Synthesis of Urea-Formaldehyde Microcapsule Containing Fluororesin and Its Effect on Performances of Waterborne Coatings on Wood Surface

Improving the decorative performance of UV-curable coatings with iridescent cellulose nanocrystal film

Cellulose nanocrystals (CNC) possess remarkable mechanical properties, a high aspect ratio, a large specific surface area, and a unique nanostructure, making them a popular choice in various fields. In this study, a CNC suspension was prepared through acid hydrolysis, and subsequently, a film exhibiting iridescence and chiral nematic structure was formed on the cured UV-WA surface via evaporation-induced self-assembly. The mean diameter and length of CNC were determined to be 25.1-33.3 nm and 281.3-404.2 nm, respectively, through transmission electron microscope analysis. The experimental results revealed that the color of the film significantly changes with variations in the CNC suspension concentration. Notably, the formation of the iridescent film is dependent on the concentration of CNC, with concentrations between 1.2% and 2.9% being optimal, and the aspect ratio of the CNC nanoparticles being around 11.3. X-ray diffraction analysis confirmed that the CNC nanoparticles possess the same crystal structure as microcrystalline cellulose (cellulose I). Fourier transform infrared spectroscopy revealed that the C[double bond, length as m-dash]C bond present in the liquid UV-curable coating disappeared upon UV irradiation. The performance of the CNC iridescent film, with varying thickness, was evaluated using UV-vis spectroscopy. The thermogravimetric analysis results indicate that the addition of CNC enhances the membrane's thermal stability and heat resistance. The results indicate that as the thickness of the CNC iridescent film increases, the corresponding UV-vis spectra display a redshift. The UV-WA/CNC shows potential in the field of decoration and establishing a straightforward, cost-effective, and efficient method for producing photonic materials with structural colors.

Effect of Sandpaper Meshes on the Performance of Tilia Sp. Self-Repairing Coatings

This study aimed to investigate the impact of different sandpaper sanding meshes on the mechanical and optical properties of microencapsulated Tilia sp. film. An orthogonal experiment revealed that sanding between primers had the most significant effect. Furthermore, an independent experiment implied that increasing the mesh size resulted in decreased surface roughness and decreased color difference, elongation at break, and gloss after liquid resistance. In the aging test, the color difference of the paint film increased with the aging time, and the gloss tended to stabilize. Additionally, the anti-aging gloss of 240 mesh sandpaper used between primers remained relatively stable. The paint film sanded with 240 mesh sandpaper between primers displayed small and regular cracks after temperature and UV aging. Overall, the paint film demonstrated good comprehensive performance when sanded with 240 mesh between primers, 240 mesh between primer/topcoat, and 1000 mesh for topcoat. Self-repairing microcapsules showed better repair efficacy on the coating. This study provides a technical reference for the development of self-repairing coatings.

Preparation of Aloe-Emodin Microcapsules and Its Effect on Antibacterial and Optical Properties of Water-Based Coating

With the development of science and technology, the function of waterborne coatings has been advanced to a higher standard, which requires researchers to innovate and expand the research on them. Aloe-emodin is a natural material with antibacterial properties. Applying its antibacterial effect to the coating can enrich its function and meet the diversified needs of consumers. In this study, the urea-formaldehyde resin was used as the wall material and the aloe-emodin as the core material to prepare the microcapsules. The coating rate, yield, and morphology of the microcapsules were characterized. Through an orthogonal experiment and a single factor experiment, the optimization scheme of microcapsule preparation was explored. The results indicated that the optimum preparation process of aloe-emodin microcapsules was as follows: the mass ratio of core material to wall material was 1:15, the molar ratio of urea to formaldehyde was 1:1.2, the temperature of microencapsulation was 50 °C, and the stirring speed of microencapsulation was 600 rpm. On this basis, the aloe-emodin microcapsules with 0%, 1.0%, 3.0%, 6.0%, 9.0%, and 12.0% contents were added to the waterborne coating to prepare the paint films, and their influence on the antibacterial and optical properties of the waterborne paint films was explored. The results demonstrated that the aloe-emodin microcapsules had antibacterial activity. When the content was 6.0%, the comprehensive performance of the film was better. The antibacterial rate of the film against Escherichia coli was 68.1%, and against Staphylococcus aureus it was 60.7%. The color difference of the film was 59.93, and the glossiness at 60° was 7.8%. In this study, the microcapsules that can improve the antibacterial performance of water-based coatings were prepared, which can expand the application of water-based coatings and provide a reference for the study of the functionalization of water-based coatings.

UV-curable self-matting waterborne polyurethane acrylate coating via self-wrinkled surface during curing in open-air

This study developed and evaluated a series of ultraviolet (UV) curable self-matting waterborne polyurethane acrylate (UV-WPUA) coatings based on the self-wrinkled surface during UV-curing in the open-air. This method is simple, efficient, eco-friendly, and it does not require complicated or expensive equipment. The FT-IR spectrum indicates that the peaks of C[double bond, length as m-dash]C in UV-WPUA have disappeared after UV irradiation. The gloss value of the UV-WPUA cured film can be affected by the wrinkles on the surface of the film and adjusted it by controlling the content of the photoinitiator in the liquid coating, since the content influences the dimensions of the wrinkles. As the height of the wrinkle increased, the gloss value of the UV-WPUA cured film decreased, and when the incident angles are 20° and 60°, the gloss values are less than 3 GU and 5 GU, respectively. Moreover, the cured film has a maximum water contact angle of 109°, which is affected by wrinkles and positively correlated with the surface roughness of the film. Furthermore, the cured film has excellent properties of thermal stability, tensile strength, pencil hardness, cross-cut adhesion and resistance to abrasion properties, making it well suited for the furniture, leather, and textile applications.

Investigating the Emission of Hazardous Chemical Substances from Mashrabiya Used for Indoor Air Quality in Hot Desert Climate

Dubai has the reputation of a continuously growing city, with skyscrapers and mega residential projects. Many new residential projects with poor choices of material and ventilation have led to a faster rise in sick building syndrome (SBS) in Dubai than in any other country, and the IAQ (indoor air quality) has become more critical. Volatile organic compounds (VOCs) and formaldehyde (HCHO) affect the health of residents, producing the phenomenon known as SBS (sick building syndrome). It has been reported that wood materials used for furniture and wooden windows and doors are a significant source of indoor air pollution in new houses. This paper aims to identify the factor elements emitting harmful chemical substances, such as VOCs and HCHO, from wooden mashrabiya (traditional Arabic window) by examining the characteristics of the raw and surface materials through test pieces. As a methodology, a small chamber system was used to test the amount of hazardous chemicals generated for each test piece. For Total volatile organic compounds (TVOC) and HCHO, the blank concentration before the injection and the generation after seven days were measured. The results showed that to reduce TVOC, it is necessary to secure six months or more as a retention period for raw materials and surface materials. The longer the retention period, the smaller the TVOC emission amount. In the case of mashrabiya, an HCHO low-emitting adhesive and maintenance for one month or more are essential influencing factors. It was proven that using raw materials with a three-month or more retention period and surface materials with a one-month or more retention period is safe for indoor mashrabiya. This study is the first study in the Middle East to identify factors and characteristics that affect the emission of hazardous chemicals from wood composite materials, such as wood mashrabiya, that affect indoor air quality in residential projects in Dubai. It analyzes the correlation between emission levels and the retention period of raw and surface materials, in order to provide a new standard for indoor air pollutants.

Influence of the Bottom Color Modification and Material Color Modification Process on the Performance of Modified Poplar

According to the old surface coating process of European and American furniture, the surface of modified poplar is first differentiated pre-treatment, and then the bottom color modification and material color modification are respectively applied to the modified poplar after the surface differentiation treatment. The visual physical quantity and physical and chemical properties were measured and compared with mahogany, which is commonly used in old furniture in Europe and America to explore the effect of colorants and coloring steps, as well as different surface pretreatments on the coloring effect. Finally, it is concluded that continuous coloring operations can narrow the difference in brightness and red color value in the coloring layer of modified poplar and mahogany. Continuous coloring operations increase the difference between the yellow-green color values of modified poplar and mahogany. Therefore, the coloring difference between modified poplar and mahogany was affected by the colorant and coloring steps. Through color accumulation, the gap between the two in the target color coloring effect can be reduced, thereby reducing the difference between the coloring effect of modified poplar and mahogany.