipid and alkali solution, while the same cleaning process could not recover the PSU HFM. As found, the contact angles of oil droplets on the PSU-g-SBMA membrane were larger than those on PSU membrane, which indicated the improved hydrophilicity by PSU-g-SBMA. For 48 h of filtration to soybean and diesel oil/water emulsion, the effect of PSU-g-SBMA HFM was stable and the flux could be completely recovered by cleaning. Therefore, we provided a new method for oily wastewater treatment, which can efficiently and energy-saving remove various oil substances in wastewater.

Application of Zwitterions in Forward Osmosis: A Short Review

Forward osmosis (FO) is an important desalination method to produce potable water. It was also used to treat different wastewater streams, including industrial as well as municipal wastewater. Though FO is environmentally benign, energy intensive, and highly efficient; it still suffers from four types of fouling namely: organic fouling, inorganic scaling, biofouling and colloidal fouling or a combination of these types of fouling. Membrane fouling may require simple shear force and physical cleaning for sufficient recovery of membrane performance. Severe fouling may need chemical cleaning, especially when a slimy biofilm or severe microbial colony is formed. Modification of FO membrane through introducing zwitterionic moieties on the membrane surface has been proven to enhance antifouling property. In addition, it could also significantly improve the separation efficiency and longevity of the membrane. Zwitterion moieties can also incorporate in draw solution as electrolytes in FO process. It could be in a form of a monomer or a polymer. Hence, this review comprehensively discussed several methods of inclusion of zwitterionic moieties in FO membrane. These methods include atom transfer radical polymerization (ATRP); second interfacial polymerization (SIP); coating and in situ formation. Furthermore, an attempt was made to understand the mechanism of improvement in FO performance by zwitterionic moieties. Finally, the future prospective of the application of zwitterions in FO has been discussed.

A "Graft to" Electrospun Zwitterionic Bilayer Membrane for the Separation of Hydraulic Fracturing-Produced Water via Membrane Distillation

Simultaneous fouling and pore wetting of the membrane during membrane distillation (MD) is a major concern. In this work, an electrospun bilayer membrane for enhancing fouling and wetting resistance has been developed for treating hydraulic fracture-produced water (PW) by MD. These PWs can contain over 200,000 ppm total dissolved solids, organic compounds and surfactants. The membrane consists of an omniphobic surface that faces the permeate stream and a hydrophilic surface that faces the feed stream. The omniphobic surface was decorated by growing nanoparticles, followed by silanization to lower the surface energy. An epoxied zwitterionic polymer was grafted onto the membrane surface that faces the feed stream to form a tight antifouling hydration layer. The membrane was challenged with an aqueous NaCl solution containing sodium dodecyl sulfate (SDS), an ampholyte and crude oil. In the presence of SDS and crude oil, the membrane was stable and displayed salt rejection (>99.9%). Further, the decrease was much less than the base polyvinylidene difluoride (PVDF) electrospun membrane. The membranes were also challenged with actual PW. Our results highlight the importance of tuning the properties of the membrane surface that faces the feed and permeate streams in order to maximize membrane stability, flux and salt rejection.

High-Performance Polyacrylic Acid-Grafted PVDF Nanofiltration Membrane with Good Antifouling Property for the Textile Industry

In the textile industry, a high-efficiency dye removal and low-retention of salt is demanded for recycling wastewater. In this study, polyvinylidene fluoride (PVDF) ultrafiltration membrane was transformed to a negatively charged loose nanofiltration (NF) membrane through UV-grafting of acrylic acid. At the optimal exposure of PVDF membrane in UV light for 5 min, the membrane had a high dye recovery above 99% (Congo red and Eriochrome^® Black T) and a low sodium chloride (NaCl) rejection of less than 15% along with pure water flux of 26 L∙m⁻²∙h⁻¹∙bar⁻¹. Its antifouling and oleophobicity surface properties were verified using fluorescent- bovine serum albumin (BSA) and underwater mineral oil contact angle, respectively. According to the fluorescent microscopic images, the modified membrane had ten times lower adhesion of protein on the surface than the unmodified membrane. The underwater oil contact angle was raised from 110° to 155°. Moreover, the salt rejection followed this sequence: Na₂SO₄ > MgSO₄ > NaCl > MgCl₂, which agreed with the typical negatively charged NF membrane. In addition, the physicochemical characterization of membranes was further investigated to understand and link to the membrane performance, such as surface functional group, surface elements analysis, surface roughness/morphology, and surface hydrophilicity.

Superhydrophilic Coating with Antibacterial and Oil-Repellent Properties via NaIO4-Triggered Polydopamine/Sulfobetaine Methacrylate Polymerization

Superhydrophilic coatings have been widely used for the surface modification of membranes or biomedical devices owing to their excellent antifouling properties. However, simplifying the modification processes of such materials remains challenging. In this study, we developed a simple and rapid one-step co-deposition process using an oxidant trigger to fabricate superhydrophilic surfaces based on dopamine chemistry with sulfobetaine methacrylate (SBMA). We studied the effect of different oxidants and SBMA concentrations on surface modification in detail using UV-VIS spectrophotometry, dynamic light scattering, atomic force microscopy, X-ray photoelectron spectroscopy, and surface plasmon resonance. We found that NaIO4 could trigger the rate of polymerization and the optimum ratio of dopamine to SBMA is 1:25 by weight. This makes the surface superhydrophilic (water contact angle < 10°) and antifouling. The superhydrophilic coating, when introduced to polyester membranes, showed great potential for oil/water separation. Our study provides a complete description of the simple and fast preparation of superhydrophilic coatings for surface modification based on mussel-inspired chemistry.