Metal Organic Framework-Polyethersulfone Composite Membrane for Iodine Capture

Enhanced Iodine Capture Using a Postsynthetically Modified Thione-Silver Zeolitic Imidazole Framework

Efficient management of radionuclides that are released from various processes in the nuclear fuel cycle is of significant importance. Among these nuclides, radioactive iodine (mainly 129I and 131I) is a major concern due to the risk it poses to the environment and to human health; thus, the development of materials that can capture and safely store radioactive iodine is crucial. Herein, a novel silver-thione-functionalized zeolitic imidazole framework (ZIF) was synthesized via postsynthetic modification and assessed for its iodine uptake capabilities alongside the parent ZIF-8 and intermediate materials. A solvent-assisted ligand exchange procedure was used to replace the 2-methylimidazole linkers in ZIF-8 with 2-mercaptoimidazole, forming intermediate compound ZIF-8 = S, which was reacted with AgNO3 to yield the ZIF-8 = S-Ag+ composite for iodine uptake. Despite possessing the lowest BET surface area of the derivatives, the Ag-functionalized material demonstrated superior I2 adsorption in terms of both maximum capacity (550 g I2/mol) and rapid kinetics (50% loading achieved in 5 h, saturation in 50 h) compared to that of our pristine ZIF-8, which reached 450 g I2/mol after 150 h and 50% loading in 25 h. This improvement is attributed to the presence of the Ag+ ions, which provide a strong chemical driving force to form a stable Ag-I species. The results of this study contribute to a broader understanding of the strategies that can be employed to engineer adsorbents with robust iodine uptake behavior.

Three-Dimensional-Network-Structured Bismuth-Based Silica Aerogel Fiber Felt for Highly Efficient Immobilization of Iodine

The effective capture and deposition of radioactive iodine in the spent fuel reprocessing process is of great importance for nuclear safety and environmental protection. Three-dimensional (3D) fiber felt with structural diversity and tunability is applied as an efficient adsorbent with easy separation for iodine capture. Here, a bismuth-based silica aerogel fiber felt (Bi@SNF) was synthesized using a facile hydrothermal method. Abundant and homogeneous Bi nanoparticles greatly enhanced the adsorption and immobilization of iodine. Notably, Bi@SNF demonstrated a high capture capacity of 982.9 mg/g by forming stable BiI3 and Bi5O7I phases, which was about 14 times higher than that of the unloaded material. Fast uptake kinetics and excellent resistance to nitric acid and radiation were exhibited as a result of the 3D porous interconnected network and silica aerogel fiber substrate. Adjustable size and easy separation and recovery give the material potential as a radioactive iodine gas capture material.

Synthesis of Aluminum-Based Metal-Organic Framework (MOF)-Derived Carbon Nanomaterials and Their Water Adsorption Isotherm

The characteristics of water vapor adsorption depend on the structure, porosity, and functional groups of the material. Metal-organic framework (MOF)-derived carbon (MDC) is a novel material that exhibits a high specific area and tunable pore sizes by exploiting the stable structure and porosity of pure MOF materials. Herein, two types of aluminum-based MOFs were used as precursors to synthesize hydrophobic microporous C-MDC and micro-mesoporous A-MDC via carbonization and activation depending on the type of ligands in the precursors. C-MDC and A-MDC have different pore characteristics and exhibit distinct water adsorption properties. C-MDC with hydrophobic properties and micropores exhibited negligible water adsorption (108.54 mgg-1) at relatively low pressures (P/P0~0.3) but showed a rapid increase in water adsorption ability (475.7 mgg-1) at relative pressures of about 0.6. A comparison with the isotherm model indicated that the results were consistent with the theories, which include site filling at low relative pressure and pore filling at high relative pressure. In particular, the Do-Do model specialized for type 5 showed excellent agreement.

Application of ZIF-8 nanocomposite membrane in microbial desalination cells for simultaneous heavy metal removal and biofouling prevention

Microbial desalination cells (MDC) syndicate the advantage of physical separation by using membranes to create conditions required for Bioelectrochemical processes for the treatment of various domestic and industrial wastewater, while simultaneously desalinating saline water and generating bioenergy. However, since the introduction of this technology, heavy metal removal has been a challenge, and membrane fouling has become a major bottleneck limiting the optimum performance and efficiency of this technology. This study incorporated the use of ZIF-8 nanocomposite membrane via phase inversion mechanism in MDC for simultaneous heavy metal removal and membrane biofouling prevention. The study was conducted in two MDC systems; MDC-Control (without the ZIF-8 nanocomposite membrane) and MDC with ZIF-8 nanocomposite membrane. The results from the experiment shown that maximum removal efficiency of 85.7%, 84.3%, 84.0%, and 90.61% was obtained for Cu²⁺, Zn²⁺, Pb^2+, and Cd²⁺ respectively in MDC-ZIF-8, while MDC control showed 54.17%, 59.71%, 51.94%, and 54.17%. The results were well fitted to the Langmuir adsorption isotherm with correlation coefficients (R²) > 0.99 in all cases for MDC-ZIF-8. A maximum adsorption capacity (Q_max) of 292 mg g^-1 was attained for all four metal ions in MDC-ZIF-8. Besides, after 38 days of continuous operation with two complete desalination for both systems, the SEM-EDS characterization analysis, polarization characteristics, and power generation revealed antifouling characteristics of ZIF-8 nanocomposite membrane incorporated in MDC. The integration of the ZIF-8 nanocomposite membrane proved to be simultaneously efficient in biofouling prevention and heavy metal removal without jeopardizing the system's ability for wastewater treatment, bioelectricity generation, and desalination processes.

Synthesis of Iron(II) Clathrochelate-Based Poly(vinylene sulfide) with Tetraphenylbenzene Bridging Units and Their Selective Oxidation into Their Corresponding Poly(vinylene sulfone) Copolymers: Promising Materials for Iodine Capture

The development of a simple and efficient synthetic methodology to engineer functional polymer materials for gas adsorption is necessary due to its relevance for various applications. Herein, we report the synthesis of metalorganic poly(vinylene sulfide) copolymers CTP1-3 with iron(II) clathrochelate of various side groups connected by tetraphenylbenzene units. CTP1-3 were subsequently oxidized into their respective poly(vinylene sulfone) copolymers CTP4-6 under green reaction conditions. The target copolymers CTP1-6 were characterized using various instrumental analysis techniques. Examination of the iodine adsorption properties of the copolymers revealed high iodine uptake properties, reaching 2360 mg g−1 for CTP2, and whose reusability tests proved its efficient regeneration, thus proving the importance of iron(II) clathrochelate polymers in iodine capture.

Zeolitic imidazolate framework-8/Bacterial Cellulose Composite for Iodine Loading and Its Antibacterial Performance

Bacterial cellulose (BC), produced by bacteria and fungi, is a promising material in the biomedical field. However, non-antibacterial activity limits its broad applications. Herein, antibacterial composites (BC/ZIF-8-Iodine) were prepared by...

Carbon Dioxide Enrichment PEBAX/MOF Composite Membrane for CO2 Separation

Zeolitic imidazole framework (ZIF-8) was incorporated into poly(ether-block-amide) (Pebax-1657) in differing ratios to prepare mixed matrix membranes (MMMs) for gas separation. As ZIF-8 loading is increased, gas separation selectivity also gradually increases. For economic considerations, the proportion of the increase in selectivity to the amount of MOF loaded per unit was calculated. The results show that mixing 5% MOF gives the best unit performance. With this, a variety of MOFs (UiO-66, UiO-66-NH₂, A520, MIL-68(Al) and MIL-100(Fe)) were mixed with PEBAX at 5 loading to prepare MMMs. In this work, metal-organic frameworks (MOFs) were processed using the dry-free method, where in the synthesized MOF was not dried prior to incorporation. The gas separation performance test carried out shows the highest separation performance was exhibited by P-UiO-66, wherein the CO₂/N₂ gas selectivity was 85.94, and the permeability was 189.77 (Barrer), which was higher than Robeson’s Upper bound in 2008, and obtained a high permeability and selectivity among mixed matrix membranes. In the preparation of high quality MMMs for gas separation, details regarding the interface phenomenon were assessed.