Molecular-Level Investigation of Cycloaliphatic Epoxidised Ionic Liquids as a New Generation of Monomers for Versatile Poly(Ionic Liquids)

Thermodynamics of Tri- and Tetraepoxyimidazolium NTf2 Amine Polyaddition: A Theoretical Perspective

The thermodynamics of newly designed tri- and tetraepoxyimidazolium NTf2 monomers reacting with several diamines used as curing agents to form epoxy/amine thermosets was studied. The ability of each epoxy/amine combination to induce cross-linking both through the substitution of multiple epoxy groups and through multiple additions to a single amine was investigated. Through an increased understanding of the thermodynamics of epoxy-amine polymerization in complex polyepoxy-ILs, it is possible to more thoroughly understand the factors affecting the reactivity in these complex systems. These calculations showed that while each possible epoxy-amine combination was exergonic to both forms of cross-linking, the degree to which both amines-induced cross-linking and epoxy-induced cross-linking was favored varied between epoxy-amine combinations. Thermodynamic results obtained using density functional theory were experimentally validated through differential scanning calorimetry results, wherein similar trends were noted between theory and experiment. Among the trends noted in amines-epoxy combinations tested, tetraepoxyimidazolium NTf2/PACM (i.e., a cycloaliphatic diamine) was found to be a prime candidate for amine cross-linking, with the addition of a second epoxy to a single amine group being notably the most negative of all epoxy-amine combinations at -77.6 kJ mol-1. While in the case of epoxy cross-linking, the aliphatic polyetheramine denoted Jeffamine-D230-containing systems were found to be the most exergonic, with additions of primary amines to triepoxyimidazolium and tetraepoxyimidazolium NTf2 averaging -86.9 kJ mol-1. Interaction energy analysis indicated that the aromatic amine named sulfanilamide is the most favorable to engage in reactions due to having the most negative interaction energies with already highly substituted epoxy monomers. These results can be used to adjust the cross-linking possibilities of tri- and tetraepoxyimidazolium NTf2/amine polymerization and give insight into the predominant cross-linking reactions in these unique systems.

Epoxidized Ionic Liquids as Processing Auxiliaries of Poly(Lactic Acid) Matrix: Influence on the Manufacture, Structural and Physical Properties

In this study, we set out to modify poly(lactic acid) (PLA) by incorporating epoxidized ionic liquids (ILs) that were specifically designed with imidazolium-NTf₂ moieties. First, we synthesized di-, tri- and tetra-epoxidized ILs, which were incorporated into a PLA matrix at 3, 5, and 10 wt% through a melt extrusion process. We investigated the relationship between the structure and properties of the resulting materials in terms of thermal, mechanical, rheological, and surface properties. The results showed the potential of ILs to impact these properties. Notably, the tri- and tetra-epoxidized ILs enhanced the thermal stability of the PLA matrix as well as the crystallinity while reducing the glass transition temperature and melting point, which is promising for reactive extrusion processing. Overall, this research opens new routes for using reactive ILs to improve the processing and properties of PLA polymers.

Theoretical Analysis of Physical and Chemical CO2 Absorption by Tri- and Tetraepoxidized Imidazolium Ionic Liquids

The efficient capture of CO₂ from flue gas or directly from the atmosphere is a key subject to mitigate global warming, with several chemical and physical absorption methods previously reported. Through polarizable molecular dynamics (MD) simulations and high-level quantum chemical (QC) calculations, the physical and chemical absorption of CO₂ by ionic liquids based on imidazolium cations bearing oxirane groups was investigated. The ability of the imidazolium group to absorb CO₂ was found to be prevalent in both the tri- and tetraepoxidized imidazolium ionic liquids (ILs) with coordination numbers over 2 for CO₂ within the first solvation shell in both systems. Thermodynamic analysis of the addition of CO₂ to convert epoxy groups to cyclic carbonates also indicated that the overall reaction is exergonic for all systems tested, allowing for chemical absorption of CO₂ to also be favored. The rate-determining step of the chemical absorption involved the initial opening of the epoxy ring through addition of the chloride anion and was seen to vary greatly between the epoxy groups tested. Among the groups tested, the less sterically hindered monoepoxy side of the triepoxidized imidazolium was shown to be uniquely capable of undergoing intramolecular hydrogen bonding and thus lowering the barrier required for the intermediate structure to form during the reaction. Overall, this theoretical investigation highlights the potential for epoxidized imidazolium chloride ionic liquids for simultaneous chemical and physical absorption of CO₂.

A Computer Simulation Study of Thermal and Mechanical Properties of Poly(Ionic Liquid)s

Thermal and mechanical properties of poly(ionic liquid)s (PILs), an epoxidized ionic liquid-amine network, are studied via molecular dynamics simulations. The poly(ionic liquid)s are designed with two different ionic liquid monomers, 3-[2-(Oxiran-2-yl)ethyl]-1-{4-[(2-oxiran-2-yl)ethoxy]phenyl}imidazolium (EIM2) and 1-{4-[2-(Oxiran-2-yl)ethyl]phenyl}-3-{4-[2-(oxiran-2-yl)ethoxy]benzyl}imidazolium (EIM1), each of which is networked with tris(2-aminoethyl)amine, paired with different anions, bis(trifluoromethanesulfonyl)imide (TFSI⁻) and chloride (Cl⁻). We investigate how ionic liquid monomers with high ionic strength affect structures of the cross-linked polymer networks and their thermomechanical properties such as glass transition temperature (T_g) and elastic moduli, varying the degree of cross-linking. Strong electrostatic interactions between the cationic polymer backbone and anions build up their strong structures of which the strength depends on their molecular structures and anion size. As the anion size decreases from TFSI⁻ to Cl⁻, both T_g and elastic moduli of the PIL increase due to stronger electrostatic interactions present between their ionic moieties, making it favorable for the PIL to organize with stronger bindings. Compared to the EIM2 monomer, the EIM1 monomers and TFSI⁻ ions generate a PIL with higher T_g and elastic moduli. This attributes to the less flexible structure of the EIM1 monomer for the chain rotation, in which steric hindrance by ring moieties in the EIM1-based PIL enhances their structural rigidity. The π-π stacking structures between the rings are found to increase in EIM1-based PIL compared to the EIM2-based one, which becomes stronger with smaller Cl⁻ ion rather than TFSI⁻. The effect of the degree of the cross-linking on thermal and mechanical properties is also examined. As the degree of cross-linking decreases from 100% to 60%, T_g also decreases by a factor of 10–20%, where the difference among the given PILs becomes decreased with a lower degree of cross-linking. Both the Young’s (E) and shear (G) moduli of all the PILs decrease with degree of cross-linking, which the reduction is more significant for the PIL generated with EIM2 monomers. Transport properties of anions in PILs are also studied. Anions are almost immobilized globally with very small structural fluctuations, in which Cl⁻ presents lower diffusivity by a factor of ~2 compared to TFSI⁻ due to their stronger binding to the cationic polymer backbone.

Cross-Linking and Evaluation of the Thermo-Mechanical Behavior of Epoxy Based Poly(ionic Liquid) Thermosets

Poly(ionic liquids) (PILs) and ionenes are polymers containing ionic groups in their repeating units. The unique properties of these polymers render them as interesting candidates for a variety of applications, such as gas separation membranes and polyelectrolytes. Due to the vast number of possible structures, numerous synthesis protocols to produce monomers with different functional groups for task-specific PILs are reported in literature. A difunctional epoxy-IL resin was synthesized and cured with multifunctional amine and anhydride hardeners and the thermal and thermomechanical properties of the networks were assessed via differential scanning calorimetry and dynamic mechanical analysis. By the selection of suitable hardeners, the glass transition onset temperature (Tg,onset) of the resulting networks was varied between 18 °C and 99 °C. Copolymerization of epoxy-IL with diglycidyl ether of bisphenol A (DGEBA) led to a further increase of the Tg,onset. The results demonstrate the potential of epoxy chemistry for tailorable PIL networks, where the hardener takes the place of the ligands without requiring an additional synthesis step and can be chosen from a broad range of commercially available compounds.