Thermal and Dielectric Properties of Cyanate Ester Cured Main Chain Rigid-Rod Epoxy Resin

Density Functional Theory Study of Adhesion Mechanism between Epoxy Resins Cured with 4,4'-Diaminodiphenyl Sulfone and 4,4'-Diaminodiphenylmethane and Carboxyl Functionalized Carbon Fiber

The molecular mechanism of adhesion of two epoxy resins based on diglycidylether of bisphenol A (DGEBA) cured with 4,4'-diaminodiphenyl sulfone (DDS) and 4,4'-diaminodiphenylmethane (DDM) to the carbon fiber (CF) surface is investigated by employing density functional theory (DFT) calculations. The CF surface was modeled by the armchair-edge structure of graphite functionalized with carboxyl (COOH) groups. Two adhesion interfaces were constructed using the CF surface: one with the DGEBA-DDS molecule (CF/DGEBA-DDS interface) and the other with the DGEBA-DDM molecule (CF/DGEBA-DDM interface). The interfacial properties were analyzed by calculating the maximum adhesion stress (Smax) at the interface. The adhesion stress-displacement curve revealed that Smax is 1160.37 MPa, higher for the CF/DGEBA-DDS interface compared to the CF/DGEBA-DDM interface, which is 1060.48 MPa. The energy decomposition analysis showed a similar DFT contribution to adhesion stress for both interfaces, but the dispersion contribution is more significant at the CF/DGEBA-DDS interface. The crystal orbital Hamilton population (COHP) analysis revealed distinct interfacial interactions despite similar DFT contributions. Hydrogen bonding (H-bonding) between the functional groups at both interfaces including feeble OH-π interactions between the benzene rings of epoxy resins and COOH groups on the CF surface were observed. The orbital interaction energies calculated from integrated COHP, i.e., IpCOHP, revealed that the CF/DGEBA-DDS interface has six H-bonding interactions with large absolute IpCOHP values (>1 eV), whereas the CF/DGEBA-DDM interface has five. The interaction between the amine group of the DGEBA-DDM molecule and the CF surface has a large IpCOHP value among all interactions. The sulfone group being at the center of the DDS molecule and its strong surface interaction positioned the DGEBA-DDS molecule closer to the CF surface than the DGEBA-DDM molecule, enhancing dispersion interaction at the CF/DGEBA-DDS interface. Hence, the CF surface exhibits a stronger affinity toward the DGEBA-DDS molecule than the DGEBA-DDM molecule through dispersion interaction.

High-strength and machinable load-bearing integrated electrochemical capacitors based on polymeric solid electrolyte

Load bearing/energy storage integrated devices (LEIDs) allow using structural parts to store energy, and thus become a promising solution to boost the overall energy density of mobile energy storage systems, such as electric cars and drones. Herein, with a new high-strength solid electrolyte, we prepare a practical high-performance load-bearing/energy storage integrated electrochemical capacitors with excellent mechanical strength (flexural modulus: 18.1 GPa, flexural strength: 160.0 MPa) and high energy storage ability (specific capacitance: 32.4 mF cm^-2, energy density: 0.13 Wh m^-2, maximum power density: 1.3 W m^-2). We design and compare two basic types of multilayered structures for LEID, which significantly enhance the practical bearing ability and working flexibility of the device. Besides, we also demonstrate the excellent processability of the LEID, by forming them into curved shapes, and secondarily machining and assembling them into complex structures without affecting their energy storage ability.

Phase Equilibria, Diffusion and Structure in the Epoxypolycaprolactone System

Currently, there is no quantitative approach for the phase structure of cured thermoplastic systems modified with thermoplastic predicting. To solve this problem, we carried out the first stage of the study on a model polycaprolactone-epoxy oligomer (PCL-DGEBA) system. Using differential scanning calorimetry (DSC), refractometry and optical interferometry, a phase diagram for PCL-DGEBA mixtures was constructed, and the Flory-Huggins interaction parameters of PCL-DGEBA mixtures were calculated. The structure of PCL-DGEBA mixtures with different PCL content was analyzed by optical microscopy. The change in the structure formation mechanism with increasing PCL concentration was shown. The diffusion coefficients are calculated by the Motano-Boltzmann method. The values of the apparent activation energy of the viscous flow PCL and of self-diffusion of DGEBA are determined. The obtained data will be used for the in situ curing kinetics and phase equilibria in the diffusion zone investigations in order to develop a quantitative method for predicting the phase structure of cured systems.