Waste Paper as a Valuable Resource: An Overview of Recent Trends in the Polymeric Composites Field

The Use of Various Types of Waste Paper for the Removal of Anionic and Cationic Dyes from Aqueous Solutions

This study examined the possibility of using various types of waste paper-used newsprint (NP), used lightweight coated paper (LWC), used office paper (OP), and used corrugated cardboard (CC)-for the removal of anionic dyes, Acid Red 18 (AR18) and Acid Yellow 23 (AY23), and cationic dyes, Basic Violet 10 (BV10) and Basic Red 46 (BR46), from aqueous solutions. The scope of this research included the characterization of sorbents (FTIR, SEM, BET surface area, porosity, pHPZC, effectiveness of water coloration), determination of pH effect on the effectiveness of dye sorption, sorption kinetics (pseudo-first-order model, second-order model, intraparticular diffusion model), and the maximum sorption capacity (Langmuir models and Freundlich model) of the tested sorbents. The use of waste paper materials as sorbents was found to not pose any severe risk of aquatic environment contamination. AR18, AY23, and BV10 sorption intensities were the highest at pH 2, and that of RB46 at pH 6. The waste paper sorbents proved particularly effective in removing cationic dyes, like in the case of, e.g., NP, which had a sorption capacity that reached 38.87 mg/g and 90.82 mg/g towards BV10 and BR46, respectively, and were comparable with that of selected activated carbons (literature data).

Determination of the Mass Fractions of the Heavy Metals in the Recycled Cellulose Pulp

In the process of paper recycling, certain amounts of metals can be found in the cellulose suspension, the source of which is mainly printing inks. The paper industry often uses different technologies to reduce heavy metal emissions. The recycling of laminated packaging contributes to the formation of sticky particles, which affects the concentration of heavy metals. This study aimed to determine the mass fraction of metals in the different phases of the deinking process to optimize the cellulose pulp's quality and design healthy correct packaging products. In this research, the deinking flotation of laminated and non-laminated samples was carried out by the Ingede 11 method. As a result of the study, the mass fractions of metals in cellulose pulp were divided into four groups according to the mass fraction's increasing value and the metals' increasing electronegativity. The quantities of metals were analyzed using Inductively Coupled Mass Spectrometry (ICP-MS). The separation of metals from cellulose pulp is influenced by the presence of adhesives and the electronegativity of the metal. The results of the study show that the recycling process removes certain heavy metals very well, which indicates the good recycling potential of pharmaceutical cardboard samples.

Improving the Physical and Mechanical Properties of Mycelium-Based Green Composites Using Paper Waste

The growing demand for environmentally friendly and sustainable materials has led to the invention of innovative solutions aiming to reduce negative impacts on the environment. Mycelium-based green composites (MBCs) have become an alternative to traditional materials due to their biodegradability and various potential uses. Although MBCs are accepted as modern materials, there are concerns related to some of their physical and mechanical properties that might have limitations when they are used. This study investigates the effects of using paper waste to improve MBC properties. In this study, we investigated the physical and mechanical properties of MBCs produced from lignocellulosic materials (corn husk and sawdust) and mushroom mycelia of the genus Lentinus sajor-caju TBRC 6266, with varying amounts of paper waste added. Adding paper waste increases the density of MBCs. Incorporating 20% paper waste into corn husks led to the enhancement of the compression, bending, and impact strength of MBCs by over 20%. Additionally, it was also found that the MBCs produced from corn husk and 10% paper waste could help in reducing the amount of water absorbed into the material. Adding paper waste to sawdust did not improve MBC properties. At the same time, some properties of MBCs, such as low tensile strength and high shrinkage, might need to be further improved in the future to unlock their full potential, for which there are many interesting approaches. Moreover, the research findings presented in this publication provide a wealth of insightful information on the possibility of using paper waste to improve MBC performance and expand their suitability for a range of applications in sustainable packaging materials and various home decorative items. This innovative approach not only promotes the efficient utilization of lignocellulosic biomass but also contributes to the development of environmentally friendly and biodegradable alternatives to traditional materials.