Task-Specific Ionic Liquids with Lactate Anion Applied to Improve ZnO Dispersibility in the Ethylene-Propylene-Diene Elastomer

Surface Activated Pyrolytic Carbon Black: A Dual Functional Sustainable Filler for Natural Rubber Composites

The significant rise in end-of-life tires (ELTs) globally poses immediate environmental and human health risks. Therefore, to promote ELTs recycling and to reduce tire industry carbon emissions, herein we present a facile approach for fine-tuning the interfacial interactions between pyrolytic carbon black (P-CB) obtained from ELTs and natural rubber (NR) matrix using phosphonium-based ionic liquid (PIL). The reinforcing effect of PIL-activated P-CB was studied by replacing the furnace-grade carbon black (N330-CB) with varying PIL and P-CB loadings. Adding PIL improved the filler dispersion and the cross-linking kinetics with a substantially reduced zinc oxide (ZnO) loading. Considering the cross-linking and viscoelastic properties, it was concluded that the composite, P-CB/N330-CB-PIL (1.5)+ZnO (1) with half substitution of N330-CB with P-CB synergistically works with 1.5 phr PIL and 1 phr of ZnO resulting in improved dynamic-mechanical properties with a minimal loss tangent value at 60 °C (tanδ=0.0689) and improved glass transition temperature (Tg =-38 °C) compared to control composite. The significant drop (~29 % lower) in tanδ could reduce fuel consumption and related CO2 emissions. We envisage that this strategy opens an essential avenue for "Green Tire Technology" towards the substantial pollution abatement from ELTs and reduces the toxic ZnO.

Graphene Oxide Facilitates Transformation of Waste PET into MOF Nanorods in Ionic Liquids

Although though ionic liquids (IL) are rapidly emerging as highly efficient reagents for the depolymerization of waste plastics, their high cost and adverse impact on the environment make the overall process not only expensive but also environmentally harmful. In this manuscript, we report that graphene oxide (GO) facilitates the transformation of waste polyethylene terephthalate (PET) to Ni-MOF (metal organic framework) nanorods anchored on reduced graphene oxide (Ni-MOF@rGO) through NMP (N-Methyl-2-pyrrolidone)-based coordination in ionic liquids. Morphological studies using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) showed mesoporous three-dimensional structures of micrometer-long Ni-MOF nanorods anchored on reduced graphene substrates (Ni-MOF@rGO ), whereas structural studies using XRD and Raman spectra demonstrated the crystallinity of Ni-MOF nanorods. Chemical analysis of Ni-MOF@rGO carried out using X-ray photoelectron spectroscopy demonstrated that nickel moieties exist in an electroactive OH-Ni-OH state, which was further confirmed by nanoscale elemental maps recorded using energy-dispersive X-ray spectroscopy (EDS). The applicability of Ni-MOF@rGO as an electro-catalyst in a urea-enhanced water oxidation reaction (UOR) is reported. Furthermore, the ability of our newly developed NMP-based IL to grow MOF nanocubes on carbon nanotubes and MOF nano-islands on carbon fibers is also reported.

Phosphonium Ionic Liquid-Activated Sulfur Vulcanization: A Way Forward to Reduce Zinc Oxide Levels in Industrial Rubber Formulations

Extensive use of zinc oxide and accelerators such as diphenyl guanidine (DPG) in the vulcanization of rubber composites entail potential environmental risks. These are pervasive contaminants of roadway runoff originating from tire wear particles (TWPs). Herein, the effect of phosphonium ionic liquids (PILs) in styrene-butadiene rubber compounds was demonstrated with reduced ZnO loading and no DPG to minimize the environmental footprint of the vulcanization process. The structure and chemistry of PILs were found to be the influencing parameters impelling the cross-linking kinetics, enabling shorter induction times. The generation of active Zn²⁺ sites by PILs was examined through FTIR spectroscopy, calorimetry, and molecular dynamics simulations. From a tire application perspective, the PILs not only enhanced the cure kinetics but also improved the dynamic-mechanical behavior of the rubber composites. Consequently, the harm caused by TWPs to the atmosphere, fuel intake, and CO₂ emissions was minimal, thereby confirming the potential use of PILs in the tire industry.

Multifunctional Applications of Ionic Liquids in Polymer Materials: A Brief Review

As a new generation of green media and functional materials, ionic liquids (ILs) have been extensively investigated in scientific and industrial communities, which have found numerous ap-plications in polymeric materials. On the one hand, much of the research has determined that ILs can be applied to modify polymers which use nanofillers such as carbon black, silica, graphene oxide, multi-walled carbon nanotubes, etc., toward the fabrication of high-performance polymer composites. On the other hand, ILs were extensively reported to be utilized to fabricate polymeric materials with improved thermal stability, thermal and electrical conductivity, etc. Despite substantial progress in these areas, summary and discussion of state-of-the-art functionalities and underlying mechanisms of ILs are still inadequate. In this review, a comprehensive introduction of various fillers modified by ILs precedes a systematic summary of the multifunctional applications of ILs in polymeric materials, emphasizing the effect on vulcanization, thermal stability, electrical and thermal conductivity, selective permeability, electromagnetic shielding, piezoresistive sensitivity and electrochemical activity. Overall, this review in this area is intended to provide a fundamental understanding of ILs within a polymer context based on advantages and disadvantages, to help researchers expand ideas on the promising applications of ILs in polymer fabrication with enormous potential.

Potential Utilization of Ground Eggshells as a Biofiller for Natural Rubber Biocomposites

The aim of this work was application of ground eggshells in various amounts by weight as a biofiller for natural rubber (NR) biocomposites. Cetyltrimethylammonium bromide (CTAB), ionic liquids (ILs), i.e., 1-butyl-3-methylimidazolium chloride (BmiCl) and 1-decyl-3-methylimidazolium bromide (DmiBr), and silanes, i.e., (3-aminopropyl)-triethoxysilane (APTES) and bis [3-(triethoxysilyl)propyl] tetrasulfide (TESPTS), were used to increase the activity of ground eggshells in the elastomer matrix and to ameliorate the cure characteristics and properties of NR biocomposites. The influence of ground eggshells, CTAB, ILs, and silanes on the crosslink density, mechanical properties, and thermal stability of NR vulcanizates and their resistance to prolonged thermo-oxidation were explored. The amount of eggshells affected the curing characteristics and crosslink density of the rubber composites and therefore their tensile properties. Vulcanizates filled with eggshells demonstrated higher crosslink density than the unfilled sample by approximately 30%, whereas CTAB and ILs increased the crosslink density by 40-60% compared to the benchmark. Owing to the enhanced crosslink density and uniform dispersion of ground eggshells, vulcanizates containing CTAB and ILs exhibited tensile strength improved by approximately 20% compared to those without these additives. Moreover, the hardness of these vulcanizates was increased by 35-42%. Application of both the biofiller and the tested additives did not significantly affect the thermal stability of cured NR compared to the unfilled benchmark. Most importantly, the eggshell-filled vulcanizates showed improved resistance to thermo-oxidative aging compared to the unfilled NR.

The Potential Application of Starch and Walnut Shells as Biofillers for Natural Rubber (NR) Composites

The goal of this study was application of corn starch and ground walnut shells in various amounts by weight as biofillers of natural rubber (NR) biocomposites. Additionally, ionic liquid 1-butyl-3-methylimidazolium chloride (BmiCl) and (3-aminopropyl)-triethoxysilane (APTES) were used to increase the activity of biofillers and to improve the curing characteristics of NR composites. The effect of biofillers used and their modification with aminosilane or ionic liquid on the curing characteristics of NR composites and their functional properties, including crosslink density, mechanical properties in static and dynamic conditions, hardness, thermal stability and resistance to thermo-oxidative aging were investigated. Starch and ground walnut shells were classified as inactive fillers, which can be used alternatively to commercial inactive fillers, e.g., chalk. BmiCl and APTES were successfully used to support the vulcanization and to improve the dispersion of biofillers in NR elastomer matrix. Vulcanizates with starch, especially those containing APTES and BmiCl, exhibited improved tensile properties due to the higher crosslink density and homogenous dispersion of starch, which resulted from BmiCl addition. NR filled with ground walnut shells demonstrated improved resistance to thermo-oxidative aging. It resulted from lignin present in walnut shells, the components of which belong to polyphenols, that have an antioxidant activity.

Zinc Complexes with 1,3-Diketones as Activators for Sulfur Vulcanization of Styrene-Butadiene Elastomer Filled with Carbon Black

Zinc oxide nanoparticles (N-ZnO) and zinc complexes with 1,3-diketones of different structures were applied instead of microsized zinc oxide (M-ZnO) to activate the sulfur vulcanization of styrene-butadiene rubber (SBR). The influence of vulcanization activators on the cure characteristics of rubber compounds, as well as crosslink density and functional properties of SBR vulcanizates, such as tensile properties, hardness, damping behavior, thermal stability and resistance to thermo-oxidative aging was explored. Applying N-ZnO allowed to reduce the content of zinc by 40% compared to M-ZnO without detrimental influence on the cure characteristic and performance of SBR composites. The activity of zinc complexes in vulcanization seems to strongly depend on their structure, i.e., availability of zinc to react with curatives. The lower the steric hindrance of the substituents and thus the better the availability of zinc ions, the greater was the activity of the zinc complex and consequently the higher the crosslink density of the vulcanizates. Zinc complexes had no detrimental effect on the time and temperature of SBR vulcanization. Despite lower crosslink density, most vulcanizates with zinc complexes demonstrated similar or improved functional properties in comparison with SBR containing M-ZnO. Most importantly, zinc complexes allowed the content of zinc in SBR compounds to be reduced by approximately 90% compared to M-ZnO.