Effect of Thermal Aging on the Physico-Chemical and Optical Properties of Poly(ester urethane) Elastomers Designed for Passive Damping (Pads) of the Railway

Chemical Structure and Thermal Properties versus Accelerated Aging of Bio-Based Poly(ether-urethanes) with Modified Hard Segments

Aging of polymers is a natural process that occurs during their usage and storage. Predicting the lifetime of polymers is a crucial aspect that should be considered at the design stage. In this paper, a series of bio-based thermoplastic poly(ether-urethane) elastomers (bio-TPUs) with modified hard segments were synthesized and investigated to understand the structural and property changes triggered by accelerated aging. The bio-TPUs were synthesized at an equimolar ratio of reagents using the prepolymer method with the use of bio-based poly(trimethylene ether) glycol, bio-based 1,3-propanediol, and hexamethylene diisocyanate or hexamethylene diisocyanate/partially bio-based diisocyanate mixtures. The polymerization reaction was catalyzed by dibutyltin dilaurate (DBTDL). The structural and property changes after accelerated aging under thermal and hydrothermal conditions were determined using Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and dynamic mechanical thermal analysis (DMTA). Among other findings, it was observed that both the reference and aged bio-TPUs decomposed in two main stages and exhibited thermal stability up to approximately 300 °C. Based on the research conducted, it was found that accelerated aging impacts the supramolecular structure of TPUs.

Clear polyurethane coatings with excellent virucidal properties: Preparation, characterization and rapid inactivation of human coronaviruses 229E and SARS-CoV-2

Commercial polyurethane (PU) coating formulations have been modified with 1-(hydroxymethyl)-5,5-dimethylhydantoin (HMD) both in bulk (0.5 and 1% w/w) and onto the coatings surface as an N-halamine precursor, to obtain clear coatings with high virucidal activity. Upon immersion in diluted chlorine bleaching, the hydantoin structure on the grafted PU membranes was transformed into N-halamine groups, with a high surface chlorine concentration (40-43μg/cm²). Fourier transform infrared spectroscopy (FTIR) spectroscopy, thermogravimetric analysis (TGA), energy-dispersive X-ray (EDX), X-ray photoelectron spectroscopy (XPS) and iodometric titration were used to characterize the coatings and quantify the chlorine contents of the PU membranes after chlorination. Biological evaluation of their activity against Staphylococcus aureus (Gram-positive bacteria) and human coronaviruses HCoV-229E and SARS-CoV-2 was performed, and high inactivation of these pathogens was observed after short contact times. The inactivation of HCoV-229E was higher than 98% for all modified samples after just 30 minutes, whereas it was necessary 12 hours of contact time for complete inactivation of SARS-CoV-2. The coatings were fully rechargeable by immersion in diluted chlorine bleach (2% v/v) for at least 5 chlorination-dechlorination cycles. Moreover, the performance of the antivirus efficiency of the coatings is considered as long-lasting, because experiments of reinfection of the coatings with HCoV-229E coronavirus did not show any loss of the virucidal activity after three consecutive infection cycles without reactivation of the N-halamine groups.

The Influence of Diisocyanate Structure on Thermal Stability of Thermoplastic Polyurethane Elastomers Based on Diphenylmethane-Derivative Chain Extender with Sulfur Atoms

The work is a continuation of the research on thermoplastic polyurethane (TPU) elastomers containing sulfur atoms which are incorporated into the polyurethane chain using aliphatic-aromatic chain extenders. These materials show some improved properties in relation to conventional ones, e.g., adhesion to metals, bacterial resistance and refractive index. The present study deals with the detailed characteristics of the process of thermal decomposition of TPU elastomers obtained from 2,2'-[methylenebis(1,4-phenylenemethylenethio)]diethanol, 1,1'-methanediylbis(4-isocyanatobenzene) (MDI) or 1,6-diisocyanatohexane (HDI) and poly(oxytetramethylene) diol of M_n = 2000 g/mol by thermogravimetric analysis coupled on-line with Fourier transform infrared spectroscopy. The analysis was performed under inert and oxidative conditions. All TPU elastomers were found to have a relatively good thermal stability, with those based on aromatic diisocyanate being at an advantage. In helium, they are stable up to 280-282 °C (from HDI) and 299-301 °C (from MDI), whereas in synthetic air up to 252-265 °C (from HDI) and 261-272 °C (from MDI), as measured by the temperature of 1% mass loss. Depending on the content of the hard segments and the tested atmosphere, the TPU elastomers decompose from one to four stages. From the analysis of the volatile decomposition products, it follows that the decomposition of both types of hard segments was accompanied by the evolution of carbonyl sulfide, carbon dioxide, water, sulfide dioxide, alcohols and aromatic compounds. For the hard segment derived from HDI, isocyanates, amines, and unsaturated compounds were also identified, while for the MDI-derived one, aldehydes were discovered. In turn, the polyether soft segment decomposed mainly into aliphatic ethers, aldehydes, and carbon monoxide.

Rapeseed oil gallate-amide-urethane coating material: Synthesis and evaluation of coating properties

The present manuscript describes the synthesis of urethane (ROGAU) coating material from Rapeseed oil (RO), Gallic acid (GA) and Toluylene-2,4-diisocyanate [TDI], for the first time. The reaction was accomplished in the following steps: (i) amidation of RO, producing diol fatty amide, HERA, followed by (ii) gallation reaction of HERA with GA, resulting in RO-based gallate amide (ROGA). The structural elucidation by FTIR and NMR confirmed the insertion of amide and ester moieties in the ROGA backbone. To add applicational value to ROGA, it was then derivatized by urethanation reaction with TDI to develop ambient temperature-cured ROGAU, as a corrosion protective coating material. ROGAU coatings were scratch resistant, well-adherent, and flexible to a considerable extent and showed good corrosion resistance performance toward saline medium (3.5 wt% NaCl). ROGAU coatings can be safely used up to 200°C.