Layer-by-Layer Assembly of Polystyrene/Ag for a Highly Reproducible SERS Substrate and Its Use for the Detection of Food Contaminants

Carbon nanobelts with zigzag and armchair edge and interlocked carbon nanobelts for chirality

This paper presents a theoretical study on the optical properties of carbon nanobelts with zigzag and armchair edges, as well as interlocked carbon nanobelts for chirality. The results demonstrate that two photon absorption (TPA) and electronic circular dichroism (ECD) techniques can effectively differentiate carbon nanoribbons with different boundaries, revealing their relationship and distinguishing features. The findings from this research contribute to a better comprehension of carbon nanoribbons, mechanically interlocked molecules, and chirality.

Versatile flexible SERS substrate for in situ detection of contaminants in water and fruits based on Ag NPs decorated wrinkled PDMS film

Flexible surface-enhanced Raman spectroscopy (SERS) substrate has attracted great attention due to its convenient sampling and on-site monitoring capability. However, it is still challenging to fabricate a versatile flexible SERS substrate, which can be used for in situ detection of analytes either in water or on irregular solid surfaces. Here, we report a flexible and transparent SERS substrate based on a wrinkled polydimethylsiloxane (PDMS) film obtained by transferring corrugated structures on the aluminium/polystyrene bilayer film, onto which silver nanoparticles (Ag NPs) are deposited by thermal evaporation. The as-fabricated SERS substrate exhibits a high enhancement factor (∼1.19×10⁵), good signal uniformity (RSD of 6.27%), and excellent batch-to-batch reproducibility (RSD of 7.3%) for rhodamine 6 G. In addition, the Ag NPs@W-PDMS film can maintain high detection sensitivity even after mechanical deformations of bending or torsion for 100 cycles. More importantly, being flexible, transparent, and light, the Ag NPs@W-PDMS film can both float on the water surface and conformally contact with the curved surface for in situ detection. The malachite green in aqueous environment and on apple peel can be easily detected down to 10^-6 M with a portable Raman spectrometer. Therefore, it is expected that such a versatile flexible SERS substrate has great potential in on-site, in situ contaminant monitoring for realistic applications.

Open nanocavity-assisted Ag@PDMS as a soft SERS substrate with ultra-sensitivity and high uniformity

To achieve high sensitivity and uniformity simultaneously in a surface-enhanced Raman scattering (SERS) substrate, this paper presents the preparation of a flexible and transparent three-dimensional (3D) ordered hemispherical array polydimethylsiloxane (PDMS) film. This is achieved by self-assembling a single-layer polystyrene (PS) microsphere array on a silicon substrate. The liquid-liquid interface method is then used to transfer Ag nanoparticles onto the PDMS film, which includes open nanocavity arrays created by etching the PS microsphere array. An open nanocavity assistant soft SERS sample, "Ag@PDMS," is then prepared. For electromagnetic simulation of our sample, we utilized Comsol software. It has been experimentally confirmed that the Ag@PDMS substrate with silver particles of 50 nm in size is capable of achieving the largest localized electromagnetic hot spots in space. The optimal sample, Ag@PDMS, exhibits ultra-high sensitivity towards Rhodamine 6 G (R6G) probe molecules, with a limit of detection (LOD) of 10^-15 mol/L, and an enhancement factor (EF) of ∼10¹². Additionally, the substrate exhibits a highly uniform signal intensity for probe molecules, with a relative standard deviation (RSD) of approximately 6.86%. Moreover, it is capable of detecting multiple molecules and can perform real detection on non-flat surfaces.

Cardanol-based adhesive with reduced formaldehyde emission to produce particleboards with waste from bean crops

Free formaldehyde is a carcinogen whose emission reduction in particleboard has been studied recently to mitigate this environmental and human health problem. One alternative to reduce the emission of formaldehyde in particleboards is by using adhesives produced from natural sources. Cardanol-formaldehyde is an environmentally friendly adhesive made with cashew nut liquid, a byproduct from the cashew chain. This work aimed to produce particleboard using cardanol-formaldehyde in place of urea. In addition, different proportions of bean straw wastes were used to replace pine wood. The combination of eco-friendly adhesive and lignocellulosic waste particles could result in a product that meets market demands while being environmentally nonaggressive. Cardanol-formaldehyde promoted a higher modulus of elasticity (MOE) (1172 MPa) and modulus of rupture (MOR) (4.39 MPa) about panels glued with urea-formaldehyde, which presented a MOE of 764 MPa and MOR of 2.45 MPa. Furthermore, the cardanol-formaldehyde adhesive promoted a 93% reduction in formaldehyde emission, with a reduction from 16.76 to 1.09 mg/100 g oven-dry board for particleboards produced with cardanol-formaldehyde, indicating potential as an adhesive in the particleboard industry.

Silent region barcode particle arrays for ultrasensitive multiplexed SERS detection

Suspension arrays are a critical components of next generation multiplexed detection technologies. Current fluorescence suspension arrays are limited by a multiplexed coding ceiling and difficulties with ultrasensitive detection. Raman mode is a promising substitute, but the complex spectral peak distributions and extremely weak intrinsic signal intensity severely diminish Raman signal performance in suspension arrays. To address these limitations, we constructed a Raman suspension array system using plasmonic microbeads as barcode substrates and Au nanoflowers as reporter carriers. The well-designed shell morphology and plasmonic microbead composition enabled significant surface enhancement Raman scattering (SERS) such that we were able to adjust silent region Raman-coding intensity levels. Due to synergistic SERS effects from the plasmonic shell and the multi-branched Au nanoflower nanostructure, the reporting signal was greatly improved, enabling ultrasensitive detection of 5-plexed lung cancer markers. Detection in patient serum samples demonstrated good consistency with the standard electrochemiluminescence method. Thus, this silent region SERS barcode-based suspension array is a developmental advance for modern multiplexed biodetection, potentially providing a powerful early disease screening and diagnosis tool.

Flexible surface-enhanced Raman scatting substrates: recent advances in their principles, design strategies, diversified material selections and applications

Surface-enhanced Raman scattering (SERS) is widely used as a powerful analytical technology in cutting-edge areas such as food safety, biology, chemistry, and medical diagnosis, providing ultra-fast, ultra-sensitive, nondestructive characterization and achieving ultra-high detection sensitivity even down to the single-molecule level. Development of Raman spectroscopy is strongly dependent on high-performance SERS substrates, which have long evolved from the early days of rough metal electrodes to periodic nanopatterned arrays building on solid supporting substrates. For rigid SERS substrates, however, their applications are restricted by sophisticated pretreatments for detecting solid samples with non-planar surfaces. It is therefore essential to reassert the principles in constructing flexible SERS substrates. Herein, we comprehensively review the state-of-the-art in understanding, preparing and using flexible SERS. The basic mechanisms behind the flexible SERS are briefly outlined, typical design strategies are highlighted and diversified selection of materials in preparing flexible SERS substrates are reviewed. Then the recent achievements of various interdisciplinary applications based on flexible SERS substrates are summarized. Finally, the challenges and perspectives for future evolution of flexible SERS and their applications are demonstrated. We propose new research directions focused on stimulating the real potential of SERS as an advanced analytical technique for commercialization.

Preparation of Plasmonic Ag@PS Composite via Seed-Mediated In Situ Growth Method and Application in SERS

The colloidal polystyrene (PS) was synthesized and decorated with silver nanoparticles (Ag NPs). The plasmonic Ag@PS nanocomposite was prepared by loading Ag NPs on PS microsphere through a seed-mediated in situ growth route. The property of Ag NPs deposited on the PS microsphere could be precisely controlled by adjusting the concentration of the chemicals used in the growth medium. The growth step is only limited by the diffusion of growing species in the growth media to the surface of the Ag seed. The Ag@PS prepared via the in situ growth method exhibited two advantages compared with the self-assembled PS/Ag. First, the high-density of Ag NPs were successfully deposited on the surface of PS as the electroless-deposited Ag seed process, which brings nearly three times SERS enhancement. Second, the rapid preparation process for in situ growth method (half an hour, 10 h for the self-assembled method). The PS/Ag could detect Nile blue A (NBA) down to 10^–7 M by SERS. Furthermore, the plasmonic Ag@PS SERS substrate was used for pesticide identification. The on-site monitoring malachite green (MG) from fish was achieved by portable Raman spectrometer, and the limit of detection (LOD) was 0.02 ppm. The Ag@PS substrate has also shown capability for simultaneously sensing multiple pesticides by SERS.

Application of two-dimensional layered materials in surface-enhanced Raman spectroscopy (SERS)

2D materials are promising SERS substrates. Seven feasible strategies to improve the SERS performance of 2D substrate materials are summarized. The prospect of future progress in SERS and possible challenges of 2D layered materials are put forwarded.