Greener, Faster, Stronger: The Benefits of Deep Eutectic Solvents in Polymer and Materials Science

Deep eutectic solvent and styrene copolymer-shelled magnetic microspheres for the capture of Ovomucoid in foods and their interactions

Fe3O4 is a cost-effective and strong magnetic core, meanwhile polymerizable deep eutectic solvents (PDESs) are considered to have excellent performance and biocompatibility in separation and material fields. Therefore, the aim was to prepare magnetic microspheres (P(DES-co-St)@Fe3O4) with Fe3O4 as the core and PDESs (choline chloride/acrylic acid, 1:2; choline chloride/itaconic acid, 1:1)-styrene (St) copolymer as the shell for binding of target protein. The resulting microspheres exhibited ideal magnetic responsiveness (14.14 emu·g-1), stability, dispersion and uniformity (average diameter of 1.04 μm). The acidic PDESs endowed the surface structure of magnetic microspheres with numerous carboxyl groups (3.71 mmol·g-1), providing multiple active sites to capture allergenic proteins (ovomucoid, ovotransferrin, ovalbumin) from foods. Under current conditions, the binding capacity of ovomucoid was determined to be 155.3 mg·mL-1. Kinetic and thermodynamic studies, along with fluorescence spectroscopy and molecular simulations, indicated that the magnetic microspheres bind with ovomucoid through a combination of monolayer multiple interactions with selectivity.

Applications of Functional Polymeric Eutectogels

Over the past two decades, deep eutectic solvents (DESs) have captured significant attention as an emergent class of solvents that have unique properties and applications in differing fields of chemistry. One area where DES systems find utility is the design of polymeric gels, often referred to as "eutectogels," which can be prepared either using a DES to replace a traditional solvent, or where monomers form part of the DES themselves. Due to the extensive network of intramolecular interactions (e.g., hydrogen bonding) and ionic species that exist in DES systems, polymeric eutectogels often possess appealing material properties-high adhesive strength, tuneable viscosity, rapid polymerization kinetics, good conductivity, as well as high strength and flexibility. In addition, non-covalent crosslinking approaches are possible due to the inherent interactions that exist in these materials. This review considers several key applications of polymeric eutectogels, including organic electronics, wearable sensor technologies, 3D printing resins, adhesives, and a range of various biomedical applications. The design, synthesis, and properties of these eutectogels are discussed, in addition to the advantages of this synthetic approach in comparison to traditional gel design. Perspectives on the future directions of this field are also highlighted.

Application of magnetic deep eutectic solvents as an efficient catalyst in the synthesis of new 1,2,3-triazole-nicotinonitrile hybrids via a cooperative vinylogous anomeric-based oxidation

Magnetic deep eutectic solvents (MDESs) are adjuvants and an emerging subclass of heterogeneous catalysts in organic transformations. Herein, choline chloride (Ch/Cl) embedded on naphthalene bis-urea-supported magnetic nanoparticles, namely, Fe3O4@SiO2@DES1, was constructed by a special approach. This compound was scrutinized and characterized by instrumental techniques such as FTIR, thermogravimetry and derivative thermogravimetry (TGA/DTG), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDS), elemental mapping, vibrating sample magnetometer (VSM) and X-ray diffraction (XRD) analyses. Potential catalytic activity of Fe3O4@SiO2@DES1 was impressive, facilitating the synthesis of new 1,2,3-triazole-nicotinonitrile hybrids via a multicomponent method with 65-98% yields. Enhanced rates, high yields, mild reaction conditions, and recycling and reusability of Fe3O4@SiO2@DES1 are the distinct benefits of this catalytic organic synthetic methodology.

Conformational Geometry Matters: The Case of the Low-Melting-Point Systems of Tetrabutylammonium Triflate with Fumaric or Maleic Acid

For this article, the interaction of tetrabutylammonium trifluoromethanesulfonate (TBATFO) with either fumaric (FUM) or maleic (MAL) acid has been investigated. These acids are isomers and can be considered the trans and cis configurations of the same molecular geometry. When TBATFO is mixed with FUM, an eutectic point is obtained for a relative composition of 90-10 (molar ratio), with a melting point of ≈90 °C. If maleic acid is mixed with TBATFO, one obtains an inhomogeneous phase with the retention of a solid portion immersed in a liquid phase, even above 90 °C. DFT calculations helped to model the interaction between the components. It is suggested herein that TBATFO interacts more strongly with FUM than with MAL, due to possible interactions in two different sites for hydrogen bonding (HB) in FUM. In MAL, one of the HB sites is instead retained in the intramolecular interactions; therefore, fewer sites are available for intermolecular interactions. Infrared spectroscopy measurements have confirmed this scenario, in which the hydrogen bonds of the acid molecules are replaced by HB between the acid and the ionic couple: for both kinds of mixtures, the vibration region of the OH bonds is strongly affected by mixing. However, in the case of FUM, the vibrations of the SO3 group of the TFO anion are displaced, while they remain in practically the same frequency position in the case of MAL.

"Dissolve-on-Demand" 3D Printed Materials: Polymerizable Eutectics for Generating High Modulus, Thermoresponsive and Photoswitchable Eutectogels

Solvent-free photopolymerization of vinyl monomers to produce high modulus materials with applications in 3D printing and photoswitchable materials is demonstrated. Polymerizable eutectic (PE) mixtures are prepared by simply heating and stirring various molar ratios of N-isopropylacrylamide (NIPAM), acrylamide (AAm) and 2-hydroxyethyl methacrylate (HEMA). The structural and thermal properties of the resulting mixtures are evaluated by 1D and 2D NMR spectroscopy as well as differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). UV photocuring kinetics of the PE mixtures is evaluated via in situ photo-DSC and photorheology measurements. The PE mixtures cure rapidly and display storage moduli that are orders of magnitude greater than equivalent copolymers cured in an aqueous medium. The versatility of these PE systems is demonstrated through the addition of a photoswitchable spiropyran acrylate monomer, as well as applying the PE formulation as a stereolithography (SLA)-based 3D printing resin. Due to the hydrogen-bonding network in PE systems, 3D printing of the eutectic resin is possible in the absence of crosslinkers. The addition of a RAFT agent to reduce average polymer chain length enables 3D printing of materials which retain their shape and can be dissolved on demand in appropriate solvents.

Use of deep eutectic solvents in environmentally-friendly dye-sensitized solar cells and their physicochemical properties: a brief review

A novel way to mitigate the greenhouse effect is to use dye-sensitized solar cells (DSSCs) to convert carbon dioxide from the air into useful products, such as hydrocarbons, which can also store energy from the sun, a plentiful, clean, and safe resource. The conversion of CO2 can help reduce the impacts of greenhouse gas emissions that contribute to global warming. However, there is a major obstacle in using DSSCs, since many solar devices operate with organic electrolytes, producing pollutants including toxic substances. Therefore, a key research area is to find new eco-friendly electrolytes that can effectively dissolve carbon dioxide. One option is to use deep eutectic solvents (DESs), which are potential substitutes for ionic liquids (ILs) and have similar advantages, such as being customizable, economical, and environmentally friendly. DESs are composed of low-cost materials and have very low toxicity and high biodegradability, making them suitable for use as electrolytes in DSSCs, within the framework of green chemistry. The purpose of this brief review is to explore the existing knowledge about how CO2 dissolves in DESs and how these solvents can be used as electrolytes in solar devices, especially in DSSCs. The physical and chemical properties of the DESs are described, and areas are suggested where further research should be focused.

Menthol-Based (Deep) Eutectic Solvents: A Review on Properties and Application in Extraction

In the last 10 years the interest in deep eutectic solvents (DESs) as a new class of green solvents has considerably increased. The emergence of numerous of hydrophobic DESs has stimulated intensive research into their application in extraction technologies, including sample preparation. As the properties of such systems are highly dependent on the properties of their components (hydrogen bond donors and acceptors) and can be finely tuned, DESs can be successfully used for the extraction of both metal ions and organic substances, including biomolecules. Despite the rapidly increasing number of publications on the use of DESs as an extraction medium, including review articles, information on the extraction properties of DESs in terms of their chemical composition has not yet been summarized. This review covers available literature data on the physicochemical properties of menthol-based eutectic solvents and the results of their practical application as an extraction medium. Also, the appropriateness of using the term "DES" for all mixtures with melting points lower than the melting points of their components is discussed.

Deep eutectic solvents in sample preparation and determination methods of pesticides: Recent advances and future prospects

This review summarizes recent advances of deep eutectic solvents (DESs) in sample preparation and determination methods of pesticides in food, environmental, and biological matrices since 2019. Emphasis is placed on new DES categories and emerging microextraction techniques. The former incorporate hydrophobic deep eutectic solvents, magnetic deep eutectic solvents, and responsive switchable deep eutectic solvents, while the latter mainly include dispersive liquid-liquid microextraction, liquid-liquid microextraction based on in-situ formation/decomposition of DESs, single drop microextraction, hollow fiber-liquid phase microextraction, and solid-phase microextraction. The principles, applications, advantages, and limitations of these microextraction techniques are presented. Besides, the use of DESs in chromatographic separation, electrochemical biosensors, fluorescent sensors, and surface-enhanced Raman spectroscopy are discussed. This review is expected to provide a valuable reference for extracting and detecting pesticides or other hazardous contaminants in the future.

Synthesis and Characterization of Cardanol-Based Non-Isocyanate Polyurethane

This paper describes the synthesis of NIPU by using cardanol as starting material. A cardanol formaldehyde oligomer was first prepared through the reaction of cardanol and formaldehyde, catalyzed by citric acid. The resulting oligomer was then subjected to epoxidation with m-chloroperbenzoic acid to obtain an epoxide compound, which was subsequently used to fix carbon dioxide (CO2) and form a cyclic carbonate. Using this cyclic carbonate, along with an amine, cardanol-based isocyanate polyurethane (NIPU) was prepared. Different characterization methods, such as Fourier transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance (NMR), gel permeation chromatography (GPC), and thermogravimetric analysis (TGA), were used to confirm the synthesis of the four intermediate products and NIPU in the reaction process. This study highlights the promise of bio-based NIPU as a sustainable alternative in a number of applications while offering insightful information on the synthesis and characterization of the material.

Unexpected mechanically robust ionic conductive elastomer constructed from an itaconic acid-involved polymerizable DES

An ionic conductive elastomer with good comprehensive properties is constructed from a ternary polymerizable deep eutectic solvent (PDES) containing choline chloride, acrylic acid and itaconic acid (IA). The IA component is found to boost the synergetic hydrogen bonds and greatly improve the mechanical strength of elastomer.

Untapped Potential of Deep Eutectic Solvents for the Synthesis of Bioinspired Inorganic-Organic Materials

Since the discovery of deep eutectic solvents (DESs) in 2003, significant progress has been made in the field, specifically advancing aspects of their preparation and physicochemical characterization. Their low-cost and unique tailored properties are reasons for their growing importance as a sustainable medium for the resource-efficient processing and synthesis of advanced materials. In this paper, the significance of these designer solvents and their beneficial features, in particular with respect to biomimetic materials chemistry, is discussed. Finally, this article explores the unrealized potential and advantageous aspects of DESs, focusing on the development of biomineralization-inspired hybrid materials. It is anticipated that this article can stimulate new concepts and advances providing a reference for breaking down the multidisciplinary borders in the field of bioinspired materials chemistry, especially at the nexus of computation and experiment, and to develop a rigorous materials-by-design paradigm.

Deep eutectic solvents induced changes in the phase transition behavior of smart polymers: a sustainable future approach

Deep eutectic solvents (DESs) are considered "green" and "sustainable" alternatives to conventional organic solvents and ionic liquids (ILs) due to their characteristic properties and relatively low costs. DESs are considered IL analogs and have attracted consideration as benign media formulations for the synthesis of novel polymers because they satisfy the principle of sustainability. Over the past few years, the use of DESs has resulted in novel pathways for the synthesis of novel materials, biomaterials, functional materials, and ionic soft materials. Furthermore, DESs have been widely applied in the science, industrial, engineering, and technological fields. On the other hand, stimulus-responsive (smart) polymers have been widely utilized in intelligent devices owing to their virtues of good processibility, stimuli and environmental sensitivity, responsivity, and so on. With the introduction of a DES into the smart polymeric matrices, their potential characteristics, biocompatibility, and flexibility endow the corresponding DES-based polymeric materials with intriguing properties, which in turn will broaden their applications in various domains of polymer science and material chemistry. Substantial research has been done in the fabrication of DES-based polymeric materials. Numerous studies have extensively investigated the effects of DESs on biomolecules such as proteins/enzymes and nucleic acids, whereas few have addressed the impact of DESs on the aggregation and phase transition behaviors of smart polymers. This review focuses on mechanistic insights, aggregation behavior, and interactions between smart polymers and DESs. Opportunities and future research perspectives in this blossoming arena are also discussed. It is hoped that this review will pave futuristic pathways for the design and development of advanced DES-based polymeric materials and biomaterials for various applications.

Deep eutectic solvent-ultrasound assisted extraction as a green approach for enhanced extraction of naringenin from Searsia tripartita and retained their bioactivities

Background

Naringenin (NA) is a natural flavonoid used in the formulation of a wide range of pharmaceutical, fragrance, and cosmetic products. In this research, NA was extracted from Searsia tripartita using an environmentally friendly, high efficiency extraction method: an ultrasound-assisted extraction with deep eutectic solvents (UAE-DES).

Methods

Six natural deep eutectic solvent systems were tested. Choline chloride was used as the hydrogen bond acceptor (HBA), and formic acid, ethylene glycol, lactic acid, urea, glycerol, and citric acid were used as hydrogen bond donors (HBD).

Results

Based on the results of single-factor experiments, response surface methodology using a Box-Behnken design was applied to determine the optimal conditions for UAE-DES. According to the results, the optimal NA extraction parameters were as follows: DES-1 consisted of choline chloride (HBA) and formic acid (HBD) in a mole ratio of 2:1, an extraction time of 10 min, an extraction temperature of 50°C, an ultrasonic amplitude of 75 W, and a solid-liquid ratio of 1/60 g/mL. Extracted NA was shown to inhibit the activity of different enzymes in vitro, including α-amylase, acetylcholinesterase, butyrylcholinesterase, tyrosinase, elastase, collagenase, and hyaluronidase.

Conclusion

Thus, the UAE-DES technique produced high-efficiency NA extraction while retaining bioactivity, implying broad application potential, and making it worthy of consideration as a high-throughput green extraction method.

Synthesis of a magnetic micro-eutectogel based on a deep eutectic solvent gel immobilized in calcium alginate: Application for green analysis of melamine in milk and dairy products

A new three-component magnetic eutectogel composed of a crosslinked copolymeric deep eutectic solvent (DES) and polyvinylpyrrolidone-coated Fe₃O₄ nano-powder impregnated in calcium alginate gel was synthesized and applied as a sorbent material in a green alternative micro solid-phase extraction of melamine in milk and dairy products. The analyses were performed using the HPLC-UV technique. The copolymeric DES was prepared through thermally-induced free-radical polymerization of [2-hydroxyethyl methacrylate]:[thymol] DES (1:1 mol ratio) as functional monomer, azobisisobutyronitrile (as initiator), and ethylene glycol dimethacrylate (as crosslinker). The sorbent was characterized using ATR-FTIR, ¹H & ¹³C FT-NMR, SEM, VSM, and BET techniques. The stability of the eutectogel in water and its effect on the pH of the aqueous solution was studied. A one-at-a-time approach was applied to optimize the impact of significant factors influencing sample preparation efficiency (sorbent mass, desorption conditions, adsorption time, pH, and ionic strength). The method validation was performed by evaluating matrix-matched calibration linearity (2-300 μg kg^-1, r² = 0.9902), precision, system suitability, specificity, enrichment factor, and matrix effect. The obtained limit of quantification (0.38 μg kg^-1) was lower than the established maximum level for melamine by Food and Drug Administration (FDA) (0.25 mg kg^-1), Food and Agriculture Organization (FAO) (0.5 & 2.5 mg kg^-1), and The European Union (EU) (2.5 mg kg^-1) in milk and dairy products. The optimized procedure was applied for the analysis of melamine in bovine milk, yogurt, cream, cheese, and ice cream. The obtained normalized recoveries of 77.4-105.3% (RSD% <7.0%) were acceptable regarding the practical default range set by the European Commission (70-120%, RSD≤20%). The sustainability and green aspects of the procedure were evaluated by the Analytical Greenness Metric Approach (0.6/1.0) and the Analytical Eco-Scale tool (73/100). This paper presents the first-time synthesis and application of this micro-eutectogel for the analysis of melamine in milk and milk-based dairy products.

Developing Transparent and Conductive PolyHEMA Gels Using Deep Eutectic Solvents

Poly(2-hydroxyethyl methacrylate) (polyHEMA) hydrogels are commonly used in biomaterials such as contact lenses. However, water evaporation from these hydrogels can cause discomfort to wearers, and the bulk polymerization method used to synthesize them often results in heterogeneous microstructures, reducing their optical properties and elasticity. In this study, we synthesized polyHEMA gels using a deep eutectic solvent (DES) instead of water and compared their properties to traditional hydrogels. Fourier-transform infrared spectroscopy (FTIR) showed that HEMA conversion in DES was faster than in water. DES gels also demonstrated higher transparency, toughness, and conductivity, along with lower dehydration, than hydrogels. The compressive and tensile modulus values of DES gels increased with HEMA concentration. A DES gel with 45% HEMA showed excellent compression-relaxation cycles and had the highest strain at break value in the tensile test. Our findings suggest that DES is a promising alternative to water for synthesizing contact lenses with improved optical and mechanical properties. Furthermore, DES gels' conduction properties may enable their application in biosensors. This study presents an innovative approach to synthesizing polyHEMA gels and provides insights into their potential applications in the biomaterials field.

Physical-chemical and ecotoxic evaluation of different deep eutectic solvents for green analytical applications

The search for new analytical methods is a latent reality in the so-called green analytical chemistry area, which aims at correlating analytical demands to environmental issues. Among the approaches used, it is possible to highlight green solvents as substitutes to the dangerous and conventional organic solvents as the most prominent alternative for this purpose. In the last few years, the amount of research focused on the usage of deep eutectic solvents (DESs) has been growing as an alternative to these issues. Thus, this work aimed to investigate the main physical-chemical and ecotoxical properties of seven different DESs. The results showed that DESs' evaluated properties are influenced by the chemical structure of their precursors, which may regulate DESs' viscosity, superficial tension, and antagonistic action against vegetable tissues and microbial cells. The constatations pointed here introduce a new perspective about the conscious usage of DESs on a green analytical point of view.

A Mild, Efficient and Sustainable Tetrahydropyranylation of Alcohols Promoted by Acidic Natural Deep Eutectic Solvents

A straightforward protocol to promote the tetrahydropyranylation of alcohols, using for the first time bioinspired acidic natural deep eutectic solvents (NADESs) as non-innocent reaction media under mild reaction conditions, was reported. This approach enables the preparation of several tetrahydropyranyl (THP) ethers starting from primary, secondary and tertiary alcohols in short reaction times and with high levels of chemoselectivity, working under air and without the need of additional catalyst. The sustainability of the methodology was further highlighted by its scalability and the easy recyclability of the NADES, allowing multigram preparations of THP ethers without any loss of the catalytic activity of the reaction media up to ten recycling steps. Telescoped, one-pot tetrahydropyranylation/nucleophilic acyl substitution transformations using the same eutectic mixture were also demonstrated.

Emerging Trends in Porogens toward Material Fabrication: Recent Progresses and Challenges

Fabrication of tailor-made materials requires meticulous planning, use of technical equipments, major components and suitable additives that influence the end application. Most of the processes of separation/transport/adsorption have environmental applications that demands a material to be with measurable porous nature, stability (mechanical, thermal) and morphology. Researchers say that a vital role is played by porogens in this regard. Porogens (i.e., synthetic, natural, mixed) and their qualitative and quantitative influence on the substrate material (polymers (bio, synthetic), ceramic, metals, etc.) and their fabrication processes are summarized. In most cases, porogens critically influence the morphology, performance, surface and cross-section, which are directly linked to material efficiency, stability, reusability potential and its applications. However, currently there are no review articles exclusively focused on the porogen pores' role in material fabrication in general. Accordingly, this article comprises a review of the literature on various types of porogens, their efficiency in different host materials (organic, inorganic, etc.), pore size distribution (macro, micro and nano), their advantages and limitations, to a certain extent, and their critical applications. These include separation, transport of pollutants, stability improvement and much more. The progress made and the remaining challenges in porogens' role in the material fabrication process need to be summarized for researcher's attention.

Betaine-Based Deep Eutectic Solvent as a New Media for Laccase-Catalyzed Template-Guided Polymerization/Copolymerization of Aniline and 3-Aminobenzoic Acid

Deep eutectic solvents (DESs) can compensate for some of the major drawbacks of traditional organic solvents and ionic liquids and meet all requirements of green chemistry. However, the potential of their use as a medium for biocatalytic reactions has not been adequately studied. In this work we used the DES betaine-glycerol with a molar ratio of 1:2 as co-solvent for enzymatic template-guided polymerization/copolymerization of aniline (ANI) and 3-aminobenzoic acid (3ABA). The laccase from the basidial fungus Trametes hirsuta and air oxygen served as catalyst and oxidant, respectively. Sodium polystyrene sulfonate (PSS) was used as template. Interpolyelectrolyte complexes of homopolymers polyaniline (PANI) and poly(3-aminobenzoic acid) (P3ABA) and copolymer poly(aniline-co-3-aminobenzoic acid) (P(ANI-3ABA)) were prepared and their physico-chemical properties were studied by UV-Vis and FTIR spectroscopy and cyclic voltammetry. According to the results obtained by atomic force microscopy, PANI/PSS had a granular shape, P(ANI-3ABA)/PSS had a spherical shape and P3ABA/PSS had a spindle-like shape. The copolymer showed a greater antimicrobial activity against Escherichia coli and Staphylcocus aureus as compared with the homopolymers. The minimal inhibitory concentration of the P(ANI-3ABA)/PSS against the gram-positive bacterium S. aureus was 0.125 mg mL⁻¹.

Novel Trends in Hydrogel Development for Biomedical Applications: A Review

Nowadays, there are still numerous challenges for well-known biomedical applications, such as tissue engineering (TE), wound healing and controlled drug delivery, which must be faced and solved. Hydrogels have been proposed as excellent candidates for these applications, as they have promising properties for the mentioned applications, including biocompatibility, biodegradability, great absorption capacity and tunable mechanical properties. However, depending on the material or the manufacturing method, the resulting hydrogel may not be up to the specific task for which it is designed, thus there are different approaches proposed to enhance hydrogel performance for the requirements of the application in question. The main purpose of this review article was to summarize the most recent trends of hydrogel technology, going through the most used polymeric materials and the most popular hydrogel synthesis methods in recent years, including different strategies of enhancing hydrogels’ properties, such as cross-linking and the manufacture of composite hydrogels. In addition, the secondary objective of this review was to briefly discuss other novel applications of hydrogels that have been proposed in the past few years which have drawn a lot of attention.

Deep Eutectic Solvents (DESs) as Green Extraction Media of Beneficial Bioactive Phytochemicals

Deep eutectic solvents (DES) are a mixture of two or more components and are classified as ionic solvents with special properties such as low volatility, high solubility, low melting points, low-cost materials and are less toxic to humans. Using DES has been suggested as an eco-friendly, green method for extraction of bioactive compounds from medicinal plants and are a safe alternative for nutritional, pharmaceutical and various sector applications. Conventional solvent extraction methods present drawbacks such as long extraction period, safety issues, harmful to the environment, costly and large volume of solvents required. The extraction method with DES leads to higher extraction yield and better bioactivity results as compared to the conventional solvents. This review provides a summary of research progress regarding the advantages of using DES to extract bioactive compounds such as phenolic acid, flavonoids, isoflavones, catechins, polysaccharides, curcuminoids, proanthocyanidin, phycocyanin, gingerols, ginsenosides, anthocyanin, xanthone, volatile monoterpenes, tannins, lignin, pectin, rutin, tert-butyl hydroquinone, chlorogenic acids, resveratrol and others, as opposed to using conventional solvents. The bioactivity of the extracts is determined using antioxidant, antibacterial and antitumor activities. Hence, DESs are considered potential green media with selective and efficient properties for extracting bioactive ingredients from medicinal plants.

Deep Eutectic Solvents and Multicomponent Reactions: Two Convergent Items to Green Chemistry Strategies

One of the highlights of green chemistry is the development of techniques and procedures with low environmental impact. In the last years, deep eutectic solvents (DES) have become an important alternative to conventional organic solvents. For a period ionic liquids have provoked remarkable interest, but they have been displaced by DES because they show easier preparation methods, lower prices, many of them are biodegradable and compatible with biological systems. In addition, they show adjustable physicochemical properties, high thermal stability, low volatility and are compatible with water. In this paper is reviewed the state of the art of the use of DES paying special attention to the role of reaction media in organic synthesis.

Reactive Deep Eutectic Solvents (RDESs): A New Tool for Phospholipase D-Catalyzed Preparation of Phospholipids

The use of Reactive Deep Eutectic Solvents (RDESs) in the preparation of polar head modified phospholipids (PLs) with phospholipase D (PLD)-catalyzed biotransformations has been investigated. Natural phosphatidylcholine (PC) has been submitted to PLD-catalyzed transphosphatidylations using a new reaction medium composed by a mixture of RDES/buffer. Instead of exploiting deep eutectic solvents conventionally, just as the reaction media, these solvents have been designed here in order to contribute actively to the synthetic processes by participating as reagents. RDESs were prepared using choline chloride or trimethyl glycine as hydrogen-bond acceptors and glycerol or ethylene glycol, as hydrogen-bond donors as well as nucleophiles for choline substitution. Specifically designed RDES/buffer reaction media allowed the obtainment of PLs with optimized yields in the perspective of a sustainable process implementation.

Promising Technological and Industrial Applications of Deep Eutectic Systems

Deep Eutectic Systems (DESs) are obtained by combining Hydrogen Bond Acceptors (HBAs) and Hydrogen Bond Donors (HBDs) in specific molar ratios. Since their first appearance in the literature in 2003, they have shown a wide range of applications, ranging from the selective extraction of biomass or metals to medicine, as well as from pollution control systems to catalytic active solvents and co-solvents. The very peculiar physical properties of DESs, such as the elevated density and viscosity, reduced conductivity, improved solvent ability and a peculiar optical behavior, can be exploited for engineering modular systems which cannot be obtained with other non-eutectic mixtures. In the present review, selected DESs research fields, as their use in materials synthesis, as solvents for volatile organic compounds, as ingredients in pharmaceutical formulations and as active solvents and cosolvents in organic synthesis, are reported and discussed in terms of application and future perspectives.

Quaternary type IV deep eutectic solvent-based tungsten oxide/niobium oxide photochromic and reverse fading composite complex

An excellent photochromic material based on a WO3/Nb2O5 complex with the fast fading property for promising application in optical glasses/lenses and color display devices.