Characterization 0.1 wt.% Nanomaterial/Photopolymer Composites with Poor Nanomaterial Dispersion: Viscosity, Cure Depth and Dielectric Properties

Vat photopolymerization-based 3D printing of polymer nanocomposites: current trends and applications

The synthesis and manufacturing of polymer nanocomposites have garnered interest in recent research and development because of their superiority compared to traditionally employed industrial materials. Specifically, polymer nanocomposites offer higher strength, stronger resistance to corrosion or erosion, adaptable production techniques, and lower costs. The vat photopolymerization (VPP) process is a group of additive manufacturing (AM) techniques that provide the benefit of relatively low cost, maximum flexibility, high accuracy, and complexity of the printed parts. In the past few years, there has been a rapid increase in the understanding of VPP-based processes, such as high-resolution AM methods to print intricate polymer parts. The synergistic integration of nanocomposites and VPP-based 3D printing processes has opened a gateway to the future and is soon expected to surpass traditional manufacturing techniques. This review aims to provide a theoretical background and the engineering capabilities of VPP with a focus on the polymerization of nanocomposite polymer resins. Specifically, the configuration, classification, and factors affecting VPP are summarized in detail. Furthermore, different challenges in the preparation of polymer nanocomposites are discussed together with their pre- and post-processing, where several constraints and limitations that hinder their printability and photo curability are critically discussed. The main focus is the applications of printed polymer nanocomposites and the enhancement in their properties such as mechanical, biomedical, thermal, electrical, and magnetic properties. Recent literature, mainly in the past three years, is critically discussed and the main contributing results in terms of applications are summarized in the form of tables. The goal of this work is to provide researchers with a comprehensive and updated understanding of the underlying difficulties and potential benefits of VPP-based 3D printing of polymer nanocomposites. It will also help readers to systematically reveal the research problems, gaps, challenges, and promising future directions related to polymer nanocomposites and VPP processes.

Piezoelectric Ceramic/Photopolymer Composites Curable with UV Light: Viscosity, Curing Depth, and Dielectric Properties

Four piezoelectric ceramic materials with varying particle sizes and geometries are added up to 30 vol.% to a photopolymer resin to form UV-curable piezoelectric composites. Such composites solidify in a few minutes, can be used in UV-curing-based 3D printing processes, and can achieve improved sensor performance. The particle dispersion with ultrasonication shows the most homogeneous particle dispersion with ethanol, while two other solvents produced similar results. The viscosities of the prepared suspensions show some dependency on the particle size. The curing depth results show a strong dependency on the ceramic particle size, the difference in refractive index, and the particle size distribution, whereby composites filled with PZT produced the worst results and composites filled with KNN produced the highest curing depths. The SEM images show a homogeneous dispersion of ceramic particles. The highest dielectric properties are also shown by KNN-filled composites, while BTO and PZT produced mixed results of dielectric constants and dielectric losses. KNN-filled composites seem to be very promising for further 3D-printable, lead-free piezoelectric composite development.