Hydrogels Based on Imino-Chitosan Amphiphiles as a Matrix for Drug Delivery Systems

Citryl-Imino-Chitosan Xerogels as Promising Materials for Mercury Recovery from Waste Waters

The present study reported the obtention of xerogels based on chitosan and citral and their use as materials for mercury ion recovery from aqueous solutions, this being a serious problem related to the environment. The systems were prepared by the acid condensation of chitosan with citral, followed by the lyophilization of the resulting hydrogels, in order to obtain highly porous solid materials. The structural, morphological and supramolecular characterization of the systems was performed using 1H-NMR and FTIR spectroscopy, scanning electron microscopy and wide-angle X-ray diffraction. The ability of the obtained materials to be used for the recovery of mercury from aqueous solutions revealed the high potential of the xerogels to be used in this sense, the analysis of the materials post mercury absorption experiments revealing that this ability is predominantly conferred by the imine linkages which act as coordinating moieties for mercury ions.

Drug delivery based on a supramolecular chemistry approach by using chitosan hydrogels

Microbial infections are a serious healthcare related problem, causing several complications and even death. That is why, the development of new drug delivery systems with prolonged effect represents an interesting research topic. This study presents the synthesis and characterization of new hydrogels based on chitosan and three halogenated monoaldehydes. Further, the hydrogels were used as excipients for the development of drug delivery systems (DDS) by the incorporation of fluconazole, an antifungal drug. The systems were structurally characterized by Fourier Transformed Infrared Spectroscopy and Nuclear Magnetic Resonance, both methods revealing the formation of the imine linkages between chitosan and the aldehydes. The samples presented a high degree of ordering at supramolecular level, as demonstrated by WXRD and POM and a good water-uptake, reaching a maximum of 1.6 g/g. The obtained systems were biodegradable, loosing between 38 and 49 % from their initial mass in the presence of lysozyme in 21 days. The ability to release the antifungal drug in a sustained manner for seven days, along with the high values of the inhibition zone diameter, reaching a maximum of 64 mm against Candida parapsilosis for the chlorine containing sample, recommend these systems as promising materials for bioapplications.

Chitosan-Based Composites: Development and Perspective in Food Preservation and Biomedical Applications

Chitin, which may be the second-most common polymer after cellulose, is the raw material of chitosan. Chitosan has been infused with various plant extracts and subsidiary polymers to improve its biological and physiological properties. Chitosan's physicochemical properties are enhanced by blending, making them potential candidates that can be utilized in multifunctional areas, including food processing, nutraceuticals, food quality monitoring, food packaging, and storage. Chitosan-based biomaterials are biocompatible, biodegradable, low toxic, mucoadhesive, and regulate chemical release. Therefore, they are used in the biomedical field. The present manuscript highlights the application of chitosan-based composites in the food and biomedical industries.

New Hydrogels and Formulations Based on Piperonyl-Imino-Chitosan Derivatives

Candida infections have been always a serious healcare related problem. The present study reports the preparation of hydrogels and formulations based on piperonyl-imino-chitosan derivatives and Amphotericin B drug for the treatment of Candida infections. The hydrogels were obtained by the imination reaction of chitosan with piperonal monoaldehyde, followed by the self-assembling of the resulted imines, while the formulations were obtained by an in situ hydrogelation method of chitosan with piperonal in the presence of Amphotericin B antifungal drug. The structural characterization of both hydrogels and formulations by Fourier transform infrared spectroscopy and Nuclear magnetic resonance spectroscopy revealed the formation of imine units between the reagents, while their supramolecular characterization using polarized optical microscopy and wide angle X-ray diffraction demonstrated that hydrophilic/hydrophobic segregation is the process which governed the formation of gel like systems. The systems were further investigated from the point of view of their further applications revealing that they were biodegradable, presented high swelling ability and were able to release the antifungal drug in a sustained manner, presenting promising antifungal activity against five Candida strains.

Chitosan Schiff-Base Hydrogels-A Critical Perspective Review

Chitosan is quite a unique polysaccharide due to the presence of the amine groups naturally occurring in its structure. This feature renders it into a polycation which makes it appealing for preparing polyelectrolyte complexes or imine bonds gels. Therefore, the vast majority of hydrogels prepared using Schiff base chemistry have chitosan as one component. Usually, the counterpart is a low molecular weight aldehyde or a macromolecular periodate-oxidized polysaccharide, i.e., cellulose, pullulan, starch, alginate, hyaluronic acid, etc. Indisputable advantages of hydrogels include their quick gelation, no need for crosslinking agents, and self-healing and injectability properties. This gives grounds for further research, both fundamental in materials science and applicative in various domains. This article is a critical assessment of the most relevant aspects of this topic. It also provides a short review of some of the most interesting research reported in the literature supporting the main observations of this perspective.

Implications of Sphingolipid Metabolites in Kidney Diseases

Sphingolipids, which act as a bioactive signaling molecules, are involved in several cellular processes such as cell survival, proliferation, migration and apoptosis. An imbalance in the levels of sphingolipids can be lethal to cells. Abnormalities in the levels of sphingolipids are associated with several human diseases including kidney diseases. Several studies demonstrate that sphingolipids play an important role in maintaining proper renal function. Sphingolipids can alter the glomerular filtration barrier by affecting the functioning of podocytes, which are key cellular components of the glomerular filtration barrier. This review summarizes the studies in our understanding of the regulation of sphingolipid signaling in kidney diseases, especially in glomerular and tubulointerstitial diseases, and the potential to target sphingolipid pathways in developing therapeutics for the treatment of renal diseases.

Magnesium Orotate and the Microbiome-Gut-Brain Axis Modulation: New Approaches in Psychological Comorbidities of Gastrointestinal Functional Disorders

Magnesium orotate has been cited in the medical literature for the past three years as a possible adjuvant in some pediatric and adult gastroenterological disorders associated with dysbiosis. Studies also focus on the possibility of adding magnesium orotate in psychiatric disorders' treatment, such as major depression and anxiety. The most relevant element in these studies is the efficiency of magnesium orotate therapy in cases with both gastroenterological and psychiatric symptoms. This article proposes a literature review, focused on the studies published in the last three years, targeting magnesium orotate treatment and probiotic supplementation in patients with both digestive and psychiatric symptoms. Moreover, this review will compare the efficiency of magnesium orotate and probiotics within both the pediatric and adult communities, focusing on the possibility of gut-brain axis modulation and its involvement in the clinical evolution of these patients.

Synthesis of Bioactive Materials by In Situ One-Step Direct Loading of Syzygium aromaticum Essential Oil into Chitosan-Based Hydrogels

Hydrogel conjugates based on chitosan and an essential oil were synthetized by an ultrasound-assisted emulsification approach. Rheology studies revealed a gel-type structure with pronounced compactness and flexibility while SEM showed the formation of a two-level ordered network with highly interconnected pores. The swelling studies indicated a pH-dependent behavior with a significant overshooting effect. The synergistic effects of the components in clove essential oil led to a strong antioxidant character and an enhanced antimicrobial activity of the conjugate hydrogels. The bioactivity was maintained for 6 months, despite a slight decrease in the antimicrobial effect. Hydrogel conjugates were found to be very stable even after two months immersed in acidic solutions that would otherwise dissolve the chitosan matrix. Ultrasound emulsification was proved as an efficient one-step loading method of hydrophobic clove essential oil into hydrophilic chitosan matrix. It was found that clove oil and its components have a double role. Besides providing bioactivity, they also behave as gelation-inducing agents, acting as an alternative to the classical chemical cross-linkers to ensure the good physical and chemical stabilization of chitosan.

Effects of Al substitution on sorption of diclofenac to Fe(III) (hydr)oxides: roles of phase transition and sorption mechanisms

Fe(III) (hydr)oxides commonly contained many metal impurities such as Al. The incorporation of Al might change the properties of minerals and consequently affect sorption behaviors of pollutants with polar functional groups (e.g., diclofenac (DCF)). In this study, batch experiments and microscale characterization were conducted to investigate the DCF sorption mechanisms to goethite and Al-substituted minerals. Goethite and Al-substituted products (including Al-goethite, Al-goethite-hematite, and Al-hematite) were synthesized with different Al contents (i.e., 0%, 5%, 10%, and 15% (in mol)) by co-precipitation method. Due to difference of ionic radius between Al and Fe and formation of excessive -OH, Al substitution resulted in deviation of cell parameters from the Vegard line. Al substitution caused increasing -OH in Al-goethite and phase transformation caused decreasing -OH in Al-hematite. The total -OH in minerals was positively related to DCF sorption capacity. In the lower initial concentration range (0.4-9 mg/L), the sorption distribution coefficient (Kd) values of goethite, Al-goethite, and Al-hematite were 21.98, 22.25, and 21.18 L/kg, respectively. Desorption characteristics and ion strength effects indicated that DCF sorption to minerals occurred mainly through outer-sphere complexation. Fourier transform infrared analyses revealed that H-bonds could be formed through -OH of minerals and -COOH of DCF, and the H-bond strength on Al-hematite was stronger than that on goethite/Al-goethite. In the normal environmental pH (e.g., 6.0 to 8.0), Kd values of DCF decreased linearly with increasing pH. These findings are helpful for understanding of DCF migration in environment involving Al-substituted minerals.

Iminoboronate-chitooligosaccharides hydrogels with strong antimicrobial activity for biomedical applications

The paper reports hydrogels prepared from chitooligosaccharides with different polymerization degrees (14 to 51), by crosslinking with 2-formylphenylboronicacid in three molar ratios of their functionalities. The structural, morphological and supramolecular characterization confirmed a hydrogelation mechanism based on self-assembling of newly formed imine units and porous morphology. Rheological measurements confirmed the formation of thixotropic hydrogels, and swelling tests indicated mass equilibrium swelling values up to 25 in water and 9 in phosphate buffer saline. The monitoring of enzymatic degradability demonstrated the enhancing of biodegradation rate as long as the polymerization degrees of the oligomers decreased, the mass loss increasing from 16% to 43%. In vivo and ex-vivo biocompatibility investigation on experimental mice showed no cytotoxic effect, and in vitro antimicrobial tests revealed remarkable antimicrobial properties on nine strains, with a maximum inhibition diameter of 49 mm on Aspergilius brasiliensis and very good results on Cladosporium cladosporioides, Penicillium crysogenum and different Candida species.

Prospects and Challenges of the Drug Delivery Systems in Endometriosis Pain Management: Experimental and Theoretical Aspects

Endometriosis is considered a serious public health issue because of the large number of females affected by this illness. Chronic pain management in patients with endometriosis demands new strategies to increase the life quality of these patients. The development of drug delivery systems represents a new approach in pain treatment among endometriosis patients. Diclofenac sodium, one of the most utilized nonsteroidal anti-inflammatory drugs (NSAID), has its own limitations when being used in formulas such as oral, parental, or local applications. In this paper, a series of four drug release formulations based on chitosan, 2-hydroxy-5-nitrobenzaldehyde, and diclofenac sodium salt were prepared in view of the investigation of the drug release ability. The formulations were analyzed from a morphological and supramolecular point of view by scanning electron microscopy and polarized light microscopy. The in vitro drug release ability was investigated by mimicking a physiologic environment. A mathematical model, using the fractal paradigm of motion, is utilized to explain the behaviors of the drug delivery system presented in this paper. These results suggest a great potential of the proposed drug delivery system, based on chitosan and 2-hydroxy-5-nitrobenzaldehyde to improve the diclofenac sodium salt bioavailability, and it may represent a future treatment formula for endometriosis pain.

Amphiphilic chitosan-g-poly(trimethylene carbonate) - A new approach for biomaterials design

The paper presents the synthesis and characterization of poly(trimethylene carbonate) grafted chitosan as a new water soluble biopolymer suitable for in vivo applications. The synthesis was performed via ring-opening polymerization of 1,3-dioxan-2-one (trimethylene carbonate) (TMC) monomer, initiated by the functional groups of chitosan in the presence of toluene as solvent/swelling agent. By varying the molar ratio between the glucosamine units of chitosan and TMC, a series of chitosan derivatives with different content of poly(trimethylene carbonate) chains was synthetized. The structural characterization of the polymers was realized by FTIR and ¹H NMR spectroscopy and their solubility was assessed in water and in organic solvents as well. The biocompatibility was investigated by MTS assay on Normal Human Dermal Fibroblasts, and the biodegradability was evaluated in lysozyme buffer solution. Further, the surface properties of the polymer films were analyzed by polarized optical microscopy, atomic force microscopy and water-to-air contact angle measurements. It was established that, by 5% substitution of chitosan with poly(trimethylene carbonate) chains having an average polymerization degree of 7, a water soluble polymer can be attained. Compared to the pristine chitosan, it has improved biocompatibility in solution and moderate wettability and higher biodegradability rate in solid state, pointing its suitability for in vivo applications.

Chitosan crosslinking with pyridoxal 5-phosphate vitamer toward biocompatible hydrogels for in vivo applications

Vitamin B6 is an essential micronutrient in the mammalian diet, with role of coenzyme and synergistic effect with some antibiotics and antitumor drugs. Based on these, we hypothesized that its use for the preparation of hydrogels can yield multifunctional biomaterials suitable for in vivo applications. To this aim, chitosan was reacted with the active form of vitamin B6, pyridoxal 5-phosphate, via acid condensation, when clear hydrogels were obtained. Their investigation by structural characterization methods proved that the hydrogelation was a consequence of both covalent imine formation and physical interactions. The novel hydrogels had microporous morphology and showed shrinking effect in phosphate buffer, indicating good shape preservation and slow dissolution in in vivo environment. Their enzymatic biodegradation could be controlled by the imination degree, varying from 40 to 61% in 21 days. They demonstrated very good in vitro cytocompatibility on normal human dermal fibroblasts cells and no harmful effect on experimental mice, confirming their safely use for in vivo application.

Pluronic F127 micelles improve the stability and enhance the anticancer stem cell efficacy of citral in breast cancer

Aim: Improving the stability and anti-cancer stem cell (CSC) activity of citral, a natural ALDH1A inhibitor. Materials & methods: Citral-loaded micelles (CLM) were obtained using Pluronic^® F127 and its efficacy tested on the growth of four breast cancer cell lines. The impact of the CLM on the growth and functional hallmarks of breast CSCs were also evaluated using mammosphere and CSC reporter cell lines. Results: CLM improved the stability and growth inhibitory effects of citral. Importantly, CLM fully blocking the stemness features of CSCs (self-renewal, differentiation and migration) and in combination with paclitaxel CLM sensitized breast cancer cells to the chemotherapy. Conclusion: Targeting CSCs with CLM could improve the treatment of advanced breast cancer in combination with the standard chemotherapy.

Nanomaterials and Essential Oils as Candidates for Developing Novel Treatment Options for Bovine Mastitis

Nanomaterials have been used for diagnosis and therapy in the human medical field, while their application in veterinary medicine and animal production is still relatively new. Nanotechnology, however, is a rapidly growing field, offering the possibility of manufacturing new materials at the nanoscale level, with the formidable potential to revolutionize the agri-food sector by offering novel treatment options for prevalent and expensive illnesses such as bovine mastitis. Since current treatments are becoming progressively more ineffective in resistant bacteria, the development of innovative products based on both nanotechnology and phytotherapy may directly address a major global problem, antimicrobial resistance, while providing a sustainable animal health solution that supports the production of safe and high-quality food products. This review summarizes the challenges encountered presently in the treatment of bovine mastitis, emphasizing the possibility of using new-generation nanomaterials (e.g., biological synthesized nanoparticles and graphene) and essential oils, as candidates for developing novel treatment options for bovine mastitis.