Design and Gas Separation Performance of Imidazolium Poly(ILs) Containing Multivalent Imidazolium Fillers and Crosslinking Agents

Multi-Walled Carbon Nanotubes Functionalized with Hydroxamic Acid Derivatives for the Removal of Lead from Wastewater: Kinetics, Isotherm, and Thermodynamic Studies

Hydroxamic acids are recognized chelators for various metals; however, using them as functional groups on carbon nanotubes (CNTs) is rare. In this study, novel multi-walled carbon nanotubes (MWCNTs) functionalized with hydroxamic acid derivatives were developed. The MWCNTs were first oxidized, and the resulting product, MWCNT-COOH (A), was treated with oxalyl chloride to yield MWCNT-COCl. The functionalized MWCNTs were susceptible to reacting with the hydroxylamine derivatives of type R–NHOH and produced MWCNTs functionalized with the following hydroxamic acid derivatives (MWCNT-HA): MWCNT-CONOHMe (B), MWCNT-CONOHCOMe(C), and MWCNT-CONOHPh (D). The synthesized derivatives were confirmed by various techniques such as scanning electron microscopy, X-ray photoelectron spectroscopy, and Raman spectroscopy. In order to examine their chelation ability, these materials were examined as possible new adsorbents for harmful Pb(II) particles. The adsorption efficiency of the functionalized MWCNT adsorbents toward Pb(II) was investigated. The effects of the adsorbent dose, temperature, pH, and time on adsorption efficiency were considered, and adsorption boundaries that resulted in enhanced effectiveness were obtained. The developed materials were found to have extraordinary coordination sites, such as amine, hydroxyl, and carboxyl groups, which served as excellent chelating specialists for the Pb(II) particles. Thermodynamic and kinetic investigations revealed the unconstrained nature of the adsorption of Pb(II) by the developed MWCNT adsorbents at room temperature. The adsorption was noted to follow the pseudo-second-order and Langmuir isotherm models.

A polyimide/poly(N-vinylimidazole) membrane for CO2/CH4 separation with high selectivity and permeability

Membranes with both good permeation and selectivity are highly desired for gas separations. In this study, we synthesized a new 6FDA-type polyimide copolymer 6FDA-BDTA-ODA, and then an organic polymer of poly ( N-vinylimidazole) was doped into the polyimide to prepare mixed matrix membranes (MMMs). We also studied the effect of poly ( N-vinylimidazole) contents on the separation performance of MMMs. The results showed that the ideal selectivity for CO2/CH4 was improved by adding the poly ( N-vinylimidazole) filler. The ideal selectivity reached 63.5 with 6 wt% poly ( N-vinylimidazole) loading with the permeability of 29.2 Barrer. The highly permeable MMMs showed a considerably enhanced performance for CO2/CH4 that close to the 2008 Robeson upper-bound. The gas separation performance of the prepared MMMs for CO2/CH4 was improved compared to that of the pure polymer membrane, indicating that the copolyimide/poly ( N-vinylimidazole) MMMs have promising applications in CO2/CH4 gas separation.

Enhancing Pervaporation Membrane Selectivity by Incorporating Star Macromolecules Modified with Ionic Liquid for Intensification of Lactic Acid Dehydration

Modification of polymer matrix by hybrid fillers is a promising way to produce membranes with excellent separation efficiency due to variations in membrane structure. High-performance membranes for the pervaporation dehydration were produced by modifying poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) to facilitate lactic acid purification. Ionic liquid (IL), heteroarm star macromolecules (HSM), and their combination (IL:HSM) were employed as additives to the polymer matrix. The composition and structure of hybrid membranes were characterized by X-ray diffraction and FTIR spectroscopy. Scanning electron microscopy was used to investigate the membranes surface and cross-section morphology. It was established that the inclusion of modifiers in the polymer matrix leads to the change of membrane structure. The influence of IL:HSM was also studied via sorption experiments and pervaporation of water‒lactic acid mixtures. Lactic acid is an essential compound in many industries, including food, pharmaceutical, chemical, while the recovering and purifying account for approximately 50% of its production cost. It was found that the membranes selectively remove water from the feed. Quantum mechanical calculations determine the favorable interactions between various membrane components and the liquid mixture. With IL:HSM addition, the separation factor and performance in lactic acid dehydration were improved compared with pure polymer membrane. The best performance was found for (HSM: IL)-PPO/UPM composite membrane, where the permeate flux and the separation factor of about 0.06 kg m⁻² h⁻¹ and 749, respectively, were obtained. The research results demonstrated that ionic liquids in combination with star macromolecules for membrane modification could be a promising approach for membrane design.