PVP/Highly Dispersed AgNPs Nanofibers Using Ultrasonic-Assisted Electrospinning

Optimization of Electrospinning Parameters for Lower Molecular Weight Polymers: A Case Study on Polyvinylpyrrolidone

Polyvinylpyrrolidone (PVP) is a synthetic polymer that holds significance in various fields such as biomedical, medical, and electronics, due to its biocompatibility and exceptional dielectric properties. Electrospinning is the most commonly used tool to fabricate fibers because of its convenience and the wide choice of parameter optimization. Various parameters, including solution molarity, flow rate, voltage, needle gauge, and needle-to-collector distance, can be optimized to obtain the desired morphology of the fibers. Although PVP is commercially available in various molecular weights, PVP with a molecular weight of 130,000 g/mol is generally considered to be the easiest PVP to fabricate fibers with minimal challenges. However, the fiber diameter in this case is usually in the micron regime, which limits the utilization of PVP fibers in fields that require fiber diameters in the nano regime. Generally, PVP with a lower molecular weight, such as 10,000 g/mol and 55,000 g/mol, is known to present challenges in fiber preparation. In the current study, parameter optimization for PVP possessing molecular weights of 10,000 g/mol and 55,000 g/mol was carried out to obtain nanofibers. The electrospinning technique was utilized for fiber fabrication by optimizing the above-mentioned parameters. SEM analysis was performed to analyze the fiber morphology, and quantitative analysis was performed to correlate the effect of parameters on the fiber morphology. This research study will lead to various applications, such as drug encapsulation for sustained drug release and nanoparticles/nanotubes encapsulation for microwave absorption applications.

Silver Bionanocomposites as Active Food Packaging: Recent Advances & Future Trends Tackling the Food Waste Crisis

Food waste is a pressing global challenge leading to over $1 trillion lost annually and contributing up to 10% of global greenhouse gas emissions. Extensive study has been directed toward the use of active biodegradable packaging materials to improve food quality, minimize plastic use, and encourage sustainable packaging technology development. However, this has been achieved with limited success, which can mainly be attributed to poor material properties and high production costs. In the recent literature, the integration of silver nanoparticles (AgNPs) has shown to improve the properties of biopolymer, prompting the development of bionanocomposites. Furthermore, the antibacterial properties of AgNPs against foodborne pathogens leads towards food shelf-life improvement and provides a route towards reducing food waste. However, few reviews have analyzed AgNPs holistically throughout a portfolio of biopolymers from an industrial perspective. Hence, this review critically analyses the antibacterial, barrier, mechanical, thermal, and water resistance properties of AgNP-based bionanocomposites. These advanced materials are also discussed in terms of food packaging applications and assessed in terms of their performance in enhancing food shelf-life. Finally, the current barriers towards the commercialization of AgNP bionanocomposites are critically discussed to provide an industrial action plan towards the development of sustainable packaging materials to reduce food waste.

Studies on the Application of Polyimidobenzimidazole Based Nanofiber Material as the Separation Membrane of Lithium-Ion Battery

Aromatic polyimide has good mechanical properties and high-temperature resistance. Based on this, benzimidazole is introduced into the main chain, and its intermolecular (internal) hydrogen bond can increase mechanical and thermal properties and electrolyte wettability. Aromatic dianhydride 4,4'-oxydiphthalic anhydride (ODPA) and benzimidazole-containing diamine 6,6'-bis [2-(4-aminophenyl)benzimidazole] (BAPBI) were synthesized by means of a two-step method. Imidazole polyimide (BI-PI) was used to make a nanofiber membrane separator (NFMS) by electrospinning process, using its high porosity and continuous pore characteristics to reduce the ion diffusion resistance of the NFMS, enhancing the rapid charge and discharge performance. BI-PI has good thermal properties, with a Td5% of 527 °C and a dynamic mechanical analysis Tg of 395 °C. The tensile strength of the NFMS increased from 10.92MPa to 51.15MPa after being hot-pressed. BI-PI has good miscibility with LIB electrolyte, the porosity of the film is 73%, and the electrolyte absorption rate reaches 1454%. That explains the higher ion conductivity (2.02 mS cm^-1) of NFMS than commercial one (0.105 mS cm^-1). When applied to LIB, it is found that it has high cyclic stability and excellent rate performance at high current density (2 C). BI-PI (120 Ω) has a lower charge transfer resistance than the commercial separator Celgard H1612 (143 Ω).

Assessment of the Impacts of Green Synthesized Silver Nanoparticles on Maerua oblongifolia Shoots under In Vitro Salt Stress

Salinity is one of the major abiotic stresses that affect the plant’s growth and development. Recently, the contribution of nanoparticles (NPs) to ameliorating salinity stresses has become the new field of interest for scientists due to their special physiochemical properties in the biological system. This study is designed to examine the effects of biosynthesized silver nanoparticles (AgNPs) spherical in shape (size range between 9 and 30 nm) on morphophysiological characteristics and the antioxidant defense system of in vitro raised Maerua oblongifolia under four levels of salt stress (0, 50, 100, and 200 mM NaCl). Our findings reveal that the application of AgNPs (0, 10, 20, and 30 mg/L) to M. oblongifolia shoots significantly alleviates the adverse effects of salt stress and ameliorates plant developmental-related parameters and defense systems. High salinity elevates the oxidative damage by over-accumulation of the levels of total soluble sugars, proline, hydrogen peroxide (H₂O₂), and malondialdehyde (MDA). In addition, enhancing the activity of the antioxidant enzymes, total phenolic, and flavonoid content over the control. Interestingly, the application of AgNPs to salinized plants improved the growth traits and photosynthetic pigment production and caused higher enhancement in antioxidant enzyme activities. Furthermore, mitigating the oxidative damage by lowering the accumulation of proline, soluble sugars, H₂O₂, MDA, and total phenolic and flavonoid contents in salt-stressed plants. In general, AgNPs augmented the growth of M. oblongifolia shoots under saline conditions through different strategies; thus, AgNPs can be used as an appropriate eco-friendly approach that enhances salinity tolerance in plants.