Effectiveness and Applications of a Metal-Coated HNT/Polylactic Acid Antimicrobial Filtration System

Porous Conductive Textiles for Wearable Electronics

Over the years, researchers have made significant strides in the development of novel flexible/stretchable and conductive materials, enabling the creation of cutting-edge electronic devices for wearable applications. Among these, porous conductive textiles (PCTs) have emerged as an ideal material platform for wearable electronics, owing to their light weight, flexibility, permeability, and wearing comfort. This Review aims to present a comprehensive overview of the progress and state of the art of utilizing PCTs for the design and fabrication of a wide variety of wearable electronic devices and their integrated wearable systems. To begin with, we elucidate how PCTs revolutionize the form factors of wearable electronics. We then discuss the preparation strategies of PCTs, in terms of the raw materials, fabrication processes, and key properties. Afterward, we provide detailed illustrations of how PCTs are used as basic building blocks to design and fabricate a wide variety of intrinsically flexible or stretchable devices, including sensors, actuators, therapeutic devices, energy-harvesting and storage devices, and displays. We further describe the techniques and strategies for wearable electronic systems either by hybridizing conventional off-the-shelf rigid electronic components with PCTs or by integrating multiple fibrous devices made of PCTs. Subsequently, we highlight some important wearable application scenarios in healthcare, sports and training, converging technologies, and professional specialists. At the end of the Review, we discuss the challenges and perspectives on future research directions and give overall conclusions. As the demand for more personalized and interconnected devices continues to grow, PCT-based wearables hold immense potential to redefine the landscape of wearable technology and reshape the way we live, work, and play.

Bacterial Response to the Surface Aging of PLA Matrices Loaded with Active Compounds

The use of active components in biomaterials improves the properties of existing ones and makes it possible to obtain new devices with antibacterial properties that prevent infections after implantation, thus guaranteeing the success of the implant. In this work, cetyltrimethylammonium bromide (CTAB) and magnesium particles were incorporated into polylactic acid (PLA) films to assess the extent to which progressive aging of the new surfaces resists bacterial colonization processes. For this purpose, the films' surface was characterized by contact angle measurements, ToF-SIMS and AFM, and adhesion, viability and biofilm growth of Staphylococcus epidermidis bacteria on these films were also evaluated. The results show that the inclusion of Mg and CTAB in PLA films changes their surface properties both before and after aging and also modifies bacterial adhesion on the polymer. Complete bactericidal activity is exhibited on non-degraded films and films with CTAB. This antibacterial behavior is maintained after degradation for three months in the case of films containing a higher amount of CTAB.

Optimal Design of Wood/Rice Husk-Waste-Filled PLA Biocomposites Using Integrated CRITIC–MABAC-Based Decision-Making Algorithm

Based on the criteria importance through inter-criteria correlation (CRITIC) and the multi-attributive border approximation area comparison (MABAC), a decision-making algorithm was developed to select the optimal biocomposite material according to several conflicting attributes. Poly(lactic acid) (PLA)-based binary biocomposites containing wood waste and ternary biocomposites containing wood waste/rice husk with an overall additive content of 0, 2.5, 5, 7.5 and 10 wt.% were manufactured and evaluated for physicomechanical and wear properties. For the algorithm, the following performance attributes were considered through testing: the evaluated physical (density, water absorption), mechanical (tensile, flexural, compressive and impact) and sliding wear properties. The water absorption and strength properties were found to be the highest for unfilled PLA, while modulus performance remained the highest for 10 wt.% rice husk/wood-waste-added PLA biocomposites. The density of PLA biocomposites increased as rice husk increased, while it decreased as wood waste increased. The lowest and highest density values were recorded for 10 wt.% wood waste and rice husk/wood-waste-containing PLA biocomposites, respectively. The lowest wear was exhibited by the 5 wt.% rice husk/wood-waste-loaded PLA biocomposite. The experimental results were composition dependent and devoid of any discernible trend. Consequently, prioritizing the performance of PLA biocomposites to choose the best one among a collection of alternatives became challenging. Therefore, a decision-making algorithm, called CRITIC–MABAC, was used to select the optimal composition. The importance of attributes was determined by assigning weight using the CRITIC method, while the MABAC method was employed to assess the complete ranking of the biocomposites. The results achieved from the hybrid CRITIC–MABAC approach demonstrated that the 7.5 wt.% wood-waste-added PLA biocomposite exhibited the optimal physicomechanical and wear properties.

A Review on Antibacterial Biomaterials in Biomedical Applications: From Materials Perspective to Bioinks Design

In tissue engineering, three-dimensional (3D) printing is an emerging approach to producing functioning tissue constructs to repair wounds and repair or replace sick tissue/organs. It allows for precise control of materials and other components in the tissue constructs in an automated way, potentially permitting great throughput production. An ink made using one or multiple biomaterials can be 3D printed into tissue constructs by the printing process; though promising in tissue engineering, the printed constructs have also been reported to have the ability to lead to the emergence of unforeseen illnesses and failure due to biomaterial-related infections. Numerous approaches and/or strategies have been developed to combat biomaterial-related infections, and among them, natural biomaterials, surface treatment of biomaterials, and incorporating inorganic agents have been widely employed for the construct fabrication by 3D printing. Despite various attempts to synthesize and/or optimize the inks for 3D printing, the incidence of infection in the implanted tissue constructs remains one of the most significant issues. For the first time, here we present an overview of inks with antibacterial properties for 3D printing, focusing on the principles and strategies to accomplish biomaterials with anti-infective properties, and the synthesis of metallic ion-containing ink, chitosan-containing inks, and other antibacterial inks. Related discussions regarding the mechanics of biofilm formation and antibacterial performance are also presented, along with future perspectives of the importance of developing printable inks.