Ultrastrong and Tough Urushiol-Based Ionic Conductive Double Network Hydrogels as Flexible Strain Sensors

High mechanical, self-adhesive oxidized guar gum/chitosan hydrogel prepared at room temperature based on a nickel-urushiol catalytic system for wireless wearable sensors

Recently, sensors constructed on the basis of hydrogel are playing a major role in health detection such as motion detection and breathing monitoring. However, the common hydrogels have poor mechanical properties, insufficient adhesion and complex preparation processes, which hinder the further use of such sensors. In this paper, the conductive hydrogel (P(AA-UH)-OGG-CS/NiCl2) composed of acrylic acid (AA), oxidized guar gum (OGG) and chitosan (CS) was prepared at room temperature through the dynamic redox reaction of nickel chloride (NiCl2) and urushiol (UH). In detail, the reduction group (phenolic hydroxyl) of UH and Ni2+/Ni3+ pair form a semi-quinone/quinone redox dynamic cycle system, allowing the hydrogel to quickly gel at room temperature for 3 min. The catechol group in UH also promotes the hydrogel to have a superior adhesion strength of 25.23 kPa to pig skin and a strong repeated adhesion performance. In addition, the dynamic Schiff base bond created by the interaction of OGG and CS elevated the tensile stress of the hydrogel to 67.54 kPa. After the hydrogel is assembled into the sensor, it has high sensitivity and high stability to different strains, and has great application prospects in the field of actual human health monitoring.

Linear Capacitive Pressure Sensor with Gradient Architecture through Laser Ablation on MWCNT/Ecoflex Film

The practical application of flexible pressure sensors, including electronic skins, wearable devices, human-machine interaction, etc., has attracted widespread attention. However, the linear response range of pressure sensors remains an issue. Ecoflex, as a silicone rubber, is a common material for flexible pressure sensors. Herein, we have innovatively designed and fabricated a pressure sensor with a gradient micro-cone architecture generated by CO2 laser ablation of MWCNT/Ecoflex dielectric layer film. In cooperation with the gradient micro-cone architecture and a dielectric layer of MWCNT/Ecoflex with a variable high dielectric constant under pressure, the pressure sensor exhibits linearity (R2 = 0.990) within the pressure range of 0-60 kPa, boasting a sensitivity of 0.75 kPa-1. Secondly, the sensor exhibits a rapid response time of 95 ms, a recovery time of 129 ms, hysteresis of 6.6%, and stability over 500 cycles. Moreover, the sensor effectively exhibited comprehensive detection of physiological signals, airflow detection, and Morse code communication, thereby demonstrating the potential for various applications.

A chitosan-based conductive double network hydrogel doped by tannic acid-reduced graphene oxide with excellent stretchability and high sensitivity for wearable strain sensors

Conductive hydrogels usually suffer from weak mechanical properties and are easily destroyed, resulting in limited applications in flexible electronics. Concurrently, adding conductive additives to the hydrogel solution increases the probability of agglomeration and uneven dispersion issues. In this study, the biocompatible natural polymer chitosan was used as the network substrate. The rigid network employed was the Cit3-ion crosslinked chitosan (CS) network, and the MBA chemically crosslinked polyacrylamide (PAM) network was used as the flexible network. Tannic acid-reduced graphene oxide (TA-rGO), which has excellent conductivity and dispersibility, is used as a conductive filler. Thus, a CS/TA-rGO/PAM double network conductive hydrogel with excellent performance, high toughness, high conductivity, and superior sensing sensitivity was prepared. The prepared CS/TA-rGO/PAM double network conductive hydrogels have strong tensile properties (strain and toughness as high as 2009 % and 1045 kJ/cm3), excellent sensing sensitivity (GF value was 4.01), a wider strain detection range, high cycling stability and durability, good biocompatibility, and antimicrobial properties. The hydrogel can be assembled into flexible wearable devices that can not only dynamically detect human movements, such as joint bending, facial expression changes, swallowing, and saying, but also recognize handwriting and enable human-computer interaction.