Novel Low-Temperature Chemical Vapor Deposition of Hydrothermal Delignified Wood for Hydrophobic Property

Wood Surface-Embedding of Functional Monodisperse SiO2 Microspheres for Achieving Robust, Durable, Nature-Inspired, Programmable Superrepellent Interfaces

Nature-inspired, robust, durable, liquid-repellent interfaces have attracted considerable interest in the field of wood biomimetic intelligence science and technology application. However, realizing green environmental protection and low maintenance and replacement cost wood surfaces constructed with micro/nanoarchitectures is not an easy task. Aiming at the problem of poor waterproof performance of wood, a silicon dioxide/polydimethylsiloxane (SiO2/PDMS) self-cleaning programmable superhydrophobic coating was biomimetically constructed on the wood substrate by surface-embedded dual-dipping design based on the "substrates + nanoparticles" hybrid principle of the lotus leaf effect. This robust, durable, nature-inspired, self-cleaning, programmable superhydrophobic coating was found to have no observable impact on the original color and texture of the natural wood. The SiO2/PDMS/wood prepared exhibited exceptional liquid repellency and a high static water contact angle (WCA) of 158.5° and a low slide angle (SA) of 10°, including everyday general-purpose droplets, indicating that the introduction of the monodisperse SiO2 microspheres can effectively enhance the superhydrophobic properties of the hydrophilic wood. We applied this strategy to a variety of substrates, including wood-cellulose aerogel and wood-cellulose paper, and demonstrated that the liquid-repellent nature of the self-cleaning superhydrophobic coating remained unchanged. Moreover, the superhydrophobic surface of SiO2/PDMS/wood was preserved even after harsh abrasion conditions, including mechanical damage (sandpaper, sharp steel blade, and tapes), thermal damage (UV irradiation and low/high-temperature exposure such as steaming and freezing), chemical damage, and solvent corrosion (immersion in acid, alkali), demonstrating robust stability of the superhydrophobic coating. Furthermore, the SiO2/PDMS programmable superhydrophobic coating exhibits exceptional exciting self-cleaning and stain-resistant properties, making it offer greater possibilities in terms of scientific challenges and real-world problem-solving at biomimetic smart superhydrophobic interfaces in wood.

Wood Sponge for Oil-Water Separation

In addition to filtering some sediments, hydrophobic wood sponges can also absorb many organic solvents, particularly crude oil. The leakage of crude oil poses a serious threat to the marine ecosystem, and oil mixed with water also generates great danger for its use. From the perspective of low cost and high performance, wood sponges exhibit great potential for dealing with crude oil pollution. Wood sponge is a renewable material. With a highly oriented layered structure and a highly compressible three-dimensional porous frame, wood sponges are extremely hydrophobic, making them ideal for oil-water separation. Currently, the most common approach for creating wood sponge is to first destroy the wood cell wall to obtain a porous-oriented layered structure and then enhance the oil-water separation ability via superhydrophobic treatment. Wood sponge prepared using various experimental methods and different natural woods exhibits distinctive properties in regards to robustness, compressibility, fatigue resistance, and oil absorption ability. As an aerogel material, wood sponge offers multi-action (absorption, filtration) and reusable oil-water separation functions. This paper introduces the advantages of the use of wood sponge for oil-water separation. The physical and chemical properties of wood sponge and its mechanism of adsorbing crude oil are explained. The synthesis method and the properties are discussed. Finally, the use of wood sponge is summarized and prospected.

Recent Advances in Superhydrophobic Surfaces and Applications on Wood

Superhydrophobic substances were favored in wood protection. Superhydrophobic treatment of wood is of great significance for improving the service life of wood and expanding its application fields, such as improving dimensional stability, durability, UV stability, and reducing wetting. The superhydrophobic phenomenon is attributed to the interaction of micro/nano hierarchical structure and low surface energy substances of the wood surface. This is the common method for obtaining superhydrophobic wood. The article introduces the common preparation methods of superhydrophobic wood material coatings and their mechanisms. These techniques include lithography, sol–gel methods, graft copolymerization, chemical vapor deposition, etc. The latest research progress of superhydrophobic wood material coatings application at domestic and overseas is reviewed, and the current status of superhydrophobic coating application in wood materials and construction is summarized. Finally, superhydrophobic on wood in the field of applied research is presented, and the development trend in the field of functional improvement of wood is foreseen.

Anisotropic Wooden Electromechanical Transduction Devices Enhanced by TEMPO Oxidization and PDMS

In order to increase the number and contact probability of electric dipole on cellulose, acid and alkali treatment was employed to extract hemicellulose and lignin from original wood to gain a highly oriented cellulose frame. The combined means with 2,2,6,6-tetramethylpiperidine-1-oxyl-NaBr-NaClO oxidation and impregnation of PDMS with compression was subsequently used to enhance its mechanical performance and electromechanical conversion. The assembled wooden electromechanical device (10 mm × 10 mm × 1 mm) exhibits the maximum open-circuit voltage (V _OC) of 11.75 V and short-circuit current (I _SC) of 211.01 nA as stepped by foot. It can be sliced to fabricate a flexible sensor with high sensitivity displaying V _OC of 2.88 V and I _SC of 210.09 nA under the tapped state. Its highly oriented wood fiber makes it display significant anisotropy in terms of mechanical and electromechanical performance for multidirectional sense. This strategy will exactly provide reference for developing other high-performance piezoelectric devices.

Hollow Mesoporous Microspheres Coating for Super-Hydrophobicity Wood with High Thermostability and Abrasion Performance

Super-hydrophobic phenomena generally exist in nature, and wood can also obtain hydrophobicity by specific processing on the surface, being like the construction of microscale rough surface or decoration with low surface energy materials. In this research, the formation of hydrophobic layers on wood surface was investigated without breaking the wood's original structure. The core-shell structure particles were prepared by penetrating orthosilicate and polystyrene into the hollow mesoporous microsphere structure with tetrahydrofuran. A wood sample was coated with polydimethylsiloxane (PDMS) resin layer to enhance the adhesion of nano and micron hollow mesoporous microsphere on its surface. According to the surface structure of super-hydrophobic subjects in nature, the nano and micron hollow mesoporous microsphere were sprayed with different ratios several times to form a hydrophobic surface. The water contact angle could reach 150°, revealing that the hydrophobic behavior of the nano and micron hollow mesoporous microsphere coating was achieved. The microstructures of wood samples were examined by the scanning electron microscopy, and the chemical functional groups were investigated by the Fourier transform infrared; both verified that the hydrophobic surface was successfully coated. The thermogravimetric examination revealed the improved thermal stability of the hydrophobic wood. The scratch test was used to measure the abrasion resistance of the nano and micron hollow mesoporous microsphere coatings on wood surface. It was suggested that the nano and micron hollow mesoporous microsphere coating was an effective method to fabricate extremely hydrophobic wood products.

Effect of Thermal Modification on the Nano-Mechanical Properties of the Wood Cell Wall and Waterborne Polyacrylic Coating

Masson pine (Pinus massoniana Lamb.) samples were heat-treated at different treatment temperatures (150, 170, and 190 °C), and the nano-mechanical properties of the wood cell wall, which was coated with a waterborne polyacrylic (WPA) lacquer product, were compared. The elastic modulus (Er) and hardness (H) of wood cell wall and the coating were measured and characterized by nanoindentation, and the influencing factors of mechanical properties during thermal modification were investigated by chemical composition analysis, contact angle analysis, and colorimetric analysis. The results showed that with the increase in the heat treatment temperature, the contact angle of the water on the wood’s surface and the colorimetric difference increased, while the content of the cellulose and hemicelluloses decreased. After thermal modification of 190 °C, the Er and H of the wood cell wall increased by 13.9% and 17.6%, respectively, and the Er and H of the WPA coating applied to the wood decreased by 12.1% and 22.2%. The Er and H of the interface between the coating and wood were lower than those near the coating’s surface. The Er and H of the cell wall at the interface between the coating and wood were lower than those far away from the coating. This study was of great significance for understanding the binding mechanism between coating and wood cell walls and improving the finishing technology of the wood materials after thermal modification.

Effect of Lignin Content on Properties of Flexible Transparent Poplar Veneer Fabricated by Impregnation with Epoxy Resin

In this work, poplar veneer (PV) rotary-cut from fast-growing polar was delignified to prepare flexible transparent poplar veneer (TPV). Lignin was gradually removed from the PV and then epoxy resin filled into the delignified PV. The study mainly concerns the effect of lignin content on microstructure, light transmittance, haze, tensile strength, and thermal stability of the PVs impregnated with epoxy resin. The results indicate that the lignin could be removed completely from the PV when the delignification time was around 8 h, which was proved by FTIR spectra and chemical component detection. Moreover, according to SEM observation and XRD testing, the porosity and crystallinity of the PVs were gradually increased with the removal of lignin. Also, the optical properties measurement indicated that the light transmittance and haze of the TPVs gradually increased, and the thermal stability also became more stable as shown by thermogravimetric analysis (TG). However, the tensile strength of the TPVs declined due to the removal of lignin. Among them, TPV8 exhibited excellent optical properties, thermal stability, and tensile strength. Consequently, it has great potential to be used as a substrate in photovoltaics, solar cells, smart windows, etc.