LDPE/Bismuth Oxide Nanocomposite: Preparation, Characterization and Application in X-ray Shielding

Fabrication, Structural Characterization, and Photon Attenuation Efficiency Investigation of Polymer-Based Composites

Experiments have assessed various polymer composites for radiation shielding in diverse applications. These composites are lighter and non-toxic when compared to lead (Pb), making them particularly effective in diagnostic imaging for shielding against low-energy photons. This study demonstrates the fabrication of four composites by combining a base material, specifically a high-density polyethylene (HDPE) polymer, with 10% and 20% silicon (Si) and silicon carbide (SiC), respectively. Additionally, 5% molybdenum (Mo) was incorporated into the composites as a heavy metal element. The composites obtained were fabricated into 20 disks with a uniform thickness of 2 mm each. Discs were exposed to radiation from a low-energy X-ray source (32.5-64.5 keV). The chemical and physical properties of composites were assessed. The shielding ability of samples was evaluated by determining the linear and mass attenuation coefficients (μ and μm), radiation protection efficiency (RPE), half-value layer (HVL), and mean free path (MFP). According to our findings, supplementing HDPE with additives improved the attenuation of beams. The μm values showed that composite X-ray shielding characteristics were enhanced with filler concentration for both Si and SiC. Polymer composites with micro-molecule fillers shelter X-rays better than polymers, especially at low energy. The HVL and MFB values of the filler are lower than those of the pure HDPE sample, indicating that less thickness is needed to shield at the appropriate energy. HC-20 blocked 92% of the incident beam at 32.5 keV. This study found that increasing the composite sample thickness or polymer filler percentage could shield against low-energy radiation.

Novel Polymer Composites for Lead-Free Shielding Applications

Polymer nanocomposites have recently been introduced as lead-free shielding materials for use in medical and industrial applications. In this work, novel shielding materials were developed using low-density polyethylene (LDPE) mixed with four different filler materials. These four materials are cement, cement with iron oxide, cement with aluminum oxide, and cement with bismuth oxide. Different weight percentages were used including 5%, 15%, and 50% of the cement filler with LDPE. Furthermore, different weight percentages of different combinations of the filler materials were used including 2.5%, 7.5%, and 25% (i.e., cement and iron oxide, cement and aluminum oxide, cement and bismuth oxide) with LDPE. Bismuth oxide was a nanocomposite, and the remaining oxides were micro-composites. Characterization included structural properties, physical features, mechanical and thermal properties, and radiation shielding efficiency for the prepared composites. The results show that a clear improvement in the shielding efficiency was observed when the filler materials were added to the LDPE. The best result out of all these composites was obtained for the composites of bismuth oxide (25 wt.%) cement (25 wt.%) and LDPE (50 wt.%) which have the lowest measured mean free path (MFP) compared with pure LDPE. The comparison shows that the average MFP obtained from the experiments for all the eight energies used in this work was six times lower than the one for pure LDPE, reaching up to twelve times lower for 60 keV energy. The best result among all developed composites was observed for the ones with bismuth oxide at the highest weight percent 25%, which can block up to 78% of an X-ray.

A new method in the production of protective sheets against X-ray radiation

Today, the use of X-rays in diagnosing and sometimes treating patients is inevitable. Despite the many benefits of using X-rays in medical and other sciences, the harmful effects of this radiation on human tissue should not be neglected. One of the best ways to prevent the harmful effects of X-rays on the human body is to use appropriate covers against these rays. It seems that it is necessary to find effective particles to weaken X-rays and choose a suitable substrate with high mechanical resistance to scatter particles in it. In this study, the synthesis of SnO2 nanoparticles from SnCl2.2H2O precursor and BaSO4 nanoparticles from BaCl2.2H2O precursor using neem tree extract (Azadirachta indica) as a reducing and stabilizing agent is reported. After the synthesis of nanoparticles, their structure was investigated by X-ray diffraction, scanning electron microscopy and energy dispersive X-ray analysis. Then the desired composite and nanocomposite were prepared in the polymer substrate. The sheets were prepared using an extruder and then a hot hydraulic press. The output sheets had a thickness of 1 mm. The structural characteristics of the produced sheets such as surface morphology, density of prepared composites, mechanical properties, thermal gravimetric analysis and retention of loaded particles after three times washes were investigated. The X-ray attenuation capability of each sample was evaluated by calculating the linear attenuation coefficient for each prepared sample. The results show that all sheets filled with tin and barium micro and nano particles have more X-ray attenuation capabilities than pure polymer. Among the prepared sheets, the nanocomposite prepared from low-density polyethylene (77 %) + SnO2 (10 %) + BaSO4 (10 %) + multi-walled carbon nanotubes (3 %) showed the highest X-ray attenuation.

Study of Prepared Lead-Free Polymer Nanocomposites for X- and Gamma-ray Shielding in Healthcare Applications

Polymer composites were synthesized via melt mixing for radiation shielding in the healthcare sector. A polymethyl-methacrylate (PMMA) matrix was filled with Bi₂O₃ nanoparticles at 10%, 20%, 30%, and 40% weight percentages. The characterization of nanocomposites included their morphological, structural, and thermal properties, achieved using SEM, XRD, and TGA, respectively. The shielding properties for all synthesized samples including pristine PMMA were measured with gamma spectrometry using a NaI (Tl) scintillator detector spanning a wide range of energies and using different radioisotopes, namely Am-241 (59.6 keV), Co-57 (122.2 keV), Ra-226 (242.0), Ba-133 (80.99 and 356.02 keV), Cs-137 (661.6 keV), and Co-60 (1173.2 and 1332.5 keV). A substantial increase in the mass attenuation coefficients was obtained at low and medium energies as the filler weight percentage increased, with minor variations at higher gamma energies (1173 and 1332 keV). The mass attenuation coefficient decreased with increasing energy except under 122 keV gamma rays due to the K-absorption edge of bismuth (90.5 keV). At 40% loading of Bi₂O_3, the mass attenuation coefficient for the cesium ¹³⁷Cs gamma line at 662 keV reached the corresponding value for the toxic heavy element lead. The synthesized PMMA-Bi₂O₃ nanocomposites proved to be highly effective, lead-free, safe, and lightweight shielding materials for X- and gamma rays within a wide energy range (<59 keV to 1332 keV), making them of interest for healthcare applications.

Flexible stretchable low-energy X-ray (30-80 keV) radiation shielding material: Low-melting-point Ga1In1Sn7Bi1 alloy/thermoplastic polyurethane composite

A highly flexible stretchable thermoplastic polyurethane (TPU) composite loaded with a low-melting-point Ga₁In₁Sn₇Bi₁ multiprincipal element alloy (LMPEA) was prepared, and its radiation shielding performance was evaluated. The fluid characteristic of LMPEA and the flexibility of TPU enable good interface compatibility. Ga₁In₁Sn₇Bi₁ LMPEA consists of two eutectic structures, and the liquid gallium-rich phases are distributed at the boundary of the InBi intermetallic compound and Sn solid solution. In the low-photon energy range of 30-80 keV, LMPEA has a theoretical specific lead equivalent of 0.803 mmPb/mm and a theoretical weight reduction of 17.27% compared with lead. To evaluate the photon attenuation capability for the LMPEA/TPU composites, the Phy-X procedure and Monte Carlo simulations were used to determine the shielding parameters, such as the mass attenuation coefficient, linear attenuation coefficient, half-value layer, tenth-value layer, mean free path, effective atomic number, and fast neutron removal cross section. The attenuation performance test of X-ray protective materials measured the actual lead equivalent. At the same thickness, the LMPEA/TPU composite (66.667, 50.000 wt% LMPEA loading) has a higher measured lead equivalent than the in-service medical shielding materials, which meets the lead equivalent requirements of X-ray protective clothing. LMPEA/TPU composites are nontoxic, lightweight, and have excellent low-energy X-ray shielding ability, offering great potential for application in medical wearable materials.

Comparison of Shielding Material Dispersion Characteristics and Shielding Efficiency for Manufacturing Medical X-ray Shielding Barriers

During medical diagnoses, X-ray shielding barriers are used to protect against direct and indirect X-rays. Currently, lead is used as the primary material for shielding barriers; however, the demand for eco-friendly shielding barriers has been increasing. Conventionally, shielding barriers are manufactured using a mechanically bonded combination of lead and aluminum; however, in this study, a plastic-based injection-molded product was developed using tungsten as an eco-friendly alternative to lead. A new process technology was required for mixing tungsten-which can be difficult to process-with a polymer. Consequently, the mixing conditions within the injection molding machine and the related compounding technology factors were analyzed. The process technology considered the pre-mixing method using powdery polymer, particle dispersion method, number of screw rotations, and amount of filler input. The product's shielding performance was then analyzed. The tungsten content of the 2-mm thick barrier manufactured using the proposed method was 90 wt%, and the lead equivalent was 0.321 mmPb. To increase the effectiveness of injection molding in the manufacturing process, specific hourly compounding conditions were proposed. Consequently, the process technology method developed in this study can be considered suitable for manufacturing various shielding barriers.

Preparation and Performance Evaluation of X-ray-Shielding Barium Sulfate Film for Medical Diagnosis Using PET Recycling and Multi-Carrier Principles

The use of disposable containers and packaging materials has increased due to the recent COVID-19 pandemic. Thus, the generation of plastic waste is also increasing, and research on recycling such waste is being actively conducted. In this study, an X-ray-shielding film for medical diagnosis was manufactured by mixing a radiation-shielding material and a plastic waste-based polymer material and its effectiveness was evaluated. The film, which is intended as a fabric for a shielding garment, consists of barium sulfate (BaSO4) shielding nanoparticles embedded in a matrix of polyethylene terephthalate (PET), a commonly available waste plastic material. A particle-dispersing technology, which can improve the ratio between the shielding and matrix materials while maintaining the tensile strength of the film, was studied. Therefore, to increase the content of the barium sulfate (BaSO4) nanoparticles used as the shielding material, this multi-carrier method—under which the particles are dispersed in units of time—was developed to improve the shielding performance. Compared with the effectiveness of lead (Pb) shielding film, the 3 mm barium sulfate film developed in this study satisfies the lead equivalent of 0.150 mmPb when stacked in two layers. Therefore, a shielding film was successfully manufactured by using plastic waste as a polymer resin and barium sulfate, an eco-friendly radiation-shielding material, instead of lead.

Performance of Nanocomposites of a Phase Change Material Formed by the Dispersion of MWCNT/TiO2 for Thermal Energy Storage Applications

Thermal energy storage technology is an important topic, as it enables renewable energy technology to be available 24/7 and under different weather conditions. Phase changing materials (PCM) are key players in thermal energy storage, being the most economic among those available with adjustable thermal properties. Paraffin wax (PW) is one of the best materials used in industrial processes to enhance thermal storage. However, the low thermal conductivity of PW prevents its thermal application. In this study, we successfully modified PW based on multi-walled carbon nanotubes (MWCNT) with different concentrations of TiO₂—3, 5 and 7 wt.%. The morphology of PCM and its relationship with the chemical structure and stability were characterized using scanning electron microscopy (SEM), Fourier transform infrared (FTIR) and Thermogravimetric analysis (TGA). As a result, the composites achieved a highest latent heat enthalpy of 176 J/g, in addition to enhanced thermal stability after 15 thermal cycles, and reliability, with a slight change in latent heat observed when using a differential scanning calorimeter (DSC). The thermal conductivity of the composites could significantly be enhanced by 100%. Compared to pure paraffin, the PCM composites developed in this study exhibited an excellent preference for thermal energy storage and possessed low cost, high reliability, and phase change properties.

Irradiation Effects in Polymer Composites for Their Conversion into Hybrids

In this paper several aspects of profound modifications caused by high energy exposures are presented as possible candidates for the efficient adjusting processing of polymer materials. The class of hybrid composites receives special attention due to the large spectrum of formulations, where the interphase interaction decisively influences the material properties. They represent potential start points for the intimate uniformity of hybrid morphologies. Their radiation processing turns composites onto hybrid morphology with expected features, because the transferred energy is spent for the modification of components and for their compatibility. The essential changes achieved in radiation processed composites explain the new material behavior and durability based on the peculiar restructuring of polymer molecules that occurred in the polymer phase. During high energy irradiation, the interaction between intermediates born in the constitutive phases may convert the primary composites into hybrids, integrating them into large applicability spheres. During the radiation exposure, the resulting hybrids gain a continuous dispersion by means of new chemical bonds. This type of compounds achieves some specific structural modifications in the polymer phase, becoming stable hybrid composites. The functional properties of hybrids definitely influence the material behavior due to the molecular changes based on the structural reasons. The radiolysis of the vulnerable component becomes an appropriate opportunity for the creation of new material with improved stability. The radiation treatment is a proper conversion procedure by which common mixtures may become continuously reorganized. This review presents several examples for the radiation modifications induced by radiation exposure that allow the compatibilization and binding of components as well as the creation of new structures with improved properties. This approach provides the reference patterns for the extension of radiation processing over the well-conducted adjustments of polymer composites, when certain material features are compulsorily required. From this review, several solutions for the adjustment of regular polymer composites into hybrid systems may become conceivable by the extended radiation processing.

Nanoceramic Composites for Nuclear Radiation Attenuation

The development of radiation attenuation materials with lean cross-sections is the need of the hour. However, the inherent threat of radiations accompanying these processes is of major concern. Thus, in an attempt to shield unnecessary radiations, several novel materials have been fabricated alongside the conventional materials available. Yet, there is a need for cost-effective, efficient shielding materials that have good mechanical strength and effective shielding properties. The present work investigates ceramic composite behaviors and radiation shielding capacity reinforced with lead oxide nano-powder. Developed nano-lead-based cement composites were subjected to mechanical tests to determine flexural and compressive strengths to check their suitability for structural applications. Further, the gamma attenuation test of the composites was conducted to determine their neutron absorption capacity. The addition of nano-leadoxide in the control beams was varied from 0.7 to 0.95 and 1 wt.% of the ceramic matrix. The percentage of nano-leadoxide that gives the best results in both enhanced properties and economic aspects was determined to be 0.6 wt.% of the cement.