Surface Finishing of FDM-Fabricated Amorphous Polyetheretherketone and Its Carbon-Fiber-Reinforced Composite by Dry Milling

Surface Treatment of Additively Manufactured Polyetheretherketone (PEEK) by Centrifugal Disc Finishing Process: Identification of the Key Parameters

Polyetheretherketone is a promising material for implants due to its good mechanical properties and excellent biocompatibility. Its accessibility to a wide range of applications is facilitated by the ability to process it with an easy-to-use manufacturing process such as fused filament fabrication. The elimination of disadvantages associated with the manufacturing process, such as a poor surface quality, is a main challenge to deal with. As part of the mass finishing process, centrifugal disc finishing has demonstrated good results in surface optimization, making it a promising candidate for the post-processing of additively manufactured parts. The objective of this study is to identify the key parameters of the centrifugal disc finishing process on the waviness of additively manufactured PEEK specimens, which has not been investigated previously. The waviness of the specimen was investigated by means of confocal laser scanning microscopy (CLSM), while weight loss was additionally tracked. Six parameters were investigated: type, amount and speed of media, use of compound, amount of water and time. Type of media, time and speed were found to significantly influence waviness reduction and weight loss. Surface electron microscopy images demonstrated the additional effects of deburring and corner rounding. Results on previous studies with specimens made of metal showed similar results. Further investigation is required to optimize waviness reduction and polish parts in a second post-processing step.

Green Manufacturing-Oriented Polyetheretherketone Additive Manufacturing and Dry Milling Post-Processing Process Research

The application of polyetheretherketone (PEEK) in additive manufacturing (AM) can effectively reduce material and energy waste in the manufacturing process and help achieve lightweight parts. As a result, AM PEEK is considered an emerging technology in line with green manufacturing concepts. However, 3D-printed PEEK parts often suffer from low mechanical strength and poor surface quality due to the immaturity of the manufacturing process. Therefore, this research investigates the feasibility of improving the surface quality of 3D-printed parts by dry milling post-processing. Meanwhile, the mechanical strength of the parts is improved by optimizing the printing process parameters, and the effects of mechanical strength on milling quality are investigated. The novelty of this research is to design experiments based on the anisotropy of 3D-printed parts. For the first time, the delamination of the milling post-processing surface of 3D-printed PEEK parts is investigated. The results show that the milled surfaces of 3D-printed PEEK parts are prone to delamination problems. The printing direction has a significant effect on the quality of milling post-processing, whereas the milling directions have little effect on milling post-processing quality. The delamination problem can be significantly improved by a side milling process where the specimen is printed at 90° and then milled. Milling surface delamination is caused by the poor mechanical strength (internal bonding) of 3D-printed PEEK parts. By improving the mechanical strength of 3D-printed PEEK parts, the delamination of its milled surfaces can be significantly improved.

Mechanical Properties of Fused Deposition Modeling of Polyetheretherketone (PEEK) and Interest for Dental Restorations: A Systematic Review

The aim of this systematic review was to determine the optimal printing parameters for the producing of fused deposition modeling (FDM) 3D-printed polyetheretherketone (PEEK) elements with mechanical properties suitable for dental restorations. Indeed, the mechanical properties are a critical prerequisite for the study of other parameters, such as physical, aesthetic and biological properties. An exhaustive electronic search was carried out in the PubMed, Embase and Web of knowledge databases to gather all the studies evaluating the influence of the printing parameters on the obtained mechanical properties of FDM 3D-printed PEEK elements were selected. Initially, the search resulted in 614 eligible papers. Independent screenings of the abstracts were performed by two authors to identify the articles related to the question. Twenty-nine studies were selected, of which eleven were further excluded after reading of the full text, and finally, eighteen articles were included in this review. The studies were difficult to compare due to the variability of the printing parameters and the types of PEEK. However, it seems interesting to use a high infill rate, a high chamber temperature close to that of the printing temperature and a heat post-treatment to obtain 3D PEEK elements presenting properties adapted to use as dental restorations. The analysis of the available literature suggested that the properties of PEEK could make it an interesting material in dental restorations to be performed with FDM additive manufacturing.

An Investigation on the Hardness of Polylactic Acid Parts Fabricated via Fused Deposition Modeling

This paper investigated the hardness property of the fused deposition modeling (FDM)-printed PLA samples via different process parameters of printing and raster angles. The hardness data were sampled from the flat and edge surfaces of the samples. In addition, the effect of hardness characters after the ultraviolet (UV) curing process was analyzed. Furthermore, this research found that the printing and raster angles significantly affected the hardness value of the PLA part, which slightly increased after the UV irradiation. Moreover, the results of this study will provide a reference for the field of FDM application.

PEEK Biomaterial in Long-Term Provisional Implant Restorations: A Review

Polyetheretherketone (PEEK) has become a useful polymeric biomaterial due to its superior properties and has been increasingly used in dentistry, especially in prosthetic dentistry and dental implantology. Promising applications of PEEK in dentistry are dental implants, temporary abutment, implant-supported provisional crowns, fixed prosthesis, removable denture framework, and finger prosthesis. PEEK as a long-term provisional implant restoration has not been studied much. Hence, this review article aims to review PEEK as a long-term provisional implant restoration for applications focusing on implant dentistry. Articles published in English on PEEK biomaterial for long-term provisional implant restoration were searched in Google Scholar, ScienceDirect, PubMed/MEDLINE, and Scopus. Then, relevant articles were selected and included in this literature review. PEEK presents suitable properties for various implant components in implant dentistry, including temporary and long-term provisional restorations. The modifications of PEEK result in wider applications in clinical dentistry. The PEEK reinforced by 30-50% carbon fibers can be a suitable material for the various implant components in dentistry.

Applications of 3D-Printed PEEK via Fused Filament Fabrication: A Systematic Review

Polyether ether ketone (PEEK) is an organic polymer that has excellent mechanical, chemical properties and can be additively manufactured (3D-printed) with ease. The use of 3D-printed PEEK has been growing in many fields. This article systematically reviews the current status of 3D-printed PEEK that has been used in various areas, including medical, chemical, aerospace, and electronics. A search of the use of 3D-printed PEEK articles published until September 2021 in various fields was performed using various databases. After reviewing the articles, and those which matched the inclusion criteria set for this systematic review, we found that the printing of PEEK is mainly performed by fused filament fabrication (FFF) or fused deposition modeling (FDM) printers. Based on the results of this systematic review, it was concluded that PEEK is a versatile material, and 3D-printed PEEK is finding applications in numerous industries. However, most of the applications are still in the research phase. Still, given how the research on PEEK is progressing and its additive manufacturing, it will soon be commercialized for many applications in numerous industries.