Updated Perceptions on Polymer-Based Enhanced Oil Recovery Toward High-Temperature High-Salinity Tolerance for Successful Field Applications in Carbonate Reservoirs

Effects of Core Size and Surfactant Choice on Fluid Saturation Development in Surfactant/Polymer Corefloods

Surfactant/polymer flooding allows for a significant increase in oil recovered at both laboratory and field scales. Limitations in application at the reservoir scale are, however, present and can be associated with both the complexity of the underlying displacement process and the time-intensive nature of the up-scaling workflow. Pivotal to this workflow are corefloods which serve to both validate the extent of oil recovery and extract modeling parameters used in upscaling. To enhance the understanding of the evolution of the saturation distribution within the rock sample, we present the utilization of X-ray computed tomography to image six distinct surfactant/polymer corefloods. In doing so, we visualize the formation and propagation of an oil bank by reconstructing multidimensional saturation maps. We conduct experiments on three distinct core sizes and two different surfactants, an SBDS/isbutanol formulation and an L-145-10s 90 formulation, in order to decouple the effect of these two parameters on the flow behavior observed in situ. We note that the oil production post oil bank breakthrough is primarily influenced by the surfactant choice, with the SDBS/isobutanol formulation displaying longer tailing production of a low oil cut. On the other hand, the core size dominated the extent of self-similarity of the saturation profiles with smaller cores showing less overlap in the self-similarity profiles. Consequently, we highlight the difference in applicability of a fractional flow approach to larger and smaller cores for upscaling parameter extraction and thus provide guidance for corefloods where direct imaging is not available.

Impact of the Naturally Driven Surfactant in EOR Application: Experimental, Microscopic, and Numerical Analyses

While synthetic, conventional surfactants have a known negative environmental impact, their high cost poses a significant challenge. In contrast, naturally extracted surfactants are cheaper and are readily available. The applicability of natural surfactants depends on the saponin concentration, extraction, and synthesis methods. Certain parameters, such as their efficiency in obtaining the required interfacial tension (IFT) values, salinity tolerance, and stability under reservoir conditions, must be examined. Kazakhstan produces a substantial quantity of flaxseed, and flaxseed oil is a good source of fatty acids that can be converted to natural surfactants. Therefore, the work aims to identify the potential of the natural-flaxseed oil surfactant. The experimental study evaluated the synthesized surfactant, effective concentration, salinity's effect, interfacial tension, rheology, and oil recovery concerns in vugs limestone. A microscopic study was conducted to provide insight into the flow in the vugus matrix. At the same time, the numerical method was also employed to establish a potential recovery understanding. The Fourier spectrometer results proved the distinct presence of the triterpenoid. The critical micelle concentrations are 6 and 2.5 wt % for solution in 0 and seawater salinity, respectively. The IFT was reduced by 40-48% and is more effective in seawater solutions. The oil additional recovery was 39-50% after surfactants. The presence of a fractured vugus did not affect the success of the application. Despite the difficulty in modeling the system, the numerical results agree with the experiments and show only 7% differences in total recovery. The research offers novel natural surfactants that can be applied in offshore Kazakhstan.

A comprehensive review of viscoelastic polymer flooding in sandstone and carbonate rocks

Polymer flooding is a proven chemical Enhanced Oil Recovery (cEOR) method that boosts oil production beyond waterflooding. Thorough theoretical and practical knowledge has been obtained for this technique through numerous experimental, simulation, and field works. According to the conventional belief, this technique improves macroscopic sweep efficiency due to high polymer viscosity by producing moveable oil that remains unswept after secondary recovery. However, recent studies show that in addition to viscosity, polymer viscoelasticity can be effectively utilized to increase oil recovery by mobilizing residual oil and improving microscopic displacement efficiency in addition to macroscopic sweep efficiency. The polymer flooding is frequently implemented in sandstones with limited application in carbonates. This limitation is associated with extreme reservoir conditions, such as high concentrations of monovalent and divalent ions in the formation brine and ultimate reservoir temperatures. Other complications include the high heterogeneity of tight carbonates and their mixed-to-oil wettability. To overcome the challenges related to severe reservoir conditions, novel polymers have been introduced. These new polymers have unique monomers protecting them from chemical and thermal degradations. Monomers, such as NVP (N-vinylpyrrolidone) and ATBS (2-acrylamido-2-methylpropane sulfonic acid), enhance the chemical resistance of polymers against hydrolysis, mitigating the risk of viscosity reduction or precipitation in challenging reservoir conditions. However, the viscoelasticity of these novel polymers and their corresponding impact on microscopic displacement efficiency are not well established and require further investigation in this area. In this study, we comprehensively review recent works on viscoelastic polymer flow under various reservoir conditions, including carbonates and sandstones. In addition, the paper defines various mechanisms underlying incremental oil recovery by viscoelastic polymers and extensively describes the means of controlling and improving their viscoelasticity. Furthermore, the polymer screening studies for harsh reservoir conditions are also included. Finally, the impact of viscoelastic synthetic polymers on oil mobilization, the difficulties faced during this cEOR process, and the list of field applications in carbonates and sandstones can also be found in our work. This paper may serve as a guide for commencing or performing laboratory- and field-scale projects related to viscoelastic polymer flooding.

Experimental Study on the Application of Cellulosic Biopolymer for Enhanced Oil Recovery in Carbonate Cores under Harsh Conditions

Polymer flooding is used to improve the viscosity of an injectant, thereby decreasing the mobility ratio and improving oil displacement efficiency in the reservoir. Thanks to their environmentally benign nature, natural polymers are receiving prodigious attention for enhanced oil recovery. Herein, the rheology and oil displacement properties of okra mucilage were investigated for its enhanced oil recovery potential at a high temperature and high pressure (HTHP) in carbonate cores. The cellulosic polysaccharide used in the study is composed of okra mucilage extracted from okra (Abelmoschus esculentus) via a hot water extraction process. The morphological property of okra mucilage was characterized with Fourier transform infrared (FTIR), while the thermal stability was investigated using a thermogravimetric analyzer (TGA). The rheological property of the okra mucilage was investigated for seawater salinity and high-temperature conditions using a TA rheometer. Finally, an oil displacement experiment of the okra mucilage was conducted in a high-temperature, high-pressure core flooding equipment. The TGA analysis of the biopolymer reveals that the polymeric solution was stable over a wide range of temperatures. The FTIR results depict that the mucilage is composed of galactose and rhamnose constituents, which are essentially found in polysaccharides. The polymer exhibited pseudoplastic behavior at varying shear rates. The viscosity of okra mucilage was slightly reduced when aged in seawater salinity and at a high temperature. Nonetheless, the cellulosic polysaccharide exemplified sufficiently good viscosity under high-temperature and high-salinity (HTHS) conditions. Finally, the oil recovery results from the carbonate core plug reveal that the okra mucilage recorded a 12.7% incremental oil recovery over waterflooding. The mechanism of its better displacement efficiency is elucidated