Extraction and Physico-Chemical Characterization of Chitosan from Mantis Shrimp (Oratosquilla nepa) Shell and the Development of Bio-Composite Film with Agarose

Antifungal efficacy of chitosan extracted from shrimp shell on strawberry (Fragaria × ananassa) postharvest spoilage fungi

The strong demand for biological materials in the food industry places chitosan at the forefront of other biopolymers. The present study aims to evaluate the antifungal properties of chitosan extracted from shrimp shell waste (Parapenaeus longirostris) against post-harvest strawberry (Fragaria × ananassa) spoilage fungi. The physicochemical characteristics (DD, Mw, and solubility) of extracted chitosan were determined. In addition, functional characteristics were studied by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM). The antifungal effect of chitosan on mycelial growth and spore germination of Aspergillus niger, Botrytis cinerea, Fusarium oxysporum, and Rhizopus stolonifer was evaluated. Yield, degree of deacetylation, molecular weight, and solubility were 21.86%, 83.50%, 180 kDa, and 80.10%, respectively. A degree of deacetylation of 81.27% was calculated from the FTIR spectrum and a crystallinity index of 79.83% was determined from the X-ray diffraction pattern. SEM images of extracted chitosan showed a combination of fibrous and porous structure. At 3% chitosan, mycelial growth inhibition rates of A. niger, B. cinerea, F. oxysporum, and R. stolonifer ranged from 81.37% to 92.70%. At the same chitosan concentration, the percentages of spore germination inhibition of the isolated fungi ranged from 65.47% to 71.48%. The antifungal activity was highly dose-dependent. As a natural polymer, chitosan offers a convincing alternative to synthetic antimicrobials for the post-harvest preservation of strawberries. Its potential lies in its ability to inhibit the growth of spoilage fungi.

Chitosan, chitosan derivatives, and chitosan-based nanocomposites: eco-friendly materials for advanced applications (a review)

For many years, chitosan has been widely regarded as a promising eco-friendly polymer thanks to its renewability, biocompatibility, biodegradability, non-toxicity, and ease of modification, giving it enormous potential for future development. As a cationic polysaccharide, chitosan exhibits specific physicochemical, biological, and mechanical properties that depend on factors such as its molecular weight and degree of deacetylation. Recently, there has been renewed interest surrounding chitosan derivatives and chitosan-based nanocomposites. This heightened attention is driven by the pursuit of enhancing efficiency and expanding the spectrum of chitosan applications. Chitosan's adaptability and unique properties make it a game-changer, promising significant contributions to industries ranging from healthcare to environmental remediation. This review presents an up-to-date overview of chitosan production sources and extraction methods, focusing on chitosan's physicochemical properties, including molecular weight, degree of deacetylation and solubility, as well as its antibacterial, antifungal and antioxidant activities. In addition, we highlight the advantages of chitosan derivatives and biopolymer modification methods, with recent advances in the preparation of chitosan-based nanocomposites. Finally, the versatile applications of chitosan, whether in its native state, derived or incorporated into nanocomposites in various fields, such as the food industry, agriculture, the cosmetics industry, the pharmaceutical industry, medicine, and wastewater treatment, were discussed.

Definition of protocols for cryopreservation and three-dimensional in vitro culture of prepubertal goat testicular tissue after histomorphological, ultrastructural, and functional analysis

This study aims to define the best method (slow freezing or vitrification) and fragment size (1, 5, or 9 mm³) for prepubertal goat testis cryopreservation, as well as to evaluate testicular morphological integrity after cryopreservation and in vitro culture (IVC). Initially (experiment I), 1, 5, or 9 mm³ testis fragments were cryopreserved by slow freezing using a Mr. Frosty container with 20% Dimethylsulfoxide (DMSO) or vitrified using the Ovarian Tissue Cryosystem (OTC) device, (Equilibration solution - ES: 10% DMSO and 10% ethylene glycol - EG; Vitrification solution - VS: 20% DMSO and 20% EG) and then subjected to morphological analysis, type I and III collagen quantification and gene expression (Oct4, C-kit, Bax, and Bcl-2). Subsequently, (experiment II), fresh or cryopreserved by slow freezing testis fragments were cultured in vitro and submitted to morphological analysis by scanning electron microscopy. The data from the experiment I revealed fewer morphological alterations in 1 and 5 mm³ fragments after vitrification and slow freezing, respectively. The percentage of type I collagen fibers in 5 and 9 mm³ frozen was higher than in fresh or vitrified fragments. For type III collagen, fresh or frozen fragments of 1 and 5 mm3 showed a higher percentage than fragments of 9 mm3. Gene expression for Oct4 and C-kit after slow freezing or vitrification in the 5 mm3 fragments was lower than that observed in the fresh fragments. The Bax:Bcl-2 ratio in the 1 and 9 mm³ fragments was lower than in the 5 mm³ fragments for fresh fragments or after freezing. In experiment II, fragments cultured in vitro, previously frozen or not, showed more morphological alterations than fresh or frozen fragments. We concluded that slow freezing of 5 mm³ fragments was the best protocol for cryopreserving prepubertal goat testis and although the results of IVC are encouraging, it still needs improvement to restore testicular function after cryopreservation.

Physicochemical Properties of Chitosan from Green Mussel Shells (Perna viridis): A Comparative Study

Green mussel shells (Perna viridis) are generated in huge amounts and discarded as waste materials. Such waste may be used to produce biopolymer materials such as chitosan. The physicochemical properties of chitosan prepared from different sizes of green mussel shells (small size (CHS): ≤5.00 cm in length and big size (CHB): >5.01 cm in length) were characterized and compared with commercial chitosan (CH). Furthermore, the mechanical and physicochemical properties of the blended films were also investigated. The results of the physicochemical properties showed that CHS and CHB were quite different from CH. The degree of deacetylation of CHS, CHB, and CH was found to be 32.71%, 52.56%, and 70.42%, respectively (p < 0.05). The water- and fat-binding capacities of CH were higher than those of CHS and CHB. Structural differences between CHS, CHB, and CH were studied using Fourier transform infrared spectroscopy (FTIR) and X-ray powder diffraction (XRD). Significant increases in thickness, water vapor permeability, and strength of the blended films were found when the extracted chitosan was added (p < 0.05). However, further study is needed to improve the chitosan extraction process, which can enhance the physicochemical properties of the obtained chitosan and be widely used in many industries.

Physicochemical Properties and Functional Characteristics of Ecologically Extracted Shrimp Chitosans with Different Organic Acids during Demineralization Step

The current study aims to develop eco-friendly and economical chitosans with a wide range of applications using organic acids for shrimp shells demineralization. Chitosan samples were extracted from shrimp (Parapenaeus longirostris) shells and the demineralization step was performed with three organic acids (citric, acetic, and lactic) and two mineral acids (hydrochloric and sulfuric). The chitosans were characterized by Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and scanning electron microscopy (SEM). The chitosans’ physicochemical properties were also determined. The characteristic bands and functional groups of the chitosans were identified by FTIR spectra. The chitosans’ crystallinity order was as follows: ChHCl > ChCitric > ChH2SO4 > ChLactic > ChAcetic. The chitosans’ morphological characteristics revealed a smooth surface and fibrous structures with pores. Chitosans extracted by organic acids showed the highest extraction yields. ChHCl and ChCitric had higher degrees of deacetylation values; 83.67% and 81.47%, respectively. The solubility was proportional to the degree of deacetylation. Furthermore, ChH2SO4 and ChCitric had lower molecular weight values; 149 kDa and 183 kDa, respectively. Organic acids are as effective as mineral acids for shrimp shells demineralization. The developed process opens up possibilities to produce chitin and chitosan in a more eco-friendly way and at a lower cost in many industrial sectors.