Selectively Etched Halloysite Nanotubes as Performance Booster of Epoxidized Natural Rubber Composites

Pesticide Nanoformulations Based on Sunlight-Activated Controlled Release of Abamectin

A controlled release system that enables the sunlight-triggered release of a model agrochemical, abamectin (abm), is presented. The release system consists of polydopamine functionalized halloysite nanotubes (HNT-PDA) utilized as photothermal nanocarriers to encapsulate 25 wt % abm and 37 wt % lauric acid (LA), a phase change material, that acts as a heat-activable gatekeeper stopping or facilitating the abm release. When exposed to sunlight for 20 min at 1 and 3 sun light density, the temperature of the photothermal nanocarriers reaches 51 and 122 °C, respectively, which triggers the melting of LA and the consequent release of abm from the nanocarriers. Abm was shown to be released gradually over a period of 10 days when nanohybrids were exposed to sunlight for 6 h per day and to remain stable and kill Myzus persicae (Sulzer) (Hemiptera: Aphididae), green peach aphids, at a mortality rate of over 70% for at least 10 days. Aqueous dispersions of the LA/abm@HNT-PDA nanohybrids were studied in terms of their potential as aqueous sprayable pesticide nanoformulations and presented over 30% suspensibility, 36 mg/cm2 foliar retention, strong rainwater resistance, and a 50% mortality rate for M. persicae at a concentration of 9 mg/mL. The proposed sunlight-activated controlled release system based on photothermal, LA-functionalized HNT-PDA nanocarriers holds great potential as controlled release pesticide nanoformulations.

Assessing the effect of acid and alkali treatment on a halloysite-based catalyst for dry reforming of methane

Dry reforming of methane (DRM) has recently received wide attention owing to its outstanding performance in the reduction and conversion of CH4 and CO2 to syngas (H2 and CO). From an industrial perspective, nickel (Ni)-supported catalysts have been deemed among the most suitable catalysts for DRM owing to their low cost and high activity compared to noble metals. However, a downside of nickel catalysts is their high susceptibility to deactivation due to coke formation and sintering at high temperatures. Using appropriate supports and preparation methods plays a major role in improving the activity and stability of Ni-supported catalysts. Halloysite nanotubes (HNTs) are largely utilized in catalysis as a support for Ni owing to their abundance, low cost, and ease of preparation. The treatment of HNTs (chemical or physical) prior to doping with Ni is considered a suitable method for increasing the overall performance of the catalyst. In this study, the surface of HNTs was activated with acids (HNO3 and H2SO4) and alkalis (NaOH and Na2CO3 + NaNO3) prior to Ni doping to assess the effects of support treatment on the stability, activity, and longevity of the catalyst. Nickel catalysts on raw HNT, acid-treated HNT, and alkali-treated HNT supports were prepared via wet impregnation. A detailed characterization of the catalysts was conducted using X-ray diffraction (XRD), BET surface area analysis, scanning electron microscopy (SEM), transmission electron microscopy (TEM), solid-state nuclear magnetic resonance (ssNMR), H2-temperature programmed reduction, (H2-TPR), CO2-temperature programmed desorption (CO2-TPD), and Ni-dispersion via H2-pulse chemisorption. Our results reveal a clear alteration in the structure of HNTs after treatment, while elemental mapping shows a uniform distribution of Ni throughout all the different supports. Moreover, the supports treated with a molten salt method resulted in the overall highest CO2 and CH4 conversion among the studied catalysts and exhibited high stability over 24 hours testing.

Halloysite Nanotube as a Functional Material for Active Food Packaging Application: A Review

Halloysite nanotubes (HNTs) are naturally occurring nanomaterials with a tubular shape and high aspect ratio, a promising functional additive for active food packaging applications. HNTs have been shown to possess unique properties such as high surface area, thermal stability, and biocompatibility, making them attractive for active food packaging materials. This review summarizes recent research on the use of HNTs as functional additives in active food packaging applications, including antimicrobial packaging, ethylene scavenging packaging, moisture, and gas barrier packaging. The potential benefits and challenges associated with the incorporation of HNTs into food packaging materials are discussed. The various modification methods, such as the physical, chemical, biological, and electrostatic methods, along with their impact on the properties of HNTs, are discussed. The advantages and challenges associated with each modification approach are also evaluated. Overall, the modification of HNTs has opened new possibilities for the development of advanced packaging materials with improved performance for various functional food packaging materials with enhanced properties and extended shelf life.

Synthesis and Characterization of Carvedilol-Etched Halloysite Nanotubes Composites with Enhanced Drug Solubility and Dissolution Rate

Carvedilol is a poorly water-soluble drug employed to treat chronic heart failure. In this study, we synthesize new carvedilol-etched halloysite nanotubes (HNTs) composites to enhance solubility and dissolution rate. The simple and feasible impregnation method is used for carvedilol loading (30-37% weight). Both the etched HNTs (acidic HCl and H₂SO₄ and alkaline NaOH treatments) and the carvedilol-loaded samples are characterized by various techniques (XRPD, FT-IR, solid-state NMR, SEM, TEM, DSC, and specific surface area). The etching and loading processes do not induce structural changes. The drug and carrier particles are in intimate contact and their morphology is preserved, as demonstrated by TEM images. The ²⁷Al and ¹³C solid-state NMR and FT-IR findings show that carvedilol interactions involve the external siloxane surface, especially the aliphatic carbons, the functional groups, and, by inductive effect, the adjacent aromatic carbons. All the carvedilol-halloysite composites display enhanced dissolution rate, wettability, and solubility, as compared to carvedilol. The best performances are obtained for the carvedilol-halloysite system based on HNTs etched with HCl 8M, which exhibits the highest value of specific surface area (91 m² g^-1). The composites make the drug dissolution independent of the environmental conditions of the gastrointestinal tract and its absorption less variable, more predictable, and independent from the pH of the medium.

Synergies in antimicrobial treatment by a levofloxacin-loaded halloysite and gold nanoparticles with a conjugation to a cell-penetrating peptide

Herein, a novel designed antimicrobial therapeutic drug delivery system is presented, in which halloysite nanotubes (HNTs) encapsulate a determined dosage of levofloxacin (lvx). Moreover, gold nanoparticles (AuNPs) have been embedded into the structure for plasmonic heating under irradiation of the green LED light (7 W, 526 nm). It was revealed that the plasmonic heating of the AuNPs leads to a controlled trend in the lvx release process. Also, a synergistic effect on the antimicrobial activity of the prepared therapeutic system has been observed through photothermal heating of the structure. To enhance the cell adhesion, a cell-penetrating peptide sequence (CPP) is conjugated to the surfaces. This CPP has led to quick co-localization of the prepared nano-cargo (denoted as lvx@HNT/Au-CPP) with the bacterial living cells and further attachment (confirmed by confocal microscopy). Concisely, the structure of the designed nano-cargo has been investigated by various methods, and the in vitro cellular experiments (zone of inhibition and colony-counting) have disclosed that the antimicrobial activity of the lvx is significantly enhanced through incorporation into the HNT/Au-CPP delivery system (drug content: 16 wt%), in comparison with the individual lvx with the same dosage. Hence, it can be stated that the bacterial resistance against antibiotics and the toxic effects of the chemical medications are reduced through the application of the presented strategy.

Fast Evaluation and Comparison of the Energy Performances of Elastomers from Relative Energy Stored Identification under Mechanical Loadings

The way in which elastomers use mechanical energy to deform provides information about their mechanical performance in situations that require substantial characterization in terms of test time and cost. This is especially true since it is usually necessary to explore many chemical compositions to obtain the most relevant one. This paper presents a simple and fast approach to characterizing the mechanical and energy behavior of elastomers, that is, how they use the mechanical energy brought to them. The methodology consists of performing one uniaxial cyclic tensile test with a simultaneous temperature measurement. The temperature measurement at the specimen surface is processed with the heat diffusion equation to reconstruct the heat source fields, which in fact amounts to surface calorimetry. Then, the part of the energy involved in the mechanical hysteresis loop that is not converted into heat can be identified and a quantity γse is introduced for evaluating the energy performance of the materials. This quantity is defined as an energy ratio and assesses the ability of the material to store and release a certain amount of mechanical energy through reversible microstructure changes. Therefore, it quantifies the relative energy that is not used to damage the material, for example to propagate cracks, and that is not dissipated as heat. In this paper, different crystallizable materials have been considered, filled and unfilled. This approach opens many perspectives to discriminate, in an accelerated way, the factors affecting these energetic performances of elastomers, at the first order are obviously the formulation, the aging and the mechanical loading. In addition, such an approach is well adapted to better characterize the elastocaloric effects in elastomeric materials.